Materials engineering topic list of research papers
-
Three-dimensional Finite Elements Method simulation of Total Ionizing Dose in 22nm bulk nFinFETs
Abstract Finite Elements Method simulation of Total Ionizing Dose effects on 22nm bulk Fin Field Effect Transistor (FinFET) devices using the commercial software Synopsys Sentaurus TCAD is presented. The simulation parameters are extracted by...
2016 / Eleni Chatzikyriakou, Kenneth Potter, William Redman-White, C.H. De Groot -
Design and analysis of high sensitivity photosensor using Cylindrical Surrounding Gate MOSFET for low power applications
Abstract In this paper, a high sensitivity photosensor is proposed that utilizes the Zinc Oxide (metallic ZnO) which act as a transparent optical window over channel. High sensitivity is achieved by using Cylindrical Surrounding Gate Metal Oxide...
2016 / Aakash Jain, Sanjeev Kumar Sharma, Balwinder Raj -
Addition on the Basis of Mix of the Synthesized Hydrosilicates of Calcium and Aluminosilikates for Dry Building Mixtures
Abstract The information about the rheological properties of the dry lime mortar intended for the restoration and decoration of buildings and structures. It is proposed to adjust the properties of the mixture and coatings based on it, the additive,...
2016 / V.I. Loganina, S.N. Kislitsyna, M.V. Frolov -
The Design of Innovative CIP Machine for Heat Exchangers
Abstract The heat exchanger is part of a device which is designed to effectively transfer heat from one environment to another. Exchangers are widely used in heating, cooling, air conditioning, power stations, chemical factories, petrochemical...
2016 / Juliana Litecka -
Using E-mobility as an Enabler for a Fast and Lean Product Development to Optimize the Return of Engineering with the Example of Lithium-ion Battery
Abstract As innovation cycles for new technology products accelerate, markets also demand more complex products with a highly individualized design. Particularly, electric cars represent this case and complexity is not only driven by product...
2016 / Achim Kampker, Christoph Deutskens, Heiner Heimes, Mathias Ordung, Andreas Haunreiter -
Laser Processing of Carbon Fiber Reinforced Plastics – Release of Carbon Fiber Segments During Short-pulsed Laser Processing of CFRP
Abstract Cutting and ablation using short-pulsed laser radiation are promising technologies to produce or repair CFRP components with outstanding mechanical properties e.g. for automotive and aircraft industry. Using sophisticated laser processing...
2016 / Juergen Walter, Alexander Brodesser, Michael Hustedt, Sven Bluemel, Peter Jaeschke, et al. -
Effective Surface Recombination of p+ Layers Doped Using Ion Implantation or Surface Deposited B Sources
Abstract Two key factors need to be fulfilled in order to enable high efficiency bifacial p-type PERT cell. High bulk lifetime values retention during production processes, and minimized effective surface recombination, Seff in the p+ layer. The...
2016 / Ygal Eisenberg, Lev Kreinin, Ninel Bordin, Naftali Eisenberg -
Energy Transfer and Associated Forces in Fluid-structure Interactions
Abstract The present numerical study aims to reveal two forcing mechanisms in fluid-structure interactions, and their influence on energy transfer from fluid to the structure. The governing equations are solved in the non-inertial frame, by the...
2016 / S. Peter, A.K. De -
Determination of dissipated Energy in Fatigue Crack Propagation Experiments with Lock-In Thermography and Heat Flow Measurements
Abstract Lock-in thermography and heat flow measurements with a new developed peltier sensor have been performed during fatigue crack propagation experiments. Lock-in thermography allows space-resolved measurements. Moreover elastic stress fields...
2016 / Jürgen Bär -
Super-elastic and fatigue resistant carbon material with lamellar multi-arch microstructure2016 / Huai-Ling Gao, Yin-Bo Zhu, Li-Bo Mao, Feng-Chao Wang, Xi-Sheng Luo, et al.
-
Analysis on the Ramp Reset Operation by Measuring the Surface Charge Distribution in an ac PDP Cell
Abstract We measured the spatiotemporal surface charge distribution in a co-planar type alternating current plasma display panel driven by the ramp type reset waveform. The longitudinal electro optic modulation technique with BSO single crystal was...
2016 / Dong Cheol Jeong -
Adaptive protection coordination scheme for distribution network with distributed generation using ABC
Abstract This paper presents an adaptive protection coordination scheme for optimal coordination of DOCRs in interconnected power networks with the impact of DG, the used coordination technique is the Artificial Bee Colony (ABC). The scheme adapts...
2016 / A.M. Ibrahim, W. El-Khattam, M. ElMesallamy, H.A. Talaat -
Increase of the Coefficient of Static Friction Using Turn-milling with an Inclined Milling Spindle
Abstract There is a strong need for surfaces with a high coefficient of static friction to meet the demands for increasing performance and lightweight construction strategies, especially regarding friction-locked connections. An auspicious...
2016 / R. Funke, A. Schubert -
Computational Investigation of Synchronized Multibeam Strategies for the Selective Laser Melting Process
Abstract The selective laser melting process features a nearly incomparable freedom of design. But its potential is still limited due to remaining porosity, cracking, distortion, low build-up rates and a limited range of materials. While there is...
2016 / Thorsten Heeling, Konrad Wegener -
Effect of Laser Cladding Parameters on the Microstructure and Properties of High Chromium Hardfacing Alloys
Abstract Mechanical components operating under high-stress and high-temperature environments require enhanced mechanical and tribological properties. In this research, different high chromium steels (Fe-Cr-C-Ni-Mo-Mn) have been coated over a 316L...
2016 / E. Abouda, M. Dal, P. Aubry, T.N. Tarfa, I. Demirci, et al. -
Automatic and Systematic Sentinel-1 SBAS-DInSAR Processing Chain for Deformation Time-series Generation
Abstract Sentinel-1 is the first of a family of satellites designed to provide a data stream for the European environmental monitoring program known as Copernicus. Sentinel-1 constellation has been specifically designed to perform, over land,...
2016 / C. De Luca, M. Bonano, F. Casu, A. Fusco, R. Lanari, et al. -
Welding of Thermomechanically Rolled Fine-Grain Steel by Different Types of Lasers/ Spawanie Stali Drobnoziarnistej Walcowanej Termomechanicznie Laserami Różnego Typu2015 / A. Lisiecki
-
On the Metrology Assurance of Manufacturing of Large-Size Rotating Parts
Abstract The aim of this paper is to discuss the metrological assurance of production of important large-sized shafts in the process of their manufacture as well as the process itself. The paper describes the measurement system developed by the...
2016 / H. Radev, V. Vassilev, V. Bogev, A. Voloshyn -
Oxidation Behavior of Al2O3 Coating on Ti-25Al-12.5Nb Alloy2016 / J. Małecka
-
Experimental and Numerical Analysis of Residual Stress Change Caused by Thermal Loads During Grinding
Abstract A realistic modelling and simulation of the resulting surface integrity e.g residual stresses caused by grinding is limited due to the lack of knowledge to estimate the amount of thermal load affecting the workpiece. This paper deals with...
2016 / Sven Kuschel, Benjamin Kolkwitz, Jens Sölter, Ekkard Brinksmeier, Carsten Heinzel