Materials engineering topic list of research papers
-
Numerical Heat Transfer Study of Turbulent Tube Flow through Winglet-pairs
Abstract A numerical investigation on heat transfer behaviors in a constant heat-fluxed round tube inserted with winglet vortex generators is conducted. Air as the working medium flows through the tube for Reynolds numbers (Re) between 4000 and...
2016 / Sombat Tamna, Somchai Sripattanapipat, Pongjet Promvonge -
Polarization-controllable Airy beams generated via a photoaligned director-variant liquid crystal mask2015 / Bing-Yan Wei, Peng Chen, Wei Hu, Wei Ji, Li-Yang Zheng, et al.
-
Alginate/Carboxymethyl Cellulose Hydrogel Films in Relation to Crosslinking with Glutaraldehyde and Copper Sulfate2015 / Watcharee Sritweesinsub, Sireerat Charuchinda
-
High temperature formability of graphene nanoplatelets-AZ31 composites fabricated by stir-casting method
Abstract Outstanding mechanical properties of graphene nanoplatelets (GNPs) make them ideal reinforcement for mass production of composites. In this research, the composites were fabricated by stir-casting method. GNPs were added in 1.5 and 3.0 wt.% ...
2016 / Muhammad Rashad, Fusheng Pan, Yanglu Liu, Xianhua Chen, Han Lin, et al. -
Blood flow and microgravity
Abstract The absence of gravity during space flight can alter cardio-vascular functions partially due to reduced physical activity. This affects the overall hemodynamics, and in particular the level of shear stresses to which blood vessels are...
2016 / Lionel Bureau, Gwennou Coupier, Frank Dubois, Alain Duperray, Alexander Farutin, et al. -
Different strategies of secondary phase incorporation into metallic sheets by friction stir processing in developing surface composites2016 / Ratna Sunil B.
-
Direct Observation of the Biaxial Stress Effect on Efficiency Droop in GaN-based Light-emitting Diode under Electrical Injection2015 / Jinjian Zheng, Shuiqing Li, Chilun Chou, Wei Lin, Feilin Xun, et al.
-
Three-dimensional nonlinear micro/meso-mechanical response of the fibre-reinforced polymer composites
Abstract A three-dimensional multi-scale computational homogenisation framework is developed for the prediction of nonlinear micro/meso-mechanical response of the fibre-reinforced polymer (FRP) composites. Two dominant damage mechanisms, i.e. matrix ...
2016 / Z. Ullah, L. Kaczmarczyk, C.J. Pearce -
Shape control of spacecraft formation using a virtual spring-damper mesh
Abstract This paper derives a distance-based formation control method to maintain the desired formation shape for spacecraft in a gravitational potential field. The method is an analogy of a virtual spring-damper mesh. Spacecraft are connected...
2016 / Qifeng Chen, Yunhe Meng, Jianjun Xing -
Effect of WC/Co coherency phase boundaries on Fracture toughness of the nanocrystalline cemented carbides2016 / Hongxian Xie, Xiaoyan Song, Fuxing Yin, Yongguang Zhang
-
Ab initio calculations of structural and magnetic properties of Ni-Co-Mn-Cr-Sn alloys2015 / Mikhail Zagrebin, Vladimir Sokolovskiy, Elizaveta Smolyakova, Vasiliy Buchelnikov
-
Microstructure and Tribological Behaviour of CrCuFeNiTi High Entropy Alloys2016 / Kehinde Sobiyi, Michael Bodunrin, Esther Akinlabi, Babatunde Obadele
-
Experimental Studies of Dimpled Surface Effect on the Performance of Linear Cascade under Different Incidence Angles
Abstract In this paper, preliminary experiments were conducted to investigate the effect of dimpled surface on the performance of linear cascade. Two dimple configurations with a diameter of 1.0mm and a depth-diameter ratio of 0.2, which were...
2016 / Yanfeng Zhao, Huawei Lu, Yuwen Sun -
Revealing martensitic transformation and α/β interface evolution in electron beam melting three-dimensional-printed Ti-6Al-4V2016 / Xipeng Tan, Yihong Kok, Wei Quan Toh, Yu Jun Tan, Marion Descoins, et al.
-
Developing the Digital Manufacturing Commons: A National Initiative for US Manufacturing Innovation
Abstract The manufacturing sector is at the core of the American economy. With American leadership in advanced manufacturing at risk due to changes in the global economy and new competitors rising across the globe, the U.S. President announced an...
2016 / B. Beckmann, A. Giani, J. Carbone, P. Koudal, J. Salvo, et al. -
Recycling of Battery Technologies – Ecological Impact Analysis Using Life Cycle Assessment (LCA)
Abstract By the means of life cycle assessment (LCA), the ecological impact of recycling and reuse of materials of three battery technologies was analyzed: lead acid, lithium-ion and vanadium redox flow. Reuse of materials is considered through a...
2016 / Lea Unterreiner, Verena Jülch, Sören Reith -
Stress-induced transformation in a Ni-Mn-In alloy and the concomitant change of resistivity2015 / V.V. Kokorin, S.M. Konoplyuk, A. Dalinger, S. Thürer, G. Gerstein, et al.
-
Design of Solar Inverter Based on CPLD
Abstract In this paper, the design and implementation of complex programmable logic device (CPLD) based solar inverter which generates power of AC 110 volts is proposed. In this framework, the former adopt DC to DC boost convert circuit and the...
2016 / Yi-You Hou, Hung-Hsiang Tsai, Chu-Yi Wang, Kun-Xu Lee, Wen-Sheng Hsiao -
Nano and hybrid aluminum based metal matrix composites: an overview2015 / Aniruddha V. Muley, S. Aravindan, I.P. Singh
-
Rapid, low cost prototyping of transdermal devices for personal healthcare monitoring
Abstract The next generation of devices for personal healthcare monitoring will comprise molecular sensors to monitor analytes of interest in the skin compartment. Transdermal devices based on microneedles offer an excellent opportunity to explore...
2016 / Sanjiv Sharma, Anwer Saeed, Christopher Johnson, Nikolaj Gadegaard, Anthony EG Cass