Materials engineering topic list of research papers
-
Prediction of the Principal Stress Direction for 5-axis Ball End Milling
Abstract While regenerating damaged components, e.g. compressor blades, the removal of excess weld material called re-contouring often determines the surface integrity including the residual stress state. A load-specific residual stress state is...
2016 / V. Böß, T. Grove, B. Denkena, A. Mücke, D. Nespor -
Fabrication of nanoscale speckle using broad ion beam milling on polymers for deformation analysis
Abstract We first report a fabrication technique of nanoscale speckle patterns on polymers using broad ion beam milling. The proposed technique is simple and low-cost to produce speckles ranging from dozens of nanometers to less than three...
2016 / Qinghua Wang, Satoshi Kishimoto, Yoshihisa Tanaka, Kimiyoshi Naito -
A Holistic Product Lifecycle Management Approach to Support Design by Machine Data
Abstract This paper is based on an experimental environment with various systems (CAD, CAM, ERP, PDM, MES, TMS) and a coupled milling machine. Based on a holistic view of the process chain and a methodical approach it is possible to ensure a smart...
2016 / K. Haas, H. Schuck, T. Mücke, J. Ovtcharova -
Utilization of Micro Fibrous Carbon Matrix from Tannery Solid Waste for Making Pavement Materials
Abstract Tannery buffing dust (TBD) contains high amount of potential chemicals including Cr (III) besides carcinogenic organic compounds. The Cr (III) present in TBD can be thermodynamically feasible to convert into carcinogenic Cr (VI). The...
2016 / K. Patchai Murugan, S. Swarnalatha, G. Sekaran -
Determination of the Breaking Load for Concrete Slabs Based on the Deformation Theory of Plasticity
Abstract The paper proposes a technique of determining the maximum critical load for concrete slabs based on the deformation theory of plasticity by G.A. Geniev. To solve the problem the method of successive loading is used. Physically nonlinear...
2016 / A.S. Chepurnenko, A.V. Saibel, B.M. Yazyev -
High hardness in the biocompatible intermetallic compound -Ti3Au2016 / E. Svanidze, T. Besara, M. F. Ozaydin, C. S. Tiwary, J. K. Wang, et al.
-
Mechanical properties and failure behavior of unidirectional porous ceramics2016 / Jordi Seuba, Sylvain Deville, Christian Guizard, Adam J. Stevenson
-
Determination of the Optimal Configuration of Energy Recovery Ventilator through Virtual Prototyping and DoE Techniques
Abstract This study presents an approach based on Design of Experiment (DoE) technique for the optimization of an energy recovery ventilator (ERV). This system is one of the efficient ways to enhance the thermo-hygrometric comfort without increase...
2016 / Vincenzo Castorani, Daniele Landi, Michele Germani -
Strain-relief by single dislocation loops in calcite crystals grown on self-assembled monolayers2016 / Johannes Ihli, Jesse N. Clark, Alexander S. Côté, Yi-Yeoun Kim, Anna S. Schenk, et al.
-
Comparison of FE and FLS Model for Surface Water Quality Assessment
Abstract Fresh water scarcity ranks among the most urgent environmental challenges in this century, its quality increasingly being threatened by man, necessitating continuous monitoring of this valued resource. The present study focuses on the...
2016 / Meera G. Mohan, P.G. Jairaj -
A Framework for Automatically Realizing Assembly Sequence Changes in a Virtual Manufacturing Environment
Abstract Global market pressures and the rapid evolution of technologies and materials force manufacturers to constantly design, develop and produce new and varied products to maintain a competitive edge. Although virtual design and engineering...
2016 / Mussawar Ahmad, Bilal Ahmad, Robert Harrison, Bugra Alkan, Daniel Vera, et al. -
Variable amplitude fatigue tests at high frequency hammer peened welded ultra high strength steel S1100
Abstract Post weld treatment methods such as high frequency hammer peening (HFHP) increase the fatigue strength of welded details mainly due to modifying the residual stress state and extending the period of crack initiation. Recently performed...
2016 / Joern Berg, Natalie Stranghoener, Andreas Kern, Marion Hoevel -
Background to the Science and Policy Report for Tensile Membrane Structures
Abstract Nowadays, comprehensive design standards for tensile membrane structures exist neither on European level nor in most European countries on national levels. Currently, the development of a European design standard for membrane structures...
2016 / Natalie Stranghöner, Jörg Uhlemann, Marijke Mollaert -
Wind Energy Resource Assessment in Ngaoundere Locality
Abstract In order to secure future energy and protect the environment, it is important to consider the possibilities of wind as a resource for electrical energy supply. To carry out this study in Cameroon, we chose the locality of Ngaoundere, in...
2016 / Myrin Y. Kazet, Ruben Mouangue, Alexis Kuitche, J.M. Ndjaka -
Tribological Properties of Water-lubricated Rubber Materials after Modification by MoS2 Nanoparticles2016 / Conglin Dong, Chengqing Yuan, Lei Wang, Wei Liu, Xiuqin Bai, et al.
-
Laser Welding of Ultrahigh Strength Steels at Subzero Temperatures
Abstract Ultrahigh strength steels like press hardened 22MnB5 and S1100QL make good construction materials, however when fusion welded they bring the disadvantage of softening in heat affected zones (HAZ). State of the art research of Laser welding...
2016 / Benjamin Gerhards, Uwe Reisgen, Simon Olschok -
Design of Impervious Coatings with Enhanced Reliability Made from Innovative Materials
Abstract This article considers development and research issues of creating impervious screens with enhanced reliability for irrigation canals, ponds and reservoirs using geo-composite materials (geomembranes, bentonite mats and other). In this...
2016 / Y.M. Kosichenko, O.A. Baev -
Editorial of the ICMFM Conference2016 / Inés Fernández Pariente, Javier Belzunce, Alfonso Fernández Canteli, José A.F.O. Correia, Abílio M.P. De Jesus
-
Investigations on the Formation of Stacking Fault-like PID-shunts
Abstract Potential-induced degradation of the shunting type (PID-s) of silicon solar cells is attributed to planar defects at the cell front surface. Stacking fault crystal defects with a length of few micrometers penetrating the p-n junction cause...
2016 / Volker Naumann, Carlo Brzuska, Martina Werner, Stephan Großer, Christian Hagendorf -
Biocompatibility and Bioactivity of Load-Bearing Metallic Implants2011 / A. Zieliński, S. Sobieszczyk, T. Seramak, W. Serbiński, B. Świeczko-Żurek, et al.