Materials engineering topic list of research papers
-
Improving the Assembly of Ballscrews Using Analysis of Interactions between the Working Parts
Abstract The research considers the conditions for the rational dimension ratio of ballscrews with design parameters of screws and nuts, which allow the increasing the carrying capacity without upgrading the accuracy of the details in the assembly...
2016 / B.M. Iznairov, A.V. Korolev, A.A. Korolev -
Classification and Simulation Method for Piezoelectric PVDF Sensors
Abstract The piezoelectric polymer Polyvinylidene fluoride (PVDF) holds the potential to be the core material of novel structure-borne sound sensors not only in research but also in industrial applications. This paper will give an overview of...
2016 / Klaas Hauke Baumgärtel, Daniel Zöllner, Karl-Ludwig Krieger -
Fiber Laser Microcutting of AISI 316L Stainless Steel Tubes- influence of Pulse Energy and Spot Overlap on Back Wall Dross
Abstract The design of coronary stents imposes high demands in terms of dimensional tolerance and surface finish. These devices are manufactured by laser microcutting of miniature tubes in materials such as stainless steel, cobalt chromium alloys...
2016 / García-López Erika, Medrano-Tellez Alexis, Ibarra-Medina Juansethi, Siller Héctor R., Elías-Zúñiga Alex, et al. -
Computational Study of Hypersonic Flow Past Spiked Blunt Body Using RANS and DSMC Method
Abstract Hypersonic vehicles when moving at very high speeds experience the problem of drag and heating. One of the ways to reduce this drag and heating is by the use of an aerospike. In the present study, the flow around a blunted body fitted with...
2016 / Jiss J. Sebastian, Sandeep Eldho James, Abhilash Suryan -
Internal Friction and Microstructure of Ti and Ti-Mo Alloys Containing Oxygen2016 / J.R.S. Martins, R.O. Araújo, R.A. Nogueira, C.R. Grandini
-
Analysis of Heavy Metal Ions in Potable Water Using Soft Computing Technique
Abstract The water quality analysis has been an intriguing subject in the recent years because of the issues related to water resources. The work presents the application of the genetic algorithm to water samples containing contaminants for the...
2016 / Rashmi Karkra, Prashant Kumar, Baban K.S. Bansod, C. Rama Krishna -
Hydrogenated vacancies lock dislocations in aluminium2016 / Degang Xie, Suzhi Li, Meng Li, Zhangjie Wang, Peter Gumbsch, et al.
-
Evolution of solidification texture during additive manufacturing2015 / H. L. Wei, J. Mazumder, T. DebRoy
-
Measurement and Modeling of Short and Medium Range Order in Amorphous Ta2O5 Thin Films2016 / Badri Shyam, Kevin H. Stone, Riccardo Bassiri, Martin M. Fejer, Michael F. Toney, et al.
-
Probability hypothesis density filter with adaptive parameter estimation for tracking multiple maneuvering targets
Abstract The probability hypothesis density (PHD) filter has been recognized as a promising technique for tracking an unknown number of targets. The performance of the PHD filter, however, is sensitive to the available knowledge on model parameters...
2016 / Jinlong Yang, Le Yang, Yunhao Yuan, Hongwei Ge -
Microstructural and Chemical Rejuvenation of a Ni-Based Superalloy2016 / Zhiqi Yao, Craig C. Degnan, Mark A. E. Jepson, Rachel C. Thomson
-
Low-Energy Amorphization of Ti1Sb2Te5 Phase Change Alloy Induced by TiTe2 Nano-Lamellae2016 / Keyuan Ding, Feng Rao, Shilong Lv, Yan Cheng, Liangcai Wu, et al.
-
P-Channel InGaN/GaN heterostructure metal-oxide-semiconductor field effect transistor based on polarization-induced two-dimensional hole gas2016 / Kexiong Zhang, Masatomo Sumiya, Meiyong Liao, Yasuo Koide, Liwen Sang
-
Effectively control negative thermal expansion of single-phase ferroelectrics of PbTiO3-(Bi,La)FeO3 over a giant range2013 / Jun Chen, Fangfang Wang, Qingzhen Huang, Lei Hu, Xiping Song, et al.
-
Layered polymeric nitrogen in RbN3 at high pressures2015 / Xiaoli Wang, Jianfu Li, Ning Xu, Hongyang Zhu, Ziyu Hu, et al.
-
Multi-Mode Physical Modelling of a Drum Boiler
Abstract Multi-mode modelling and simulation is the ability to switch between states that describe different operating conditions, for instance: turning subsystems on or off, phase appearance or disappearance (e.g. vapor within liquid), switching to ...
2016 / Daniel Bouskela -
Suppressing molecular vibrations in organic semiconductors by inducing strain2016 / Takayoshi Kubo, Roger Häusermann, Junto Tsurumi, Junshi Soeda, Yugo Okada, et al.
-
Phase Investigations Under Steam Oxidation Process at 800 °C for 1000 h of Advanced Steels and Ni-Based Alloys2016 / T. Dudziak, V. Deodeshmukh, L. Backert, N. Sobczak, M. Witkowska, et al.
-
Inversion of diffraction data for amorphous materials2016 / Anup Pandey, Parthapratim Biswas, D. A. Drabold
-
Video-based construction vehicles detection and its application in intelligent monitoring system
Abstract While vehicle detection on highways has been reported before, to the best of our knowledge, intelligent monitoring system that aims at detecting hydraulic excavators and dump trucks on state-owned land has not been explored thoroughly yet....
2016 / Wenyang Ji, Lingjun Tang, Dedi Li, Wenming Yang, Qingmin Liao