Materials engineering topic list of research papers
-
DSP-Based Parallel Processing Model of Image Rotation
Abstract In the DSP real-time image processing, large amounts of data exchange and memory operation limit efficiency of the program implementation. In order to improve the efficiency of DSP, a model of blocking and parallel processing is proposed in ...
2011 / Zhang Shuang, Jin Gang, Qin Yu-ping -
Application of An Improved Motion Estimated Three Step Search Algorithm in infrared Video
Abstract Infrared video image compression is an important video processing technology infrastructure. This thesis proposes a efficient and fast block matching motion estimation algorithm. One strategy of this algorithm is to begin searching from two ...
2011 / Guo Jie-Rong, Liu Chang-Qing -
Analysis of science and nature corners in preschool institutions (Example of Konya province)
Abstract This research is done for the analysis of science and nature corners in preschool institutions in 25 primary schools of Meram county in Konya province. Physical properties of science and nature corners of preschool classes and materials on...
2009 / Erhan Alabay -
Si- and Ge-Substituted Polytricyclononenes as New Highly Permeable Polymer Materials2012 / M.V. Bermeshev, B.A. Bulgakov, L.E. Starannikova, M.L. Gringolts, Y.P. Yampolskii, et al.
-
A Botryococcus Strain with Bacterial Ectosymbionts Grows Fast and Produces High Amount of Hydrocarbons
Abstract A Botyrococcus braunii strain with high potential for biofuel production was isolated from a pond in Southeast Asia. This strain showed a higher growth rate (μ= 0.101/day) and biomass productivity (2.61 dry cell weight (dcw) g/L), both of...
2012 / Yuuhiko Tanabe, Syou Kato, Hiroshi Matsuura, Makoto M. Watanabe -
The application of the Bp neutral network in the estimation of non-point source pollution
Abstract In view of the relatively large basin area in China and the application limitations of small-scale, non-point source (NPS) pollution models, we developed an estimation platform for NPS based on a back propagation (Bp) network with the...
2012 / S.Q. Liu, X.F. Lu, R.M. Liu, W.H. Zeng, M.C. He -
Types and Levels of Ubiquitous Technology use among ICT Undergraduates
Abstract Due to the chrysalis of the advanced ubiquitous technology and their capabilities in assisting students to engage and occupy with the ubiquitous learning, most undergraduates have owned an au courant technology and using them ubiquitously...
2012 / Muliati Sedek, Rosnaini Mahmud, Habibah Ab. Jalil, Shafee Mohd Daud -
Fuel Consumption within Cargo Operations at the Port Industry A simulation Analysis on the Case of S Port Company in the UK
Abstract The principal objective of this study is to analyze the consumption of fuel in the port industry, in order to identify some possible solutions or improvements that might reduce costs. The increment of the total operation costs, and...
2012 / Alarcon Hernandez JA, Sung-woo CHO, Myong-sop PAK -
The Effect of Wire Electrical Discharge Machining on the Fatigue Life of Ti-6Al-2Sn-4Zr-6Mo Aerospace Alloy
Abstract The paper details experimental data for the fatigue behaviour of aeroengine alloy Ti-6Al-2Sn-4Zr-6Mo following wire electrical discharge machining (WEDM), with minimum damage generator technology and optimised trim pass strategies....
2013 / S.L. Soo, M.T. Antar, D.K. Aspinwall, C. Sage, M. Cuttell, et al. -
Modelling of damage development and failure in notched-bar multiaxial creep tests2004 / M. YATOMI, A. D. BETTINSON, N. P. O'DOWD, K. M. NIKBIN
-
Comparison between Conduction and Convection Effects on Self-Heating in Doped Microcantilevers2012 / Mohd Zahid Ansari, Chongdu Cho
-
The precipitation strengthening behavior of Cu-rich phase in Nb contained advanced Fe–Cr–Ni type austenitic heat resistant steel for USC power plant application
Abstract Copper has been used as a strengthening element in newly developed Fe–Cr–Ni type austenitic heat resistant steel for inducing Cu-rich phase precipitation to meet high temperature strength requirement for 600°C Ultra Super-Critical (USC)...
2012 / Cheng-yu Chi, Hong-yao Yu, Jian-xin Dong, Wen-qing Liu, Shi-chang Cheng, et al. -
Effect of surface modifications on shear banding and plasticity in metallic glasses: An overview
Abstract Previous results on the effect of surface structures, including intrinsic microstructural modification and extrinsic coating, on the plastic strain in tension, compression and bending were summarized. Sample confinement and residual...
2012 / T.G. Nieh, Y. Yang, J. Lu, C.T. Liu -
Effective cognitive characteristic in robustness of decentralized system
Abstract Decentralized systems can be defined as systems without a central element, and robustness of such system would depend on several parameters. Introducing Capra Cognitive Framework, the Immune System has been assessed as a decentralized...
2012 / Touraj Banirostam, Mehdi N. Fesharaki -
Effects of Magnetic Field on Radiative Flow of a Nanofluid Past a Stretching Sheet
Abstract Unsteady laminar boundary-layer flows of a nanofluid past a stretching sheet with thermal radiation in the presence of magnetic field have been studied numerically. The non-similar momentum, energy and concentration equations have been...
2013 / Md. Shakhaoath Khan, Md. Mahmud Alam, M. Ferdows -
Physical and Mechanical Properties of Bi-directional Jute Fiber Epoxy Composites
Abstract During last few years, the interest in using natural fibers as reinforcement in polymers has increased dramatically. Natural fibers are not only strong and lightweight but also relatively very cheap. In this research work, an investigation...
2013 / Vivek Mishra, Sandhyarani Biswas -
Effects of Selective Logging Methods on Runoff Characteristics in Paired Small Headwater Catchment
Abstract Reduction of vegetative cover by forest harvesting generally increases the average surface runoff volume and peak discharge for a given area of land. Forest harvesting in tropical Indonesian rainforest is managed using a selective logging...
2013 / Hatma Suryatmojo, Fujimoto Masamitsu, Ken’ichiro Kosugi, Takahisa Mizuyama -
Interactive morphologies: An investigation into integrated nodal networks and embedded computation processes for developing real-time responsive spatial systems
Abstract The design-research illustrated in this research article focus on the emerging field of interactive architecture focusing on developing real-time information exchanging architectural bodies. These interactive bodies demonstrate a fusion...
2012 / Nimish Biloria -
Two Dimensional Bistable Vibration Energy Harvester
Abstract In this paper a new strategy for broadband, bi-directional, vibration energy harvester is presented. Often energy harvesting systems address unidirectional incoming energy, however this is a strong limitation when considering real...
2012 / B. Andó, S. Baglio, F. Maiorca, C. Trigona -
Rice Straw and Cornstarch Biodegradable Composites
Abstract The main goal of this work was to use rice straw (RS) in the production of environmentally sound composites using corn based adhesives (CA). Treatments of RS with NaOH and hot-water were undertaken to evaluate the effect of such treatments...
2013 / Junjun Liu, Chanjuan Jia, Chunxia He