Materials engineering topic list of research papers
-
Efficiency of Tool Path Optimization Using Genetic Algorithm in Relation to the Optimization Achieved with the CAM Software
Abstract The production efficiency has an important role for each manufacturing process, especially in the process of drilling a large number of holes, where production depends on the time required for drilling. The tool path optimization during the ...
2016 / Danijela Pezer -
Study of the influence of the oxide and concrete parameters on the results of accelerated corrosion tests
Abstract In this work, a numerical study is presented to analyze the influence of the oxide and concrete parameters on the results of cracking induced by corrosion. The results of two-dimensional models of prisms reinforced with a bar and prisms...
2016 / Beatriz Sanz, Jaime Planas, José M. Sancho -
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Abstract At low homologous temperatures (down to cryogenic temperatures), the CrMnFeCoNi high-entropy alloy possesses good combination of strength, work hardening rate (WHR), ductility, and fracture toughness. To improve understanding of the...
2016 / G. Laplanche, A. Kostka, O.M. Horst, G. Eggeler, E.P. George -
Chip Formation Zone Analysis During the Turning of Austenitic Stainless Steel 316L under MQCL Cooling Condition
Abstract The paper presents the influence of the cutting zone cooling method on selected indices of the chip formation zone and on the chip shape. In the process of turning 316L austenitic steel three cooling methods have been considered: dry...
2016 / R.W. Maruda, G.M. Krolczyk, P. Niesłony, J.B. Krolczyk, S. Legutko -
Experimental investigation on yield behavior of PMMA under combined shear–compression loading
Abstract The work experimentally studies the yielding behavior of polymethyl methacrylate (PMMA) at three different loading rates through a developed combined shear–compression test technique which contains a universal materials testing machine,...
2016 / Jianjun Zhang, Tao Jin, Zhihua Wang, Longmao Zhao -
Experimental Investigation of Dynamic Fracture Behaviors of Polymethyl Methacrylate2016 / Guiyun Gao, Jie Zhou, Zheng Li
-
Imitation Model of Forecasting Surface Relief When Forming it During Cylindrical Grinding
Abstract An imitation geometrical model of grinding wheel and work piece interaction, allowing forecasting roughness at processing stages was worked out, taking into account changing in radial feed in the process of cylindrical cutting-in grinding....
2016 / L.V. Shipulin, A.A. D’yakonov -
Using artificial neural network to predict velocity of sound in liquid water as a function of ambient temperature, electrical and magnetic fields
Abstract One of the main thermophysical properties of liquid water is velocity of sound. However, the effect of different externalities on velocity of sound in liquid water is not well known. Therefore, in current study, by designing an artificial...
2016 / Hashem Nowruzi, Hassan Ghassemi -
Development and Performances Overview of Ammonia-water Absorption Chillers with Cooling Capacities from 5 to 100 kW
Abstract From 2010 to 2015, three similarly design based absorption chillers have been developed, manufactured and characterized on test benches. The chillers are all ammonia-water thermally driven single effect chiller. They are intended to operate ...
2016 / François Boudéhenn, Sylvain Bonnot, Hélène Demasles, Florent Lefrançois, Maxime Perier-Muzet, et al. -
Failure analysis of a diesel generator connecting rod
Abstract This paper presents the results of a failure analysis investigation conducted in a connecting rod from a diesel engine used in the generation of electrical energy. The investigation included an extensive analysis of the con-rod material as...
2016 / C. Juarez, F. Rumiche, A. Rozas, J. Cuisano, P. Lean -
Probabilistic Approach for Analysis of Strength of Ceramics With Different Porous Structure Based on Movable Cellular Automaton Modeling
Abstract Movable cellular automaton method which is a computational method of particle mechanics is applied to simulating uniaxial compression of 3D porous ceramic specimens. Pores were considered explicitly by removing automata selected randomly...
2016 / A. Yu. Smolin, I. Yu. Smolin, I. Yu. Smolina -
Understanding the properties of low-cost iron-containing powder metallurgy titanium alloys
Abstract The high production costs of titanium in comparison to other structural metals is the main limiting factor for the wide employment of titanium. Cost reduction can be addressed considering creative fabrication methods and/or formulating new...
2016 / L. Bolzoni, E.M. Ruiz-Navas, E. Gordo -
Autonomous Filling of Grain-Boundary Cavities during Creep Loading in Fe-Mo Alloys2016 / S. Zhang, H. Fang, M. E. Gramsma, C. Kwakernaak, W. G. Sloof, et al.
-
Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of MgSn alloys
Abstract The evolution of dendritic microstructures during the solidification of a Mg-15 wt%Sn alloy was investigated in situ via fast synchrotron X-ray microtomography. To enable these in situ observations a novel encapsulation method was developed ...
2016 / Sansan Shuai, Enyu Guo, A.B. Phillion, Mark D. Callaghan, Tao Jing, et al. -
Investigations on the Flank Wear and Modelling of the Contact Radius Effect in Turning of Ti6Al4V Titanium Alloy
Abstract Machining of difficult-to-cut materials like Ti6Al4V titanium alloy leads to significant flank wear on the cutting tool. In order to ensure the respect of final part specifications, flank wear has to be controlled. In literature, predictive ...
2016 / Aurélie Bono, Théo Dorlin, Jean-Philippe Costes, Guillaume Fromentin, Habib Karaouni -
Study of the Effect of Material Machinability on Quality of Surface Created by Abrasive Water Jet
Abstract The paper investigates the effect of material machinability on the quality of cutting surfaces created by abrasive waterjet in selected aluminium alloys. The texture of studied surfaces was measured by an optical profilometer and...
2016 / Dagmar Klichova, Jiri Klich -
Advanced Ship Systems Condition Monitoring for Enhanced Inspection, Maintenance and Decision Making in Ship Operations
Abstract Structural and machinery failures in the day-to-day ship operations may lead to major accidents, endangering crew and passengers onboard, posing a threat to the environment, damaging the ship itself and having a great impact in terms of...
2016 / Iraklis Lazakis, Konstantinos Dikis, Anna Lito Michala, Gerasimos Theotokatos -
Numerical Simulation for Dehydration of Natural Gas using Joule Thompson Cooling Effect
Abstract In this study, the potential of Joule Thompson cooling effect for natural gas dehydration was studied using numerical simulation method. Population balance model (PBM) was used to simulate the non-equilibrium water condensation process....
2016 / Wee Horng Tay, Kok Keong Lau, Azmi Mohd Shariff -
Graphical Analysis of a DC-DC Converter Effect on a Fuel Cell: D-transformation
Abstract In practical cases, the use of a renewable energy device with a DC-DC converter is preferred to a single device alone for the purpose of compensating unstable output power and intrinsic limitations of the device. However there has not been...
2016 / Sang C. Lee, Woo Young Jung -
Growth of free-standing bulk wurtzite AlxGa1−xN layers by molecular beam epitaxy using a highly efficient RF plasma source
Abstract The recent development of group III nitrides allows researchers world-wide to consider AlGaN based light emitting diodes as a possible new alternative deep ultra–violet light source for surface decontamination and water purification. In...
2016 / S.V. Novikov, C.R. Staddon, S.-L. Sahonta, R.A. Oliver, C.J. Humphreys, et al.