Materials engineering topic list of research papers
-
One electron-controlled multiple-valued dynamic random-access-memory2016 / H. W. Kye, B. N. Song, S. E. Lee, J. S. Kim, S. J. Shin, et al.
-
Optimization of Machining Parameters for Minimization of Roundness Error in Deep Hole Drilling using Minimum Quantity Lubricant2016 / Anis Farhan Kamaruzaman, Azlan Mohd Zain, Noordin Mohd. Yusof, Farhad Nadjarian
-
Coupled gyration modes in one-dimensional skyrmion arrays in thin-film nanostrips as new type of information carrier2017 / Junhoe Kim, Jaehak Yang, Young-Jun Cho, Bosung Kim, Sang-Koog Kim
-
Predicting the viscosity of solids using steady-state creep behavior of the fibrous composites semi-theoretically
Abstract A semi-analytical formulation is presented for obtaining the viscosity of solids (such as metals) using the steady state creep model of the short-fiber composites. For achieving this aim, fluid mechanics theory is used for determining the...
2017 / Vahid Monfared -
Novel Programmable Shape Memory Polystyrene Film: A Thermally Induced Beam-power Splitter2017 / Peng Li, Yu Han, Wenxin Wang, Yanju Liu, Peng Jin, et al.
-
Influence of thermo hydrogen treatment on microstructure and mechanical properties of Ti-5Al-2.5Sn ELI alloy2017 / Ya-fei Ren, Jun Zhao, Hua-sheng Xie, Shi-bing Liu, Yan-chun Lou, et al.
-
Temper Bead Welding of S420G2+M Steel in Water Environment2017 / D. Fydrych, A. Świerczyńska, G. Rogalski, J. Łabanowski
-
Plasmon-mediated Enhancement of Rhodamine 6G Spontaneous Emission on Laser-spalled Nanotextures
Abstract Biosensing characteristics of the laser-spalled nanotextures produced under single-pulse irradiation of a 500-nm thick Ag film surface were assessed by measuring spontaneous emission enhancement of overlaying Rhodamine 6G (Rh6G) molecules...
2017 / A.A. Kuchmizhak, A.V. Nepomnyashchii, O.B. Vitrik, Yu.N. Kulchin -
QFD Design of Machine - made Sand Based on Independent / Decomposition Axiom
Abstract Quality Function Deployment (QFD) and Axiomatic Design (Axiomatic Design, referred to as AD) as two kinds to meet customer needs and the exact needs of customers into the design of the product approach. However, both approaches have their...
2017 / Shuhai Fan, Jiawei Xiong, Tian Xu, SiYu Chen, Wenqian Zhang -
Impact of a Non-linear Transfer Characteristic on the Evaluation of Static Displacements with a MOEMS Transducer
Abstract This contribution describes an opto-mechanical transducer with a non-linear transfer behaviour and its impact on the quantification of static and dynamic displacements in a vibrating measurement mode. The device's output signal is...
2017 / H. Steiner, W. Hortschitz, A. Kainz, M. Stifter, A. Jachimowicz, et al. -
Detection of Vibrodiagnostic Signs of Working Body Acoustic Vibrations in GPA-16R “Ufa” Gas Channel
Abstract This paper discusses the diagnostic signs used to monitor the technical condition of GCU (gas compressor units) in operation. The problem of detecting the impact of GCU design on their wave gas dynamics is solved, as well as detecting...
2017 / I.A. Krivosheev, V.I. Akimov, D.G. Kozhinov -
Tensile Response of Epoxy and Glass/Epoxy Composites at Low and Medium Strain Rate Regimes
Abstract The present research work is to study the effect of low and medium strain rates on tensile behavior of epoxy and glass/epoxy composites. The digital image correlation (DIC) technique is employed for evaluating full-field strain contour...
2017 / S. Gurusideswar, N. Srinivasan, R. Velmurugan, N.K. Gupta -
Intravascular Ultrasound at the Tip of a Guidewire: Concept and First Assembly Steps
Abstract Minimally invasive surgery of the most lethal disease worldwide, coronary artery disease, benefits from better diagnostic tools during the treatment. With this in mind, a novel concept is introduced for intravascular ultrasound on a 360μm...
2017 / Ronald Stoute, Marcus C. Louwerse, Vincent A. Henneken, Ronald Dekker -
Modeling of a Concrete Dam under Earthquake Loading by A Nonlocal Microplane Approach
Abstract The response of concrete under dynamic loading is different from static cases. Substantial increase in strength and changing of crack patterns are observed with an increased loading rate. Modeling of dynamic behavior and failure of concrete ...
2017 / Bobby Rio Indriyantho, Imadeddin Zreid, Michael Kaliske -
Repair of Cracks in Metals: A Review
Abstract Cracks are surface or subsurface fissures that develop in a material. Propagation energy derived from mechanical, thermal, chemical, and metallurgical effects, or a combination of these may influence crack initiation and growth. Various...
2017 / Tawanda Marazani, Daniel M. Madyira, Esther T. Akinlabi -
Using Barkhausen noise to measure coating depth of coated high-speed steel2017 / N. Seemuang, T. Slatter
-
Imidazolium ionic liquid induced one-step synthesis of 𝜶-Fe2O3 nanorods and nanorod assemblies for lithium-ion battery2016 / Shuting Xie, Fei Lu, Shaojie Liu, Liqiang Zheng, Mingliang Jin, et al.
-
Wood-based Multi-material Systems for Technical Applications –Compatibility of Wood from Emerging and Developing Countries
Abstract Lightweight construction with the objectives of weight and resource savings are at present and in the future most important in all engineering systems. One attempt to lowering weight is to change the employed materials. In this topic the...
2017 / Daniel Kohl, Trinh H.N. Long, Stefan Böhm -
Choice of Structural Parameters of Rotary Seal Made from MR-Material
Abstract The structural parameters of an elastic porous material MR used for perspective rotary seals, are analyzed in this article. The porosity value range, also as the wire diameter and the thickness of the elastic sealing element were...
2017 / A.M. Zhizhkin, V.A. Zrelov, V.V. Zrelov, A.Yu. Ardakov, A.A. Osipov -
High-Density Lipoprotein Nanoparticle Imaging in Atherosclerotic Vascular Disease
Summary Nanoparticles promise to advance the field of cardiovascular theranostics. However, their sustained and targeted delivery remains an important obstacle. The body synthesizes some “natural” nanoparticles, including high-density lipoprotein...
2017 / Nicholas J. Leeper, Seung-min Park, Bryan Ronain Smith