Materials engineering topic list of research papers
-
Robotic Arm with Brain – Computer Interfacing
Abstract Brain Computer Interfaces (BCI), is a modern technology which is currently revolutionizing the field of signal processing. BCI helped in the evolution of a new world where man and computer had never been so close. Advancements in cognitive...
2016 / T.D. Sunny, T. Aparna, P. Neethu, J. Venkateswaran, V. Vishnupriya, et al. -
The influence of tool micro-geometry on stress distribution in turning operations of AISI 4140 by FE analysis2016 / Mathias Agmell, Aylin Ahadi, Oleksandr Gutnichenko, Jan-Eric Ståhl
-
A New PrecoderCodebook Design in Spatially Correlated MIMO Channels
Abstract In this paper, we propose a new method to design precoder codebook for spatially correlated MIMO channels. Our codebook includes a global and a local component. The codewords in the global component are uniformly distributed on the...
2016 / Yin Zhu, Chao Wang, Ping Wang, Fu-qiang Liu -
Verification of Tensegrity Properties of Kono Structure and Blur Building
Abstract Cable-bar structures are commonly used in engineering. Some of them are in special configuration named “tensegrity”. The objective of the present paper is to describe and verify two interesting examples of existing civil engineering...
2016 / Wojciech Gilewski, Joanna Kłosowska, Paulina Obara -
Teaching Nanoscience and Thinking Nano at the Macroscale: Nanocapsules of Wisdom
Abstract One of the challenges for Nanotechnology is education, which is considered as a bottleneck for Nanotechnology development and implementation. This work contributes to nanoscale education by designing a wide variety of cutting-edge...
2016 / Victor Sebastian, Marta Gimenez -
Calculation of the Parameters of Hybrid Shunting Locomotive
Abstract The major part of the locomotives under operation requires increase of the maintenance and repair expenditures by 40-60% in comparison with the modern models. Creating a hybrid shunting locomotive is an effective solution to the shortage of ...
2016 / Anatoliy Falendysh, Pavel Kharlamov, Olga Kletska, Nikita Volodarets -
Time-efficient simulations of tight-binding electronic structures with Intel Xeon PhiTM many-core processors
Abstract Modelling of multi-million atomic semiconductor structures is important as it not only predicts properties of physically realizable novel materials, but can accelerate advanced device designs. This work elaborates a new...
2016 / Hoon Ryu, Yosang Jeong, Ji-Hoon Kang, Kyu Nam Cho -
Exploration of data science techniques to predict fatigue strength of steel from composition and processing parameters2014 / Ankit Agrawal, Parijat D Deshpande, Ahmet Cecen, Gautham P Basavarsu, Alok N Choudhary, et al.
-
About LNG Energy Utilization Efficiency Estimation
Abstract The amount of LNG demand is continuously increasing now. The main disadvantage of the LNG in comparison with traditional NG transportation is a fact that to liquefy LNG it is necessary to spend energy and then add some heat to re-gasify it. ...
2016 / E.V. Blagin, D.A. Uglanov, A.I. Dovgyallo -
2D FE Prediction of Surface Alteration of Inconel 718 under Machining Condition
Abstract Nickel-based super alloys such as Inconel 718 are widely employed in extremely hostile applications owing to their superior thermo-mechanical properties. On the contrary, these latter lead the industries to adopt conservative process...
2016 / Krunal Rana, Sergio Rinaldi, Stano Imbrogno, Giovanna Rotella, Domenico Umbrello, et al. -
Exploring the influence of micro-structure on the mechanical properties and crack bridging mechanisms of fibrous tufts
Abstract A constitutive model for tufts bridging a mode I delamination is presented. The tuft is modelled as a rod, laterally supported by an elastic medium and clamped at both ends. A fracture mechanics approach is introduced to describe the...
2016 / C. Osmiani, G. Mohamed, J.W.G. Treiber, G. Allegri, I.K. Partridge -
Tensile Split Hopkinson Bar Technique: Numerical Analysis of the Problem of Wave Disturbance and Specimen Geometry Selection2016 / Robert Panowicz, Jacek Janiszewski
-
Obtaining Crack-free WC-Co Alloys by Selective Laser Melting
Abstract Standard hardmetals of WC-Co system are brittle and often crack at selective laser melting (SLM). The objective of this study is to estimate the range of WC/Co ratio where cracking can be avoided. Micron-sized Co powder was mixed with WC...
2016 / R.S. Khmyrov, V.A. Safronov, A.V. Gusarov -
Hybrid Additive Manufacturing Technologies – An Analysis Regarding Potentials and Applications
Abstract Imposing the trend of mass customization of lightweight construction in industry, conventional manufacturing processes like forming technology and chipping production are pushed to their limits for economical manufacturing. More flexible...
2016 / Marion Merklein, Daniel Junker, Adam Schaub, Franziska Neubauer -
Explosive Cladding of Titanium and Aluminium Alloys on the Example of Ti6Al4V-AA2519 Joints / Wybuchowe Platerowanie Stopów Tytanu I Aluminium Na Przykładzie Połączenia Ti6Al4V-AA25192016 / A. Gałka, M. Najwer
-
Model-based Predictive Force Control in Milling – System Identification
Abstract Manufacturing complex products, process monitoring and process control systems can increase productivity. Today, improvements in simulation technique enable computer based process set up and optimization reducing expensive trials. The...
2016 / O. Adams, F. Klocke, M. Schwenzer, S. Stemmler, D. Abel -
Points-based Safe Path Planning of Continuum Robots2015 / Khuram Shahzad, Sohail Iqbal, Peter Bloodsworth
-
TiO2 nanosheets synthesized by atomic layer deposition for photocatalysis
Abstract Two-dimensional TiO2 nanosheets were synthesized by atomic layer deposition (ALD) on dissolvable sacrificial polymer layer. The photocatalytic performance of free-standing TiO2 nanosheets prepared with different numbers of ALD cycles (100,...
2016 / Riyanto Edy, Yuting Zhao, Gaoshan S. Huang, Jianjun J. Shi, Jing Zhang, et al. -
Fully Reversed Axial Notch Fatigue Behaviour of Virgin and Recycled Polypropylene Compounds
Abstract In this paper, the fatigue behaviour of different polypropylene compounds, characterized by different fractions of recycled material, were analysed. Fully reversed fatigue tests were carried out on three different polypropylene (PP)...
2016 / G. Meneghetti, M. Ricotta, M. Sanità, D. Refosco -
Weibull Distribution to Describe Grading Evolution of Materials with Crushable Grains
Abstract This work presents a study on the evolution of the Grain Size Distribution (GSD) of an artificial granular material with crushable grains and its relation with the observed mechanical behaviour. The main aim of the work is to find a...
2016 / Giulia Guida, Manuel Bartoli, Francesca Casini, Giulia M.B. Viggiani