Materials engineering topic list of research papers
-
Development of Non Sodium Silicate Flyash-based Geopolymer Film for Preliminary Urea Diffusion Study
Abstract Geopolymer is a material that involves natural occurring silico-aluminates and is based on the chemistry of alkali-activated inorganic binders. In this works, geopolymer is produced from flyash as raw material and low concentration of KOH...
2016 / Tia Rahmiati, Khairun Azizli, Zakaria Man -
Isotropic plasticity of β-type Ti-29Nb-13Ta-4.6Zr alloy single crystals for the development of single crystalline β-Ti implants2016 / Koji Hagihara, Takayoshi Nakano, Hideaki Maki, Yukichi Umakoshi, Mitsuo Niinomi
-
Disposal of Synthetic Surfactants-Containing Wastewater Treatment Sludge in the Ceramic Brick Production
Abstract The results of studies on the using the carbonate slurry purification surfactants-containing model solutions as the entrained additive in the production of wall ceramics are introduced here. For wastewater purification a thermally modified...
2016 / S.V. Sverguzova, Zh.A. Sapronova, I.V. Starostina -
Practical Test on a Closed Sorption Thermochemical Storage System with Solar Thermal Energy
Abstract This paper presents the actual status of the experiments done with a large scale adsorption thermochemical storage system of a 750 liter volume in combination with solar thermal heat pipes as well as recent results of cyclic tests done on...
2016 / Asnakech Lass-Seyoum, Dmitry Borozdenko, Thomas Friedrich, Timo Langhof, Simone Mack -
Algorithm and experiments of six-dimensional force/torque dynamic measurements based on a Stewart platform
Abstract Stewart platform (SP) is a promising choice for large component alignment, and interactive force measurements are a novel and significant approach for high-precision assemblies. The designed position and orientation (P&O) adjusting...
2016 / Ke Wen, Fuzhou Du, Xianzhi Zhang -
Development of eco-friendly and lightweight insulation panels for offshore plant2016 / Jae-Deok Jung, Suk-Yoon Hong, Jee-Hun Song, Hyun-Wung Kwon, Won-Ho Joo, et al.
-
Quasi-static Axial Crushing Behavior of Thin-walled Circular Aluminum Tubes with Functionally Graded Thickness
Abstract In this paper, the crushing behavior of circular aluminum thin-walled tubes with functionally graded thickness (FGT) are investigated experimentally. To this aim, three different thickness grading patterns are introduced to the longitudinal ...
2016 / Muhammed Emin Erdin, Cengiz Baykasoglu, Merve Tunay Cetin -
A Dynamic Network Analysis of the Physiological State of Foodborne Pathogens: Application to Escherichia Coli During Osmotic Stress and Comparison with Salmonella Typhimurium
Abstract To characterise the physiological state of cells during adaptation to osmotic stress, we decompose the dynamic regulatory network of E. coli into subgraphs. We then compare the results of E. coli and Salmonella. Beside the sigma factor...
2016 / A. Métris, S. George, J. Baranyi -
Robust Precoded OSTBC for GFDM Systems
Abstract Generalized Frequency Division Multiplexing (GFDM) has been proposed recently as a candidate for the next generation wireless communications systems (5G) due to its attractive properties that seem to cover the envisioned applications. In...
2016 / Shravan Kumar Bandari, V.V. Mani, A. Drosopoulos -
The Research on Community Energy Potential of Liaobin Coastal Economic Zone
Abstract The energy supply characteristics and architectural features in Liaobin coastal economic zone are studied to achieve the energy efficient utilization and the balance of supply and demand in regional energy. The integrated resources planning ...
2016 / Guohui Feng, Chuan Tian, Shuai Li -
Silicon Heterojunction Solar Cells Combining an a-Si:H (n) Electron-collector with a PEDOT:PSS Hole-collector
Abstract We combine PEDOT:PSS as hole-selective layer on c-Si with a well-passivating electron-selective a-Si:H(n) layer in an alternative type of silicon heterojunction solar cell. As the interface between the PEDOT:PSS and the c-Si substrate plays ...
2016 / Ralf Gogolin, Dimitri Zielke, Wilfried Lövenich, Rüdiger Sauer, Jan Schmidt -
Numerical Modelling of Microstructure Evolution in Ti6Al4V Alloy by Ultrasonic Assisted Cutting
Abstract This paper aims to reveal the influence of ultrasonic assisted cutting (UAC) on the microstructure of machined surface in Ti6Al4V alloy. In order to investigate the microstructure evolution, an enhanced material constitutive model with the...
2016 / Wei Bai, Ronglei Sun, Jürgen Leopold -
Stretchable Materials for Robust Soft Actuators towards Assistive Wearable Devices2016 / Gunjan Agarwal, Nicolas Besuchet, Basile Audergon, Jamie Paik
-
Multiscale study of morphology of the fracture surface aluminum-magnesium alloy with consecutive dynamic and gigacycle loading
Abstract In this paper we investigated the influence of consecutive dynamic and gigacycle fatigue loads on the lifetime of aluminum-magnesium alloy AlMg6. Preloading of samples was achieved during dynamic tensile tests in the split-Hopkinson bar...
2016 / Vladimir Oborin, Mikhail Sokovikov, Dmitry Bilalov, Oleg Naimark -
Technology of High-speed Direct Laser Deposition from Ni-based Superalloys
Abstract Recently, additive manufacturing is the one of most perspective technologies; it can replace conventional methods of casting and subsequent time-consuming machining. One of the most interesting additive technologies - high-speed direct...
2016 / Olga Klimova-Korsmik, Gleb Turichin, Evgeniy Zemlyakov, Konstantin Babkin, Pavel Petrovsky, et al. -
Climate Ribbon™, Brickell City Center Miami, Job Report
Abstract In the new Brickell City Center the public spaces between the retail shops are covered by an open steel glass structure. The primary structure consists of triangular surfaces which are inclined towards each other. Below this transparent...
2016 / Bernd Stimpfle, Michael Schäffer -
Electrical and Structural Properties of Aluminium Doped tin Oxide Codoped with Sulphur for Solar Energy
Abstract Thin films of Tin Oxide co-doped with 28 atomic percentages of Aluminium (i.e. 28 at% Al) and varied concentration of Sulphur were prepared on 1mm thick, 1cm by 1cm glass substrates at 470 0C by Spray Pyrolysis technique. Films were...
2016 / Valentine Wabwire Muramba, Maxwell Mageto -
Metal Release of Multilayer Coatings by Physical Vapour Deposition (PVD)
Abstract Orthopaedic implants are mostly fabricated by Stainless Steel, Titanium, and Ni-Cr Alloys that consist of Chromium (Cr), Cobalt (Co), Nickel (Ni) and Molybdenum (Mo). 10-15% of population are affected by metals (Ni, Co, Cr, Mo)...
2016 / Mohd. Zakuan Bin Abdullah, Mohamad Azmirrudin Ahmad, Ahmad Nizam Abdullah, Mohamad Hazri Othman, Patthi Hussain, et al. -
Long Term Cyclic Response of a Soil-Cement Mixture: Experimental Study and Modelling
Abstract Soil and granular materials stabilization with hydraulic cements is an interesting solution as stiffness and strength are highly improved. It is especially attractive when high traffic loads with considerable number of passages are expected ...
2016 / Fabrizio Panico, António Viana da Fonseca -
Detailed Study of Bridges Out of Thin Walled Precast Concrete Elements
Abstract Due to the very competitive costs compared to in-situ concrete as well as to steel elements, the precise executions and the economic value, precast elements are able to not only reduce the construction period but also reduce construction...
2016 / Sara Reichenbach, Johann Kollegger