Materials engineering topic list of research papers
-
P-type BSI Image Sensor with Active Deep Trench Interface Passivation for Radiation-hardened Imaging Systems
Abstract We propose a P-type back-side-illuminated (BSI) image sensor for applications involving harsh ionizing environment. Its pixel structure implements a hole-collection vertical photodiode and 2T PMOS shared-readout circuitry. It also...
2017 / Bastien Mamdy, Guo-Neng Lu, François Roy -
Failure Analysis of Laminated Composite Skew Laminates
Abstract Failure analysis of laminated composite skew laminates subjected to transverse loads is presented by developing a C0 finite element (FE) model based on higher order shear deformation theory (HSDT). In this theory the transverse shear...
2017 / Ajay Kumar, Anupam Chakrabarti -
Electrically tunable Brillouin fiber laser based on a metal-coated single-mode optical fiber
Abstract We explore tunability of the Brillouin fiber laser employing Joule heating. For this purpose, 10-m-length of a metal-coated single-mode optical cavity fiber has been directly included into an electrical circuit, like a conductor wire. With...
2017 / S.M. Popov, Y.K. Chamorovski, V.A. Isaev, P. Mégret, I.O. Zolotovskii, et al. -
Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process2016 / Wan Farhana Mohamad, Amir Azam Khan, Faiz Ahmad, Abdullah Yassin
-
Transparent ferrimagnetic semiconducting CuCr2O4 thin films by atomic layer deposition2016 / T. S. Tripathi, C. S. Yadav, M. Karppinen
-
Polarity continuation and frustration in ZnSe nanospirals2014 / Luying Li, Fanfan Tu, Lei Jin, Wallace C. H. Choy, Yihua Gao, et al.
-
Thermo-Physical Properties of Selected Inconel2014 / P.K. Krajewski, G. Piwowarski, J. Buraś, W.K. Krajewski, P. Rutkowski, et al.
-
A 3D contact analysis approach for the visualization of the electrical contact asperities2017 / Constantinos C. Roussos, Jonathan Swingler
-
Theoretical analysis of influencing factors on resistance in the process of gas migration in coal seams
Abstract Inspired by previous resistance models for porous media, a resistance expression of gas migration within coal seams based on the ideal matchstick geometry, combined with the Darcy equation and the modified Poiseuille equation is proposed....
2017 / Kai Wang, Ang Liu, Aitao Zhou -
Lightweight graphene nanoplatelet/boron carbide composite with high EMI shielding effectiveness2016 / Yongqiang Tan, Heng Luo, Haibin Zhang, Xiaosong Zhou, Shuming Peng
-
Analytical Behavior of CFST Bridge Piers under Cyclic Loading
Abstract Concrete filled steel tube (CFST) columns are widely used in civil engineering structures due to its abundant structural benefits like excellent seismic behaviour, ultimate load bearing capacity, fire resistivity, excellent ductility and...
2017 / Raghabendra Yadav, Baochun Chen, Huihui Yuan, Zhibin Lian -
Numerical and Experimental Study of the Effect of Orientation and Stacking Sequence on Petalling of Composite Cylindrical Tubes under Axial Compression
Abstract Composite tubes are gradually being used in modern automobile structures, for enhancing structural efficiency and their performance. The energy absorbing ability of composite cylindrical tubes depends on the way in which the tube material...
2017 / M.Nalla Mohamed, A.Praveen Kumar -
Isochemical control over structural state and mechanical properties in Pd-based metallic glass by sputter deposition at elevated temperatures2016 / Daniel J. Magagnosc, Gang Feng, Le Yu, Xuemei Cheng, Daniel S. Gianola
-
Stacking fault expansion from basal plane dislocations converted into threading edge dislocations in 4H-SiC epilayers under high current stress2013 / Kazuya Konishi, Shigehisa Yamamoto, Shuhei Nakata, Yu Nakamura, Yosuke Nakanishi, et al.
-
Design and Implementation of Battery Management System for Electric Bicycle2017 / Muhammad Ikram Mohd Rashid, James Ranggi Anak Johnny Osman
-
Simulation of synaptic short-term plasticity using Ba(CF3SO3)2-doped polyethylene oxide electrolyte film2016 / C. T. Chang, F. Zeng, X. J. Li, W. S. Dong, S. H. Lu, et al.
-
Gas Composition Sensor for Natural Gas and Biogas
Abstract The calorific value of energetic gasses is an important parameter in the quality assessment of gas steams, and can be calculated from the chemical composition of the gas. An array of capacitive sensor electrodes was developed, each...
2017 / Arjen Boersma, Jörgen Sweelsen, Huib Blokland -
3D printed self-driven thumb-sized motors for in-situ underwater pollutant remediation2017 / Fen Yu, Qipeng Hu, Lina Dong, Xiao Cui, Tingtao Chen, et al.
-
Production of Al 2 O 3 –SiC nano-composites by spark plasma sintering
Abstract In this paper, Al2O3–SiC composites were produced by SPS at temperatures of 1600°C for 10min under vacuum atmosphere. For preparing samples, Al2O3 with the second phase including of micro and nano-sized SiC powder were milled for 5h. The...
2017 / Mansour Razavi, Ali Reza Farajipour, Mohammad Zakeri, Mohammad Reza Rahimipour, Ali Reza Firouzbakht -
Review. The role of peroxisome proliferator-activated receptor in the treatment of non-alcoholic fatty liver disease2017 / Xin Sun, Yan Zhang, Meilin Xie