Materials engineering topic list of research papers
-
Comparison of Power Loss Due to Corona Phenomena Model with Peek's Formula in High Voltage 115 kV and 230 kV System
Abstract This paper studied the power loss due to corona phenomenon with Gary's model and Peek's formula using Matlab program for the power loss simulation in 115 kV and 230 kV system that the corona loss varies with transmission conductor radius...
2016 / Kittipong Tonmitr, Tharin Ratanabuntha -
Developing bioenergy to tackle climate change
Abstract Biomass energy would become the most potential renewable energies, for whether wind power or photovoltaic, would be restricted by the nature thus cannot provide stable power, while biomass energy is the only renewable energy that can be...
2016 / Xiao-Yang Zhang -
Deformation Behavior and Microstructure of Ti6Al4V Manufactured by SLM
Abstract Mechanical properties, porosity, and microstructure of Ti6Al4V (ELI) material produced by Selective Laser Melting (SLM) under controlled oxygen content were analyzed. Fully martensitic α’structure with high dislocation density and stacking...
2016 / P. Krakhmalev, G. Fredriksson, I. Yadroitsava, N. Kazantseva, A. du Plessis, et al. -
Wave interaction with Very Large Floating Structure (VLFS) using BEM approach – Revisited
Summary In the present study, a brief discussion on the hydroelastic analysis of VLFS using Boundary Element Method (BEM) with basic assumptions, boundary conditions and support conditions required are presented. An overview of present scenario...
2016 / Anoop I. Shirkol, T. Nasar, D. Karmakar -
Maximising Product Possibilities While Minimising Process Change: A Case of Introducing Light Weight Material in Automotive Manufacturing
Abstract Companies are challenged to achieve maximised benefits in time, money and novelty when introducing new products or technologies into their existing manufacturing systems. This paper set the focus on the introduction of new materials into...
2016 / Patrick Denzler, Magnus Wiktorsson -
The Research of Wind Loads on Buildings and Structures with Increased Level of Responsibility
Abstract The article investigates the impact of wind on building construction-increased degree of responsibility. List the main methods for studying of wind loads applied to the present problem. The article describes experimental studies of wind...
2016 / Pavel Churin, Vladislav Pomelov, Olga Poddaeva -
Effect of Spraying Pressure on Spray Cooling Enhancement of Beryllium-Copper Alloy Plate
Abstract Spray cooling technology relying on phase change mechanism has a notable ability to remove high heat fluxes. Particular problems are experienced when cooling from the high temperature, stable film boiling regime through Leidenfrost to...
2016 / Hocine Mzad, Rabia Khelif -
On propagation of interface cracks in bi-layered strip in relation to delamination of coatings from substrates of final thickness
Abstract The problem of a coatings delamination from a substrate is considered. Both the delaminated part of the coating and substrate are modelled as plates with a special attention to the boundary conditions, which are considered as generalized...
2016 / K.B. Ustinov -
Polar Superhelices in Ferroelectric Chiral Nanosprings2016 / Takahiro Shimada, Le Van Lich, Koyo Nagano, Jian-Shan Wang, Jie Wang, et al.
-
Closed-loop Process Control for Laser Patterning of Thin Film Strain Sensors
Abstract This work presents a laser based bridge balancing method for strain sensor circuits which are applied directly on component surfaces by means of thin film deposition and laser patterning. The balancing process is integrated in the...
2016 / J.F. Düsing, J. Koch, O. Suttmann, L. Overmeyer -
Lifespan Extension for Environmental Benefits: A new Concept of Products with Several Distinct Usage Phases
Abstract End-of-Life (EoL) strategies, and especially products’ lifespan extension, are becoming key issues for more and more manufacturers. Their implementations have to be done from the design stage and may be facilitated with design methodologies ...
2016 / Tom Bauer, Guillaume Mandil, Élise Naveaux, Peggy Zwolinski -
The artificial retina for track reconstruction at the LHC crossing rate
Abstract We present the results of an R&D study for a specialized processor capable of precisely reconstructing events with hundreds of charged-particle tracks in pixel and silicon strip detectors at 40 MHz, thus suitable for processing LHC...
2016 / A. Abba, F. Bedeschi, M. Citterio, F. Caponio, A. Cusimano, et al. -
Resource Aware Placement of Data Analytics Platform in Fog Computing
Abstract Fog computing is an extension of cloud computing right to the edge of the network, and seeks to minimize service latency and average response time in applications, thereby enhancing the end-user experience. However, there still is the need...
2016 / Mohit Taneja, Alan Davy -
Optimized design of micromachined electric field mills to maximize electrostatic field sensitivity
Abstract This paper describes the design optimization of a micromachined electric field mill, in relation to maximizing its output signal. The cases studied are for a perforated electrically grounded shutter vibrating laterally over sensing...
2016 / Yu Zhou, Cyrus Shafai -
Fatigue crack development in a low-carbon steel. Microstructure influence. Modelling
Abstract Fatigue in a low-carbon steel with ferrite and pearlite microstructure is investigated through testing of three groups of specimens. Two of the groups consist of cylindrical specimens subjected to tension-tension and rotating-bending...
2016 / Donka Angelova, Rozina Yordanova, Svetla Yankova -
Acoustic Conditions in the Atrium of Slovak Philharmonic
Abstract Musical performances, conferences, receptions or other events when many people gather can take place in different types of rooms and large shopping centrums, atria or city courtyards are not an exception. Continental weather however,...
2016 / Monika Rychtáriková, Vojtech Chmelík, Daniel Urbán, Andrea Vargová -
Airline Route Profitability Analysis and Optimization Using BIG DATA Analyticson Aviation Data Sets under Heuristic Techniques
Abstract Applying vital decisions for new airline routes and aircraft utilization are important factors for airline decision-making. For data driven analysis key points such as airliners route distance, availability on seats/freight/mails and fuel...
2016 / E. Kasturi, S. Prasanna Devi, S. Vinu Kiran, S. Manivannan -
Fluid-Structure Interaction Based Adhesion Failure Analysis of Bonded Tubular Socket Joints
Abstract Computational Fluid Dynamics (CFD) and Fluid-Structure Interaction (FSI) based modelling and simulation techniques have been developed in the present research to investigate adhesion failure analysis in bonded tubular socket joints. Joint...
2016 / R.R. Das, N. Baishya, K. Verma, A. Choudhary -
The Differences in Programming Production of Thin Walled Components through Various CAM Programs
Abstract The article deals with differences the programming of production of thin-walled parts using CAM applications for industrial production. Were compared by the amount of time and the number of clicks buttons during which the G codes generated...
2016 / Michalik Peter, Knežo Dušan, Hutyrova Zuzana, Mital Dusan, Nowakowski Lukasz -
The bi-material circular disc compressed between the jaws of the ISRM standardized apparatus for the Brazilian test
Abstract The mechanical response of a circular bi-material disc, squeezed between circular jaws, is studied numerically. The disc is composed by two identical (from the geometric point of view) almost semi-circular discs joined together with the aid ...
2016 / Ch. F. Markides, E.D. Pasiou, S.K. Kourkoulis