Materials engineering topic list of research papers
-
TEHL analysis of high-speed and heavy-load roller bearing with quasi-dynamic characteristics
Abstract In this paper, the aero-engine mainshaft roller bearing D1842926 under typical operating conditions is taken as a case study, a new integrated numerical algorithm of quasi-dynamics and thermal elastohydrodynamic lubrication (TEHL) is put...
2015 / Xiujiang Shi, Liqin Wang -
Development of 3D Boiler Header Template using Webots
Abstract Offline boiler header inspection is a tedious process if done manually since the opening is very small to insert big instruments and tools while the length can range up to 20 m. The geometry can also be complex since boiler tubes are...
2012 / Nur Maisurah Hassan Basri, Khairul Salleh Mohamed Sahari, Syed Sulaiman Kaja Mohideen, Nur Shahida Roslin, Adzly Anuar -
Food-pack Waste Systemic Management. Alternative Ways to Reuse Materials and to Develop New Business, Products and Local Markets
Abstract On the basis of latest data published by Eurostat (the statistical office of the EU) in 2008 Europe produced 80 million tons of packaging waste. Specifically, Italy produces about 12 million tons per year of waste from packaging, 2/3 of...
2012 / Clara Ceppa, Gian Paolo Marino -
Improving the End-of-Life for Electronic Materials via Sustainable Recycling Methods
Abstract Advanced Technology Materials, Inc. (ATMI) has developed a novel process based on green chemistry and green engineering methodologies for reclaiming valuable materials from waste electronics. We have demonstrated that we can recover metals...
2012 / Ping Jiang, Megan Harney, Yuxin Song, Ben Chen, Queenie Chen, et al. -
Negative Correlation Aided Network Module Extraction
Abstract In this paper, we propose a method to construct an unweighted co-expression network that considers both positive and negative correlation among gene expressions. A measure named NCNMRS(Negative Correlation aided Normalized Mean Residue...
2012 / Hasin Afzal Ahmed, Priyakshi Mahanta, Dhruba Kumar Bhattacharyya -
Performance Analysis on Briquetting Bio Mass with Different Size in 10kW Down Draft Gasifier
Abstract Now a day Briquetting of biomass material is significantly used in bio mass gasifier. It over come various problems in the production of producer gas in down draft gasifier in terms of quality, smoke reduction, higher thermal efficiency and ...
2012 / K.Sivakumar, N.Krishna Mohan, B. Sivaraman -
GHGT-9 Phosphate Materials for Lithium Batteries and Energy Storage
Abstract The trend to electrification in our societies calls for other sources of energy and storage than carbon materials, especially fossil ones. Lithium batteries have emerged in the last decades as a convenient way to store and deliver the most...
2012 / Michel Gauthier -
Tailor Made Screening Technology for different Screening Tasks in the Phosphate Industry
Abstract The paper will present an overview of specific requirements of the phosphate industry on screening processes and technology and in which way they can be met by choosing the right screening technology. Influencing parameters such as screen...
2012 / Oliver Pikhard, Sigurd Schütz -
Implantable Neural Signal Amplifier for Epileptic Seizure Prediction
Abstract This paper deals with the design of low power low noise Neural signal amplifier for Epileptic Seizure Prediction. The advent of Micro-electro Arrays has driven the need for implantable electronic circuitry to detect those Extracellular...
2012 / M. Santhanalakshmi, J. Alexander, M. Renuga, P.T. Vanathi -
Modification and Analysis of Compressor Intercooler Fin in Turbocharger Using FEM
Abstract Expressor is a device used in railway locomotives, consisting of two individual units called the compressor and exhauster. Compressor is used to compress the air and the exhauster is used to create vacuum. The function of the intercooler in ...
2012 / N. Senthil Kumar, C.K. Dhinakarraj, B. Deepanraj, N. Manikandan Babu, A. Santhoshkumar -
Atomic and vibrational origins of mechanical toughness in bioactive cement during setting2015 / Kun V. Tian, Bin Yang, Yuanzheng Yue, Daniel T. Bowron, Jerry Mayers, et al.
-
Improved MOF and Zeolite Membranes by Support Modification2012 / N. Wang, A. Huang, J. Caro
-
UV/VIS Response Based Fuzzy Logic for Health Assessment of Transformer Oil
Abstract UV-Spectrophotometer response is a nonintrusive test used to determine the transformer integrity. Information about the health of the power transformer that can be use to plan cost, maintenance, relocation and operational criteria can be...
2012 / Hasmat Malik, Surinder Singh, Mantosh Kr, R.K. Jarial -
Full Rate General Complex Orthogonal Space-Time Block Code for 8-Transmit Antenna
Abstract The need for mobile communication systems with high data rates and improved link quality for a variety of application has dramatically increased in recent years. Multiple antenna systems are an efficient means for increasing the...
2012 / N.S. Murthy, S.Sri Gowri -
The Calculating Model of the Gravity Dam-Reservoir-Foundation Based on the High-Order Transmitting Boundary
Abstract The analysis of the system of the gravity dam-reservoir-foundation is calculated using the Scaled Boundary Finite Element Method (SBFEM). The unbounded foundation is modeled by a high-order transmitting boundary based on the...
2012 / Liu Jun-yu, LIN Gao, HU Zhi-qiang, ZHANG yong -
Trend of Annual Runoff for Major Rivers in China under Climate Change
Abstract In order to understand the variation of hydrological regime for major rivers in China under climate change since 1950, the series of annual runoff for those rivers were analyzed by using several methods, including M-K method, accumulation...
2012 / Ying Gu, Jin Lin, Xiang-Lan Wang, Xu-Jun Zhang -
The Effect of Ultrasonic Treatment on the Particle Size and Specific Surface Area of LaCoO3
Abstract It is well known that the properties of the materials depend on the synthesis process. The controlled synthesis concern particle size and specific surface area of LaCoO3 material is necessary in many applications, such as catalysis and gas...
2012 / S. Sompech, A. Srion, A. Nuntiya -
Progress in control of microdomain orientation in block copolymers – Efficiencies of various external fields
Abstract Recent progresses in control of orientation for block copolymer microdomains using external fields, such as force fields, electric fields, and magnetic fields will be reviewed. Since it has been more recognized that such explicit external...
2008 / Shinichi Sakurai -
Structure and Magnetic-field Induced Effects in Mn-Ni(Fe)-Sn Metamagnetic Shape Memory Alloys
Abstract Martensitic structures, transformation behavior and some magnetic properties of a new series of Mn49Ni42-xFexSn9 (x = 0 – 4 at.%) metamagnetic shape memory alloys have been studied as a function of Fe content and magnetic field. Fe doping...
2015 / M. Sasmaz, V.A. Chernenko, E. Martinez, P. Lázpita, J.M. Barandiarán, et al. -
Assessment of the Characteristic of Thermal Barrier Coating Applied to Gas Turbine Blade by Thermo-Gradient Mechanical Fatigue Test
Abstract A gas turbine blade is under centrifugal force owing to high speed rotation and is under thermal fatigue owing to hot gas during the DSS (Daily Start and Stop) operation. Also, thermal barrier coating (TBC) is applied to protect a blade of...
2013 / In Hwan Shin, Dong Keun Lee, Yong Seok Kim, Jae Mean Koo, Chang Sung Seok, et al.