Materials engineering topic list of research papers
-
Neurocomputational Models for Parameter Estimation of Circular Microstrip Patch Antennas
Abstract Neurocomputational models eliminates the complex, lengthy and time consuming mathematical procedures for design, analysis and calculating performance parameters of Microstrip antenna. No single ANN based model has been proposed till date...
2016 / Jagtar Singh Sivia, Amar Partap Singh Pharwaha, Tara Singh Kamal -
Scenario Design Approach to Envisioning Sustainable Manufacturing Industries to 2050
Abstract There is an increasing need for the manufacturing industry to achieve environmental sustainability. Scenario design is a promising approach to delineating multiple visions of sustainable manufacturing industries (SMIs). This paper aims to...
2016 / Yusuke Kishita, Yuji Mizuno, Yasushi Umeda -
Micro-structure in the Joint Friction Plane in Friction Welding of Dissimilar Steels
Abstract In the friction welding of dissimilar base metals occurs an uneven heating in the outside and inside zones of materials what causes appearance of various structures in the joint zone. Considering that the objective is achieving of the...
2016 / Nada Ratković, Dušan Arsić, Vukić Lazić, Ružica R. Nikolić, Branislav Hadzima -
On constitutive assumptions in phase field approaches to brittle fracture
Abstract Constitutive assumptions involved in phase field models of fracture in order to capture the behavior of cracks on the (smeared) continuum level are critically reviewed and several improvements are suggested. While some of the deficiencies...
2016 / Michael Strobl, Thomas Seelig -
Macro deformation and micro structure of 3D granular assemblies subjected to rotation of principal stress axes2016 / Xia Li, Dunshun Yang, Hai-Sui Yu
-
Hybrid application to accelerate wind field calculation
Abstract Wind field calculation is a crucial point in predicting forest fire evolution in real emergencies. Such wind field calculation involves complex models that must be solved in a very short time to accomplish the real-time constraints of...
2016 / G. Sanjuan, T. Margalef, A. Cortés -
Lightweight Refractory Concrete Based on Aluminum-Magnesium-Phosphate Binder
Abstract The paper is discussing the results of works on preparation of refractory concrete based on aluminum-magnesia-phosphate binder. The modification of magnesia phosphate binder by aluminum allows increasing the stability of the binder, as well ...
2016 / V.A. Abyzov -
Spanning Tree Based Community Detection Using Min-Max Modularity
Abstract Community refers to the group of entities which have similar behavior or characteristic among them. Usually community represents basic functional unit of social network. By understanding the behavior of elements in a community, one can...
2016 / Ranjan Kumar Behera, S.K. Rath, Monalisa Jena -
Experimental investigation on low-frequency vibration assisted micro-WEDM of Inconel 718
Abstract The micro-wire electric discharge machining (micro-WEDM) has emerged as the popular micromachining processes for fabrication of micro-features. However, the low machining rate and poor surface finish are restricting wide applications of...
2016 / Deepak Rajendra Unune, Harlal Singh Mali -
Modelling of Packing Density for Particle Composites Design
Abstract Effective packing of solid particles is one of the main topics in the field of ceramics, powder metallurgy and concrete technology. In these material sectors it is necessary to maximise or optimise the packing density of particles....
2016 / Ondřej Koutný, Jiří Kratochvíl, Jiří Švec, Jan Bednárek -
Evaluation of self-healing ability of Ce–V conversion coating on AZ31 magnesium alloy
Abstract This study investigated the influence of cerium nitrate in vanadate solutions on the properties of Ce–V conversion coatings on AZ31 magnesium alloys, and evaluated the self-healing behavior of the Ce–V conversion coating for AZ31 magnesium...
2016 / Xiao Jiang, Ruiguang Guo, Shuqin Jiang -
Polymer Nanocomposites Development and Research for Petrochemical and Oil and Gas Production Equipment
Abstract The research and development results of new anti-friction polymer nanocomposites based on polytetrafluoroethylene characterized with an increased wear resistance due to the polymer matrix with complex fillers-modifiers modification are...
2016 / Y.K. Mashkov, V.A. Egorova, O.V. Chemisenko, O.V. Maliy -
Phase-phase Short Fault Analysis of Permanent Magnet Synchronous Motor in Electric Vehicles
Abstract This paper proposes a methodology of phase to phase short-circuits fault diagnosis in permanent magnet synchronous motors (PMSM). The integrated network basis of such a method is composed with a BP network and two Elman networks. The three...
2016 / Zhifu Wang, Jingzhe Yang, Chuang Cao, Zhongli Gu -
Importance of diffuse scattering for materials science2016 / Hiroshi Sawa
-
High Temperature Treatment of Birch Plywood in the Sparse Environment for the Creation of a Waterproof Construction Veneer
Abstract One of the most common wood-laminated materials widely used in the construction industry and in the houses is plywood. Having small thickness, plywood possesses a high strength and is easily installed. However, the exploitation of plywood...
2016 / R.R. Khasanshin, R.R. Safin, E.Y. Razumov -
Surface Finish Machining of Medical Parts Using Plasma Electrolytic Polishing
Abstract Biomanufactured parts, for implant or generally in-vivo use, have high requirements for surface properties. Depending on their field of application, not only smooth, but also well-defined surfaces, i.e. roughness parameters, must be set to...
2016 / Henning Zeidler, Falko Boettger-Hiller, Jan Edelmann, Andreas Schubert -
How Does Building Occupancy Influence Energy Efficiency of HVAC Systems?
Abstract Occupancy (presence and number of occupants) is one of the most important factors impacting energy efficiency of HVAC systems as occupancy determines heating/cooling loads on the demand side by varying conditioning periods and settings....
2016 / Zheng Yang, Burcin Becerik-Gerber -
An Approach to Integrated Modularization
Abstract A modular architecture is a strategic means to deliver external variety (to the customers) and internal commonality (to the manufacturing organization). A common view is that a module should be a physical and functional building block, with ...
2016 / David Williamsson, Ulf Sellgren -
Effects of heat treatment on the properties of bamboo scrimber2016 / Weiwei Shangguan, Yingchun Gong, Rongjun Zhao, Haiqing Ren
-
Kinetic Analysis of Rice Husk Pyrolysis Using Kissinger-Akahira-Sunose (KAS) Method
Abstract The pyrolysis of rice husk is studied using thermogravimetric analysis (TGA) equipment. The present study investigates the thermal degradation behavior and determination of the kinetic parameter such as activation energy, E using...
2016 / Aaron Chee Ren Lim, Bridgid Lai Fui Chin, Zeinab Abbas Jawad, Kiew Ling Hii