Materials engineering topic list of research papers
-
The Mathematical Model Research on MIG Groove Welding Process
Abstract Through analysis the MIG groove welding process and the welding experimental result, a complete two-dimensional mathematical model of weld section molten pool characteristics was established. Use Gaussian heat source distribution to...
2016 / Peng Jingnan, Yang Lixin -
The Study of the Electrical Steel and Amorphous Ferromagnets Magnetic Properties
Abstract Materials with special magnetic characteristics are applied in various fields of industry. For instance, magnetic materials having the rectangular hysteresis loop are used in logics and computer science elements. In recent years, owing to...
2016 / A.S. Tatevosyan, A.A. Tatevosyan, N.V. Zaharova -
Experimental Investigations Into EDM Behaviours of En41b Using Copper and Brass Rotary Tubular Electrode
Abstract In the present study, the performance parameters of EDM process are to be evaluated to achieve the feasibility in machining of nitride steel En41b which is extensively used in applications that required excellent resistance to wear and...
2016 / Nivin Vincent, Arun B. Kumar -
Synthesis and Characterization of Nitrile-functionalized Azepanium Ionic Liquids for the Dissolution of Cellulose
Abstract The solubility of cellulose in common solvents are very low. In order to overcome this problem, synthesis of nitrile-functionalized azepanium ionic liquids such as 1-butyl-1-(2-cyano-ethyl)-azepanium bromide,...
2016 / Kallidanthiyil Chellappan Lethesh, Cecilia Devi Wilfred, Syed Nasir Shah, Yoshimitsu Uemura, M.I. Abdul Mutalib -
Dynamic Behavior of Engineered Lattice Materials2016 / J. A. Hawreliak, J. Lind, B. Maddox, M. Barham, M. Messner, et al.
-
Solubilities of CO2, CH4, H2, CO and N2 in choline chloride/urea
Abstract Solubilities of CO2, CH4, H2, CO and N2 in choline chloride/urea (ChCl/Urea) were investigated at temperatures ranging from 308.2 to 328.2 K and pressures ranging from 0.6 to 4.6 MPa. The results show that the solubilities of gases increase ...
2016 / Yujiao Xie, Haifeng Dong, Suojiang Zhang, Xiaohua Lu, Xiaoyan Ji -
Low Temperature Thermal Treatments for n-type Emitters on Si Solar Cells
Abstract Here we report on the impact of annealing and oxidation processes for silicon solar cells performed at low temperatures, in terms of how recombination properties at the surface and within the emitter are modified. Results from this...
2016 / Hongzhao Li, Malcolm Abbott, Brett Hallam, Stuart Wenham -
Reporting Effective Lifetimes at Solar Cell Relevant Injection Densities
Abstract Precise quantitative assessment of c-Si wafer quality is of crucial importance for the development and manufacturing of high efficiency solar cells. For this purpose, lifetime samples are typically fabricated with very well cleaned and...
2016 / Matthias Müller -
Staggered/Collocated POD-ROM for Unsteady Navier-Stokes Flow
Abstract Reduced-order model by proper orthogonal decomposition of Navier-Stokes equation can be established in different manners. After careful screening under different sampling intervals and different numbers of basis vectors, it has been found...
2016 / Yi Wang, Tingyu Li -
The Effect of Mechanical Activation of Lime Putty on Properties of the Autoclaved Calcium Hydrosilicate Materials
Abstract The lime putty is a non-Newtonian fluid that can be either thixotropic or rheopectic depending on burning process of the lime, the presence of the quartz sand and other parameters. One of the most important lime putty characteristics is its ...
2016 / Dana Kubátová, Martin Boháč, Radovan Nečas -
Manufacturing System Design for Business Value, a Holistic Design Approach
Abstract When designing and developing manufacturing systems, many aspects need to be considered. Typically, the manufacturing design objectives are specified to achieve certain operational requirements around quality, capacity, cost etc. They are...
2016 / Anders Johansson, Linn Gustavsson Christiernin, Lars Pejryd -
Investigating plastic deformation around a reheat-crack in a 316H austenitic stainless steel weldment by misorientation mapping
Abstract Creep degradation in austenitic stainless steels is associated with nucleation and growth of cavities that can link up to form micro- and macro- cracks, usually along grain boundaries. A reheat crack found near a header nozzle weld removed...
2016 / Rahul Unnikrishnan, Shirley M. Northover, Hedieh Jazaeri, P. John Bouchard -
Application of instrumented nanoindentation in preformulation studies of pharmaceutical active ingredients and excipients2016 / Mateja Egart, Biljana Janković, Stane Srčič
-
Construction and Accuracy Test of a 3D Model of Non-Metric Camera Images Using Agisoft PhotoScan
Abstract This paper aims to provide a method of constructing and testing the accuracy of a three dimensional (3D) model for non-metric camera images using Agisoft PhotoScan to solve the problems regarding large investment, long processing periods...
2016 / Xiu quan Li, Zhu an Chen, Li ting Zhang, Dan Jia -
Self-compacting Concrete, Protecting Steel Reinforcement under Cyclic Load: Evaluation of Fatigue Crack Behavior
Abstract The unique properties of self-compacting concrete of high workability without loss of stability and improved durability allow better protection of steel reinforcement in concrete structures. Recently, fatigue behavior has become more...
2016 / Thomas Thienpont, Wouter De Corte, Stanislav Seitl -
Thermoprocessing and wire drawing behaviour of ultra high strength steel wires
Summary The thermo-processing of piano wire rods is carried out in the lead bath. This experimentation is carried out under industrial conditions. The investigation is done to examine the effect of austenitic time, lead bath time and wire diameter...
2016 / S.S. Bargujer, Parvinder Singh, Vikas Raizada -
Woven fabric composites: Can we peel it?
Abstract The present work focuses on the applicability of the mandrel peel test to quantify the fracture toughness of woven fabric Carbon/PEEK composites. For this purpose, the mandrel peel test was compared to the standardized DCB test. Unstable...
2016 / F. Sacchetti, W.J.B. Grouve, L.L. Warnet, I. Fernandez Villegas -
Influence of Adapted Wavelengths on Temperature Fields and Melt Pool Geometry in Laser Transmission Welding
Abstract Laser transmission welding is an established joining technology for the creation of strong, hermetic and aesthetic weld seams between thermoplastic parts. However, weld seam properties are strongly dependent on the optical properties of the ...
2016 / A. Schkutow, T. Frick -
Failure Classification and Analysis for Technical Products
Abstract The paper presents an approach to implement a failure classification and associated analyses for production ramp-up. The structural design of the failure classification is described in terms of a faceted classification by design principles...
2016 / Malte Schröder, Björn Falk, Robert Schmitt -
High-performance multi-functional reverse osmosis membranes obtained by carbon nanotube·polyamide nanocomposite2015 / Shigeki Inukai, Rodolfo Cruz-Silva, Josue Ortiz-Medina, Aaron Morelos-Gomez, Kenji Takeuchi, et al.