Materials engineering topic list of research papers
-
Laser Joining of Different Polymer-metal Configurations: Analysis of Mechanical Performance and Failure Mechanisms
Abstract Direct thermal laser joining of plastic and metallic materials is nowadays arising as an alternative technology for the generation of hybrid joints. The focus of this study is on analyzing the mechanical behavior and failure mechanisms of...
2016 / E. Rodríguez-Vidal, C. Sanz, J. Lambarri, J. Renard, V. Gantchenko -
Determination and Dependencies of Melt Pool Dimensions in Laser Micro Welding
Abstract Melt pool dimensions such as width and length influence the properties of the resulting weld joint and should be considered when designing the laser welding process. The melt pool width and as a consequence the weld seam width determine the ...
2016 / Andreas Patschger, Jens Bliedtner -
Security-Constrained Economic Dispatch for Integrated Natural Gas and Electricity Systems
Abstract This paper proposes a security-constrained economic dispatch (ED) model for integrated natural gas and electricity systems. Natural gas system is modeled and its security constraints are integrated into the ED model. The Gas Shift Factor...
2016 / Guoqing Li, Rufeng Zhang, Houhe Chen, Tao Jiang, Hongjie Jia, et al. -
Special Features of Antivibration Mountings, Steel Structures, and Equipment Production
Abstract Results of the research of a stress-deformed state of elements of the stamp to improve tool life in hot stamping of vibration-damping spring ends are described. Some non-theoretical studies using Solid Works software Simulation (SWS), based ...
2016 / E.I. Yatsun, M.S. Razumov, A.N. Grechukhin -
Creep-fatigue crack growth behaviour of P91 steels
Abstract The importance of predicting failure due to combined creep-fatigue crack growth in high temperature power-plant components has become of great importance importance due to the need for plant to ‘load follow’ in response to fluctuations in...
2016 / N. Ab Razak, C.M. Davies, K.M. Nikbin -
Investigation of the Process of Heat Transfer in the Structure of Thermal Insulation Materials Based on Natural Fibres
Abstract Thermal insulation materials based on natural fibres are some of the promising materials that are currently emerging on the construction market. These materials are important especially in terms of sustainable development, since they...
2016 / Jiří Zach, Richard Slávik, Vítězslav Novák -
Investigation of Characteristics of Passive Heat Removal System Based on the Assembled Heat Transfer Tube
Abstract To get an insight into the operating characteristics of the passive residual heat removal system of molten salt reactors, a two-phase natural circulation test facility was constructed. The system consists of a boiling loop absorbing the...
2016 / Xiangcheng Wu, Changqi Yan, Zhaoming Meng, Kailun Chen, Shaochuang Song, et al. -
Quality Assurance and Support Measures for Solar Cooling on System Level
Abstract Within the IEA SHC Task 48 “Quality assurance and support measures for Solar Cooling” the analysis and evaluation of the systems has been one of the four main focuses. Here the activities are including the lab- and field-based...
2016 / Alexander Morgenstern, Roberto Fedrizzi, Tim Selke, Marco Beccali, Daniel Mugnier, et al. -
NoWaste: Waste Heat Re-use for Greener Truck
Abstract The present paper summarizes the key points of the European NoWaste Project, which aims at developing Rankine cycle systems for integration into long-haul trucks with the aim to convert the waste heat of the exhaust gases into useful energy ...
2016 / F. Bettoja, A. Perosino, V. Lemort, L. Guillaume, T. Reiche, et al. -
Flower Pollination Algorithm Based Optimal Setting of TCSC to Minimize the Transmission Line Losses in the Power System
Abstract To avoid the problems of voltage stability, losses and security of power system is needed to monitor frequently and these problems are controlled by using the Flexible AC Transmission System (FACTS) devices. They help to improve the voltage ...
2016 / D. Lalitha Pravallika, B. Venkateswara Rao -
Geometrical Method for Increasing Precision of Machine Building Parts
Abstract Calculation of complex curves with high accuracy is challenging. The curve is approximated by segments of straight lines and carried out smoothing. A new method of analytic geometry to calculate the trajectories of mechatronic systems and...
2016 / Pavol Božek, Aleksander Lozkin, Alexey Gorbushin -
Additive Manufacturing of Sn63Pb37 Component by Micro-coating
Abstract Micro-coating is a novel technology to build near-net component layer by layer, which uses a crucible and nozzle instead of a weld head and wire feeder to supply material compared with shaped metal deposition. A pneumatic system is adopted...
2016 / Guangxi Zhao, Zhengying Wei, Jun Du, Wei Liu, Xin Wang, et al. -
The Spline Method for the Solution of the Transient Heat Conduction Problem with Nonlinear Initial and Boundary Conditions for a Plate
Abstract There are many cases in the engineering practice when it is necessary to know the transient temperature field in a flat plate. At that, temperature distribution is studied experimentally or by calculation. However, the obtained calculation...
2016 / V.M. Kudoyarova, V.P. Pavlov -
Study on the Thermal Stress Distribution of Crystalline Silicon Solar Cells in BIPV
Abstract The working temperature of BIPV modules is high than ground-mounted PV. Based on the theory of material mechanics and thermal stress analysis, the stress distribution of metallization interconnects system for crystalline silicon solar...
2016 / He Wang, Ao Wang, Hong Yang, Jingsheng Huang -
Optimization of Process Parameters for High Efficiency Laser Forming of Advanced High Strength Steels within Metallurgical Constraints
Abstract Laser forming (LF) has been shown to be a viable alternative to form automotive grade advanced high strength steels (AHSS). Due to their high strength, heat sensitivity and low conventional formability show early fractures, larger...
2016 / Ghazal Sheikholeslami, Jonathan Griffiths, Geoff Dearden, Stuart P. Edwardson -
The Evaluation of the Thearmoacoustic Cooler Application for LNG Vapor Recondensation
Abstract The objective of the research is the evaluation of the thermoacoustic cooler application for LNG vapor recondensation. The analytical and calculation study results are presented in the paper, engineering solutions are proposed. The obtained ...
2016 / V.I. Karagusov, I.V. Karagusov -
Investigation of ductile iron casting process parameters using Taguchi approach and response surface methodology2016 / A. Johnson Santhosh, A. R. Lakshmanan
-
Fatigue Life Response of P355NL1 Steel under Uniaxial Loading Using Kohout-Věchet Model
Abstract The fatigue life of materials and structural details can be characterized by distinct fatigue regimes. These regimes may range from quasi-static monotonic loading to very high cyclic fatigue. The Kohout-Věchet (KV) fatigue model describes...
2016 / J.A.F.O. Correia, M. Calvente, S. Blasón, G. Lesiuk, I.M.C. Brás, et al. -
Significance of the double-layer capacitor effect in polar rubbery dielectrics and exceptionally stable low-voltage high transconductance organic transistors2015 / Chao Wang, Wen-Ya Lee, Desheng Kong, Raphael Pfattner, Guillaume Schweicher, et al.
-
Construction of Basic-element Database for Traditional Chinese Culture in Industrial Design
Abstract With the rapid advancement of internet and mobile internet, e-commerce has facilitated international trade and daily shopping. Appealed by the potential large Chinese market, many foreign companies have already got engaged in the...
2016 / Haotian Li, Wei Liu, Xingsen Li