Materials engineering topic list of research papers
-
Effect of oxidation and surface roughness on the shear strength of single-lap-joint adhesively bonded metal specimens by tension loading2016 / M. H. Khan, O. A. Gali, A. Edrisy, A. R. Riahi
-
Automated Irrigation by an ANN Controller
This article has been retracted: please see Elsevier Policy on Article Withdrawal (http://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the editor. Mr.Faruk Bin Poyen has...
2015 / Faruk Bin Poyen, Soumya Roy, Apurba Ghosh, Rajib Bandyopadhyay -
A correlation between ionization energies and critical temperatures in superconducting A3C60 fullerides
Abstract Buckminster A3C60 fullerides (A=alkali metal) are usually superconductors with critical temperatures T c in the range 2.5–40K. Although they are very similar in size, structure and many other aspects, the effect of the...
2015 / Florian Hetfleisch, Marco Stepper, Hans-Peter Roeser, Artur Bohr, Juan Santiago Lopez, et al. -
Machining Process Simulations with Smoothed Particle Hydrodynamics
Abstract Because of its meshless nature, the Smoothed Particle Hydrodynamics (SPH) method is a promising alternative to well-established mesh-based simulation techniques like the Finite Element Method when investigating setups that are characterized ...
2015 / Fabian Spreng, Peter Eberhard -
Characterization of Welded Joints (MIG and SAW) on LDX 2101 Duplex SS
Abstract LDX 2101 (21,5%Cr, 5%Mn, 1,5%Ni and 0,3%Mo) duplex stainless steel 255x123mm sheets, 10mm thick, have been welded by using either MIG (Metal Inert Gas) or SAW (Submerged Arc Welding) processes with appropriate filler material. It has been...
2015 / Ubertalli Graziano, Donato Firrao, Gianmarco Taveri -
Nonlinear Mode Interactions in the Wake of a Medium Height Roughness Element
Abstract The present study is devoted to nonlinear (resonant) mode interactions in the wake of a medium height, cylindrical roughness element, which is placed in a laminar, airfoil boundary layer. The roughness element causes a considerable mean...
2015 / Benjamin Plogmann, Werner Würz, Ewald Krämer -
Comparison of Mechanical Properties and Resistance to Creep of 20MnCr5 Steel and X10CrAlSi25 Steel
Abstract A comparison of both mechanical properties at different temperatures and resistance to creep related to steels 20MnCr5 and X10CrAlSi25 were investigated. In this sense, engineering stress-strain diagrams and creep curves are presented....
2015 / Josip Brnic, Marino Brcic -
Structure of elastically strain-sharing silicon(110) nanomembranes2007 / A C Opotowsky, S A Scott, C S Ritz, D E Savage, G K Celler, et al.
-
Influence of Combined Process “Rolling-pressing” on Microstructure and Mechanical Properties of Copper
Abstract The aim of this work is to study the influences of the combined process of “rolling-pressing” on the microstructure and mechanical properties of copper billets. Laboratory studies were performed of the combined process. In particular, a...
2014 / Lezhnev Sergey, Naizabekov Abdrakhman, Panin Evgeniy, Volokitina Irina -
Hydrogen embrittlement behavior of Ni-Ti shape memory alloy with different microstructures in acidic fluoride solution2015 / Toshio Ogawa, Eishu Yokozawa, Tetsuro Oda, Kuniaki Maruoka, Jun’ichi Sakai
-
A derivation of the generalized model of strains during bending of metal tubes at bending machines2014 / Z. Śloderbach
-
Modeling and Simulation of Photovoltaic Module and Array Based on One and Two Diode Model Using Matlab/Simulink
Abstract This paper presents the modeling and simulation of photovoltaic module and array based on one and two diode model using the software Matlab/Simulink. Also, two fast and accurate methods are used to obtain the parameters of photovoltaic...
2015 / Ahmed Bouraiou, Messaoud Hamouda, Abdelkader Chaker, Mohammed Sadok, Mohammed Mostefaoui, et al. -
The Effect of Water-Based Nanofluid Incorporating Al2O3 Nanoparticles on Heat Pipe Performance
Abstract This study is considering the impact of nanoparticles deposition on the heat pipe (HP) wick porosity after several use of nanofluid as a working medium. Water based nanofluids with 1, 2 and 3 vol% alumina nanoparticles are prepared and...
2015 / Mohamed I. Hassan, Ismail A. Alzarooni, Youssef Shatilla -
A Case Study on Preservice Science Teachers’ Laboratory Usage Self Efficacy and Scientific Process Skills
Abstract Laboratory usage self efficacy and scientific process skills are effective variables for science teachers’ professional careers. Therefore, teacher education systems need to have activities to promote preservice teachers’ development of...
2015 / Seda Usta Gezer -
Statistics of dynamic fragmentation for a necking instability
Abstract The fragmentation of a stretching rod in ductile material is investigated with the approach of Mott applied to a set of necking points. Namely, instead of randomly distributed point defects, the potential sites of fracture are the maxima of ...
2015 / J.L. Dequiedt -
Fabrication, bioactivity, in vitro cytotoxicity and cell viability of cryo-treated nanohydroxyapatite–gelatin–polyvinyl alcohol macroporous scaffold
Abstract Freeze casting and cryogenic treatment both low temperature process have been employed to fabricate nanobiocomposite hydroxyapatite (HA)–gelatin–polyvinyl alcohol (PVA) macroporous scaffolds from synthesized three different spherical, rod...
2014 / Sanjaya Kumar Swain, Debasish Sarkar -
Hysteresis Characteristics of Shear Panel Damper Using SLY120
Abstract Shear panel dampers (SPD) are a type hysteresis damper used in structures to absorb seismic energy whereby damages to the major structural components could be minimized. It dissipates seismic energy by metallic deformation of the panel,...
2014 / Jaehyouk Choi, Daniel Y. Abebe -
Validation of Usability Driven Web based Software Process Model using Simulation
Abstract In this paper we have presented validation of proposed usability driven web based software process model (UdWbM) through simulation. We have used Software Engineering gaming tool SimSE for making simulation of a system (taken as case study) ...
2015 / Hina Gull, Saleh Alrashed, Sardar Zafar Iqbal -
Preparation of hydroxide ion conductive KOH–layered double hydroxide electrolytes for an all-solid-state iron–air secondary battery
Abstract Anion conductive solid electrolytes based on Mg–Al layered double hydroxide (LDH) were prepared for application in an all-solid-state Fe–air battery. The ionic conductivity and the conducting ion species were evaluated from impedance and...
2014 / Taku Tsuneishi, Hisatoshi Sakamoto, Kazushi Hayashi, Go Kawamura, Hiroyuki Muto, et al. -
An Overview of Dynamics Modeling of Inflatable Solar Array
Abstract The inflatable solar array (ISA) is a new kind of solar array. It has many advantages over the traditional ones, because it can be packaged into small volumes during launch, then sent into a pre-selected orbit, and finally deployed by its...
2012 / Delin Cui, Shaoze Yan, Xiaosong Guo, Fulei Chu