Materials engineering topic list of research papers
-
Evaluation of Factors Affecting Cyclic Softening Behaviors of Mod. 9Cr-1Mo Steel
Abstract Tensile and low cycle fatigue tests were conducted at RT-600°C and cyclic softening behavior during low cycle fatigue was evaluated with temperature, strain range, heat treatment, aging, and welding. Yield stress decreased with temperature...
2011 / Dae Whan Kim, Woo-Seog Ryu -
Effect of hydrogen absorption on strain-induced low-cycle fatigue of low carbon steel
Abstract The effects of hydrogen have been studied on low carbon steel (JIS S10C), which contains limited amount of pearlite. Fatigue life and its strain rate dependence have been examined. The possible mechanism of hydrogen effect on those...
2010 / Y. Tsuchida, T. Watanabe, T. Kato, T. Seto -
Biosensing utilizing the motion of magnetic microparticles in a microfluidic system
Abstract The study for the design of a compact and inexpensive biosensing device, which can be operated either by primary care personnel or by patients as opposed to skilled operators, is presented. The main parts of the proposed device are a...
2010 / Ioanna Giouroudi, Sander van den Driesche, Jürgen Kosel -
Tribological Behaviour of Composite Coatings
Abstract In this paper the tribological behaviour and wear resistance of composite coatings based on zinc with PTFE (polytetrafluoroethylene) particles are investigated. The coating types included in this paper cover a broad range of coatings...
2011 / M. Pazderov, M. Bradac, M. Vales -
Partial least-squares regression for identification of liquid materials
Abstract Partial least-squares (PLS) regression was demonstrated as a promising suitable method to identify quantitatively liquid materials based on the profile of energy dispersive X-ray scattering spectrum in this paper. Methanol, ethanol,...
2010 / Wei Li, Yu Zhong, Yu Zhang, Daoyang Yu, Bai Sun, et al. -
Efficient Dynamic Simulation Based on Cross Section of Elastic Object
Abstract This study proposes an efficient dynamic simulation method for non destructive evaluation and non destructive characterization using finite element method. The method consists of an efficient algorithm and modeling for an object with...
2011 / Kazuhiro Suga -
Effects of impurity segregation to grain boundary on intergranular cracking in 2.25Cr-1W steel
Abstract Intergranular cracking behaviors in water quenched 2.25 Cr-1.5W heat-resistant steels are understood in the light of the formation of grain boundary carbides and the impurities segregation to grain boundaries or carbide interface at the...
2011 / Keun-Bong Yoo, Jae-Hoon Kim -
Preparation of highly selective, sensitive and stable hydrogen sensors based on Pd-doped tungsten trioxide
Abstract In this paper, highly selective, sensitive and stable hydrogen sensors based on Pd-doped tungsten trioxide were successfully prepared by promoting way. Two different morphologies of WO3 were obtained by chemical route synthesis (WO3...
2010 / A. Boudiba, C. Zhang, C. Navio, C. Bittencourt, R. Snyders, et al. -
Toward establishing a realistic benchmark for airframe noise research: issues and challenges
Abstract The availability of realistic benchmark configurations is essential to enable the validation of current Computational Aeroacoustic (CAA) methodologies and to further the development of new ideas and concepts that will foster the...
2010 / Mehdi R. Khorrami -
Radio Wave Generation Using Dark and Bright Soliton
Abstract In this study we propose a new system for radio wave using a soliton pulse within a micro waveguide and nano-waveguide. The system consists of two micro ring resonators and a nano ring resonator that can be integrated into a single system....
2011 / M.A. Jalil, A. Afroozeh, M.S. Aziz, I.N. Nawi, J.Ali, et al. -
The volume-based Strain Energy Density approach applied to static and fatigue strength assessments of notched and welded structures
Abstract A large bulk of experimental data from static tests of sharp and blunt V-notches and from fatigue tests of welded joints are presented in an unified way by using the mean value of the Strain Energy Density (SED) over a given finite-size...
2009 / Filippo Berto, Paolo Lazzarin -
Ice-microsphere templating to produce highly porous nanocomposite PLA matrix scaffolds with pores selectively lined by bacterial cellulose nano-whiskers
Abstract The production of 3D scaffolds for tissue engineering with provision of a controlled nano-topography remains a significant challenge. Here we have combined an ice-microsphere templating technique with thermally induced phase separation, and ...
2010 / J.J. Blaker, K.-Y. Lee, A. Mantalaris, A. Bismarck -
Microtactile Cantilever Resonators for Characterizing Surface Deposits
Abstract Silicon cantilever resonators fabricated in a slender geometry are investigated for detecting characteristics of local elasticity of different surface deposits by monitoring changes of resonance frequency and quality factor (Q-factor)...
2015 / Hutomo Suryo Wasisto, Ruochen Dang, Lutz Doering, Uwe Brand, Erwin Peiner -
Physical Properties and Application Performance of Platinum-Palladium-Rhodium Alloys Modified with Cerium2012 / Xin Hu, Yuantao Ning, Liangwei Chen, Qingnan Shi, Chaoguang Jia
-
Hydrogen microsensors with hydrogen sulfide traps
Abstract Hydrogen is often formed in sulfidic environments where interference from hydrogen sulfide has prevented its analysis by amperometric hydrogen microsensors. Hydrogen microsensors were made insensitive to hydrogen sulfide by placing a...
2015 / Michael Nielsen, Lars Hauer Larsen, Lars Ditlev Mørck Ottosen, Niels Peter Revsbech -
Ni–Al Protective Coating of Steel Electrodes in Dc Electrolysis for Hydrogen Production / Ni–Al Pārklājuma Ietekme Uz Tērauda Elektrodiem Līdzstrāvas Elektrolīzē Ūdeņraža Ražošanai2013 / P. Aizpurietis, M. Vanags, J. Kleperis, G. Bajars
-
SiGe Nanowires Grown by LPCVD using Ga-Au Catalysts2012 / M. Monasterio, A. Rodríguez, T. Rodríguez, C. Ballesteros
-
Hydrogel-Based Platforms for the Regeneration of Osteochondral Tissue and Intervertebral Disc2012 / Vincenzo Guarino, Antonio Gloria, Maria Grazia Raucci, Luigi Ambrosio
-
Advanced parametrical modelling of 24 GHz radar sensor IC packaging components2011 / R. Kazemzadeh, W. John, J. Wellmann, U. B. Bala, A. Thiede
-
Natural channel protein inserts and functions in a completely artificial, solid-supported bilayer membrane2013 / Xiaoyan Zhang, Wangyang Fu, Cornelia G. Palivan, Wolfgang Meier