Materials engineering topic list of research papers
-
The Flameretardant Study of PVA Using for Corrugated Cardboard
Abstract Corrugated cardboards have truss structure, so these have advantageous in terms of specific strength, workability, price and recycling efficiency. For these properties, corrugated cardboards are used as packing materials. In this research...
2016 / Yoshihiro Mizutani, Yusako Mochizuki, Masayuki Okoshi, Hiroyuki Hamada -
Smart three-dimensional lightweight structure triggered from a thin composite sheet via 3D printing technique2016 / Quan Zhang, Kai Zhang, Gengkai Hu
-
Instrumentation Techniques for Studying the Horizontal1 Behavior of High-Speed Railways
Abstract Aim In recent years the Spanish Geotechnical Laboratory of CEDEX (Centro de Estudios y Experimentación de Obras Públicas) has developed for ADIF (Administrador de Infraestructuras Ferroviarias) a series of monitoring...
2016 / Javier Moreno-Robles, Inés Crespo-Chacón, Jose Luis García-de-la-Oliva -
A Timing Decision-making Method for Product and its key Components in Proactive Remanufacturing
Abstract Generally, the economic profits in product using are considered as the main factor in decision-making in remanufacturing. Since used key components are identified as the core in remanufacturing, each component and its own condition should...
2016 / Qingdi Ke, Hui Wang, Shouxu Song, BingBing Li -
Development of Basic Conditions for Division of Mechanisms into Subfamilies
Abstract This study provides the basics for structural organization and classification of mechanisms within their subfamilies. The division of all mechanisms into subfamilies is based on the application of various types of kinematic pairs with...
2016 / L. Dvornikov, A. Fomin -
Effect of desulphurised waste on long-term porosity and pore structure of blended cement pastes
Abstract This paper presents some results on the porosity and pore size distribution of cement paste containing simulated desulphurised waste (SDW) cured for 90 d. The SDW was chosen for the investigation due to the variability in chemical...
2016 / Jamal M. Khatib, Lee Wright, Pal S. Mangat -
Area Efficient VLSI Architecture for Square Root Carry Select Adder Using Zero Finding Logic
Abstract Binary addition is one of the primitive operations in computer arithmetic. High performance VLSI integer adders are critical elements in general purpose and digital-signal processing processors since they are employed in the design of...
2016 / Bala Sindhuri Kandula, K. Padma Vasavi, I. Santi Prabha -
PSS Design Considering Feedback from the Entire Product-service Lifecycle and Social Media
Abstract In the globally competitive market landscape, companies, in order to remain sustainable, must shift their focus towards constantly improving their PSS offerings by incorporating lean thinking approaches. PSS are complex, dynamic, and...
2016 / Dimitris Mourtzis, Sophia Fotia, Marta Gamito, Rui Neves-Silva, Ana Correia, et al. -
Dilute condition corrosion behavior of glass-ceramic waste form
Abstract Borosilicate glass-ceramics are being developed to immobilize high-level waste generated by aqueous reprocessing into a stable waste form. The corrosion behavior of this multiphase waste form is expected to be complicated by multiple phases ...
2016 / Jarrod V. Crum, James J. Neeway, Brian J. Riley, Zihua Zhu, Matthew J. Olszta, et al. -
Improving Product-Service Systems by Exploiting Information From The Usage Phase. A Case Study
Abstract Nowadays the relevance of Product-Service-Systems (PSS) is increasing. Providing customers with products and supporting services suiting the customer expectations becomes a key-factor for being successful in the market. Contemporarily, a...
2016 / Johannes Lützenberger, Patrick Klein, Karl Hribernik, Klaus-Dieter Thoben -
Theoretical Analysis of the Influence of Longitudinal Stress Changes on Band Dimensions During Continuous Rolling Process2016 / P. Sygut, D. Klimecka–Tatar, S. Borkowski
-
Product-service System for Sustainable EAF Transformers: Real Operation Conditions and Maintenance Impacts on the Life-cycle Cost
Abstract Steel industry is one of the largest energy consumers in the manufacturing sector and covers a great share of the total energy consumptions in the world. As in recent years, energy efficiency has been a top priority for the European...
2016 / B. Marchi, S. Zanoni, L. Mazzoldi, R. Reboldi -
Bifacial Photovoltaic Modules: Measurement Challenges
Abstract The photovoltaic market is currently competing for high efficiency cell technologies. Several of these technologies are inherently bifacial. For large commercial systems, the expected annual bifacial gain is significant, from 5 to over 15%...
2016 / Guillaume Razongles, Lionel Sicot, Maryline Joanny, Eric Gerritsen, Paul Lefillastre, et al. -
Simulation of Flood Control Water Reservoir in Conditions of Torrential Rains on the Catchment
Abstract Every water reservoir must be ready to the control of catastrophic flood. The most dangerous situations can be on the catchments where torrential rains can have significant duration and intensity. Lead time of runoff forecast for dangerous...
2016 / V.V. Belchikhina, V.V. Ilinich, I.F. Asaulyak, A.I. Belolubtsev -
Roll-pitch-yaw autopilot design for nonlinear time-varying missile using partial state observer based global fast terminal sliding mode control
Abstract The acceleration autopilot design for skid-to-turn (STT) missile faces a great challenge owing to coupling effect among planes, variation of missile velocity and its parameters, inexistence of a complete state vector, and nonlinear...
2016 / Ahmed Awad, Haoping Wang -
Stacked Textile Antenna for Multi Band Application Using Foam Substrate
Abstract The proposed article describes the new stacked design of the textile antenna. In this article a tripple wideband high directivity stacked textile antenna is proposed. The proposed antenna shows wideband performance with wide bandwidth of...
2016 / Neha Gupta, Vinod Kumar Singh, Zakir Ali, J. Ahirwar -
Effect of Material Damage on Parameters of a Torsional Wave Propagated in a Deformed Rotor
Abstract The proposed approach allows formulation formulating a self-consistent problem that includes an equation, describing rotor dynamics, and an equation, describing the damage to the material of the rotor. It is shown that the damage to the...
2016 / A.B. Dar’enkov, A.S. Plekhov, V.I. Erofeev -
Beyond Static Analysis: Investigation of Membrane Structure Performance Using Time Stepping, Transient and Progressive Analyses
Abstract Due to recent improvements in commercially available programming and modelling tools, the role of the tension structures engineer is increasingly being expanded beyond the traditional disciplines of form finding, static load analysis and...
2016 / Adam Bown, Tom Makin, David Wakefield -
Axisymmetric Thermo-elastic Deformation of the Cylinder with Two-dimensional Inhomogeneity of Material
Abstract The article discusses the use of a numerical method the calculation of finite cylinders into account the dependence of physical and mechanical properties of the material on temperature. If we have two-dimensional temperature field...
2016 / Vladimir I. Andreev -
Research on the Classification of Commercial Banks’ Fund Clients Based on Learning with Label Proportions
Abstract Due to the problem of privacy protection and other issues in reality, we cannot get the specific label of commercial banks’ fund client, which indicates whether each individual is an important client or not, but merely knows the proportion...
2016 / Fuhai Ma, Yong Shi, Bo Wang, Zhensong Chen