Materials engineering topic list of research papers
-
A Distributed Hunting Approach for Multiple Autonomous Robots2013 / Zhiqiang Cao, Chao Zhou, Long Cheng, Yuequan Yang, Wenwen Zhang, et al.
-
Shear-banding Induced Indentation Size Effect in Metallic Glasses2016 / Y. M. Lu, B. A. Sun, L. Z. Zhao, W. H. Wang, M. X. Pan, et al.
-
The injection of a screw dislocation into a crystal: Atomistics vs. continuum elastodynamics
Abstract The injection (creation) process of a straight screw dislocation is compared atomistically with elastodynamic continuum theory. A method for injecting quiescent screw dislocations into a crystal of tungsten is simulated using...
2016 / J. Verschueren, B. Gurrutxaga-Lerma, D.S. Balint, D. Dini, A.P. Sutton -
Observation of a Ag protrusion on a Ag2S island using a scanning tunneling microscope
Abstract A silver sulfide (Ag2S) island as an ionic conductor in resistive switching memories was formed and a protrusion of silver from the Ag2S formed by an electrochemical reaction was observed using a scanning tunneling microscope. ...
2015 / Takeo Ohno, Tsuyoshi Hasegawa -
Structural Health Monitoring Using Lamb Wave Reflections and Total Focusing Method for Image Reconstruction2016 / Aurelia Muller, Bradley Robertson-Welsh, Patrick Gaydecki, Matthieu Gresil, Constantinos Soutis
-
A Fe-C-Ca big cycle in modern carbon-intensive industries: toward emission reduction and resource utilization2016 / Yongqi Sun, Seetharaman Sridhar, Seshadri Seetharaman, Hao Wang, Lili Liu, et al.
-
A Method Of Calculating Thermal Diffusivity And Conductivity For Irregularly Shaped Specimens In Laser Flash Analysis2016 / Jerzy Szałapak, Konrad Kiełbasiński, Jakub Krzemiński, Anna Młożniak, Elżbieta Zwierkowska, et al.
-
A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale
Abstract Material properties such as hardness can be dependent on the size of the indentation load when that load is small, a phenomenon known as the indentation size effect (ISE). In this work an inverse finite element method (IFEM) is used to...
2016 / X Chen, I A Ashcroft, R D Wildman, C J Tuck -
Development and Modelling of the Method of Mandrelless Small-Radius Tube Bending / Opracowanie I Modelowanie Sposobu Beztrzpieniowego Gięcia Rur Na Małych Promieniach2016 / J. Michalczyk, K. Wojsyk
-
Microgravity metal processing: from undercooled liquids to bulk metallic glasses2015 / Douglas C Hofmann, Scott N Roberts
-
Cost-saving Environmental Activities on Construction Site – Cost Efficiency of Waste Management: Case Study
Abstract Realization of Millennium Development Goals should be also reflected in construction industry. Sustainable consumption and production patterns can be associated with implementing and developing reverse logistics system on construction site...
2016 / Anna Sobotka, Joanna Sagan -
Fatigue crack growth rates for offshore wind monopile weldments in air and seawater: SLIC inter-laboratory test results
Abstract The majority of fatigue crack growth (FCG) data sets available on steels in air and seawater environments are several decades old and may not be appropriate for structural integrity assessment of offshore wind turbine foundations, which are ...
2016 / Ali Mehmanparast, Feargal Brennan, Isaac Tavares -
Unified Approach in Design and Manufacturing Optimization of Hybrid Metal-composites Parts
Abstract An optimization strategy is described herein for the design and manufacturing of parts, combining composites and metals. The design stages of such parts, as well as the modelling procedures, required in each stage, are presented. More...
2016 / Panagis Foteinopoulos, Panagiotis Stavropoulos, Alexios Papacharalampopoulos, George Chryssolouris -
Relation between bandgap and resistance drift in amorphous phase change materials2015 / Martin Rütten, Matthias Kaes, Andreas Albert, Matthias Wuttig, Martin Salinga
-
Titanium-niobium pentoxide composites for biomedical applications
Abstract The strength of titanium scaffolds with the introduction of high porosity decreases dramatically and may become inadequate for load bearing in biomedical applications. To simultaneously meet the requirements of biocompatibility, low elastic ...
2016 / Yuncang Li, Khurram S. Munir, Jixing Lin, Cuie Wen -
Bonding-restricted structure search for novel 2D materials with dispersed C2 dimers2016 / Cunzhi Zhang, Shunhong Zhang, Qian Wang
-
Flutter Phenomenon in Flow Driven Energy Harvester–A Unified Theoretical Model for “Stiff” and “Flexible” Materials2016 / Yu Chen, Xiaojing Mu, Tao Wang, Weiwei Ren, Ya Yang, et al.
-
Artificially produced rare-earth free cosmic magnet2015 / Akihiro Makino, Parmanand Sharma, Kazuhisa Sato, Akira Takeuchi, Yan Zhang, et al.
-
Comparative study between crack closure model and Willenborg model for fatigue prediction under overload effects
Abstract A comparative study is performed between a crack closure model and the Willenborg model, which can calculate the fatigue crack growth rate under the overload effects. The modified virtual crack annealing (VCA) model is briefly reviewed,...
2016 / Shan Jiang, Wei Zhang, Jingjing He, Zili Wang -
Synthetic biology of microbes synthesizing polyhydroxyalkanoates (PHA)
Abstract Microbial polyhydroxyalkanoates (PHA) have been produced as bioplastics for various purposes. Under the support of China National Basic Research 973 Project, we developed synthetic biology methods to diversify the PHA structures into homo-, ...
2016 / Guo-Qiang Chen, Xiao-Ran Jiang, Yingying Guo