Materials engineering topic list of research papers
-
The simulation of carbon material structure based on polyacrylonitrile obtained under IR heating
Abstract Since recently an economically efficient method including IR heating has been used for the synthesis of polymer based functional carbon nanocrystalline materials. One of the most widely used polymers having a broadest range of...
2016 / Lev V. Kozhitov, Nguen Kh. V׳et, Anna V. Kostikova, Irina V. Zaporotskova, Vladimir V. Kozlov -
Hydrogen separation through tailored dual phase membranes with nominal composition BaCe0.8Eu0.2O3-δ:Ce0.8Y0.2O2-δ at intermediate temperatures2016 / Mariya E. Ivanova, Sonia Escolástico, Maria Balaguer, Justinas Palisaitis, Yoo Jung Sohn, et al.
-
Biomineralization of a calcifying ureolytic bacterium Microbacterium sp.GM-1
Abstract Background Biomineralization is a significant process performed by living organisms in which minerals are produced through the hardening of biological tissues. Herein, we focus on calcium carbonate precipitation, as part...
2016 / Guojing Xu, Dongwei Li, Binquan Jiao, Dou Li, Yajie Yin, et al. -
Interfacial effect on physical properties of composite media: Interfacial volume fraction with non-spherical hard-core-soft-shell-structured particles2015 / Wenxiang Xu, Qinglin Duan, Huaifa Ma, Wen Chen, Huisu Chen
-
Long-term load forecast modelling using a fuzzy logic approach
Abstract The importance of long-term load forecasting in the power industries cannot be over-emphasised, as it provides the industries with future power demand that may be useful in generating, transmitting and distributing power reliably and...
2016 / Danladi Ali, Michel Yohanna, M.I. Puwu, B.M. Garkida -
Influence of Laser Heat Treatment on Machinability of Ti6Al4V Alloy
Abstract Titanium alloys are most extensively used in biomedical application, which need high degree of dimensional accuracy and good machinability to reduce manufacturing cost. Both of these necessities can be addressed by surface and sub-surface...
2016 / Sagar Telrandhe, Ashish K. Saxena, Pavan Sutar, Sushil Mishra -
Energetics of vacancy segregation to [100] symmetric tilt grain boundaries in bcc tungsten2016 / Nanjun Chen, Liang-Liang Niu, Ying Zhang, Xiaolin Shu, Hong-Bo Zhou, et al.
-
Mechanical Fracturing of Core-Shell Undercooled Metal Particles for Heat-Free Soldering2016 / Simge Çınar, Ian D. Tevis, Jiahao Chen, Martin Thuo
-
Approaching the ideal elastic strain limit in silicon nanowires2016 / H. Zhang, J. Tersoff, S. Xu, H. Chen, Q. Zhang, et al.
-
Three-Dimensional Structure of a Simple Liquid at a Face-Centered-Cubic (001) Solid Surface Interface2016 / Luyao Bao, Haibao Hu, Jun Wen, Paavo Sepri, Kai Luo
-
Active Anti-erosion Protection Strategy in Tamarisk (Tamarix aphylla)2013 / Zhiwu Han, Wei Yin, Junqiu Zhang, Shichao Niu, Luquan Ren
-
Reconfigurable logic via gate controlled domain wall trajectory in magnetic network structure2016 / C. Murapaka, P. Sethi, S. Goolaup, W. S. Lew
-
High-purity core-shell α″-Fe16N2/Al2O3 nanoparticles synthesized from α-hematite for rare-earth-free magnet applications
Abstract α″-Fe16N2 nanoparticles (NPs) have been identified as one of the most promising rare-earth-free magnetic materials and synthesized with high purity in laboratory investigation recently. This study reports characteristics and magnetic...
2016 / Takashi Ogi, Qing Li, Shinji Horie, Akito Tameka, Toru Iwaki, et al. -
Structures, properties, and energy-storage mechanisms of the semi-lunar process cuticles in locusts2016 / Chao Wan, Zhixiu Hao, Xiqiao Feng
-
16 Years of RoboCup Rescue2016 / Raymond Sheh, Sören Schwertfeger, Arnoud Visser
-
An empirical study of DSRC V2V performance in truck platooning scenarios
Abstract Among many safety applications enabled by Dedicated Short Range Communication (DSRC), truck platooning provides many incentives to commercial companies. This paper studies DSRC Vehicle-to-Vehicle (V2V) performance in truck platooning...
2016 / Song Gao, Alvin Lim, David Bevly -
All-optical flip-flop based on coupled SOA-PSW2016 / Lina Wang, Yongjun Wang, Chen Wu, Fu Wang
-
Water Purification in Micromagnetofluidic Devices: Mixing in MHD Micromixers
Abstract This contribution addresses a possible solution for water purification from heavy metals by magnetic nanoparticles in microfluidic water flow systems. In this technique, the most important component is the micromixer while efficient mixing...
2016 / Nikolitsa Kefou, Evangelos Karvelas, Konstantinos Karamanos, Theodoros Karakasidis, Ioannis E. Sarris -
Energy-saving Operation and Optimization of Thermal Comfort in Thermal Radiative Cooling/Heating System
Abstract The energy-saving operation in the thermal radiative cooling/heating system has been verified. The coefficient of performance (COP) has been experimentally evaluated by changing the water temperature and the flow rate to control the heat...
2016 / Akihiro Satake, Hiroaki Ikegami, Yasunori Mitani -
Microstructural and mechanical characterizations of new Ni-Ti endodontic instruments2015 / Laurence Jordan, Anthony Sultan, Philippe Vermaut