Materials engineering topic list of research papers
-
On Characterizing Strain Fields in Impact-Damaged Composites using Shape Descriptors
Abstract One approach to damage assessment in composite structures is to examine the strain field induced by service loads and compare the fields measured during maintenance with those observed in pristine or virgin components. Levels of damage that ...
2012 / Eann A. Patterson, Amol S. Patki -
Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites2002 / M. Cadek, J. N. Coleman, V. Barron, K. Hedicke, W. J. Blau
-
Characterization of properties of Al–Al2O3 nano-composite synthesized via milling and subsequent casting
Abstract In this research, the feasibility of adding mechanically activated nano-crystalline Al2O3 particles into aluminum matrix was investigated. For this purpose, Al2O3 powder was milled in a high-energy ball mill for 20h. Subsequently, 1wt.% of...
2012 / Mohsen Hossein-Zadeh, Mansour Razavi, Omid Mirzaee, Razieh Ghaderi -
Europium Structural Effect on a Borosilicate Glass of Nuclear Interest
Abstract Short and middle range order structure of a borosilicate glass of nuclear interest doped with europium oxide was investigated in this study. Neutron diffraction and Wide Angle X-ray Scattering were used as experimental techniques....
2012 / O. Bouty, J.M. Delaye, S. Peuget -
Prediction Methods to Determine Stability of Dam If There is Piping
Abstract In the paper, mechanism for generation of piping in dam and key factors that affect the generation of piping are analyzed; eight measured indexes are selected as basis of prediction; such prediction methods as Distance Discriminant Analysis ...
2012 / Liu Yongbiao -
A Rigorous Model of Service Component Architecture
Abstract The Service Component Architecture (SCA) provides a platform-independent component model for service-oriented development. A service component with different communication mechanisms and implementation languages can be modeled in SCA....
2008 / Zuohua Ding, Zhenbang Chen, Jing Liu -
Research on Power Information Encryption Algorithm Based on Composite Chaotic System in Wavelet Transform Domain
Abstract To meet the secret communication requirement of important power information in smart grid, this paper proposed a new power information encryption algorithm based on composite chaos wavelet and transform theory. The algorithm constructs the...
2011 / Li Xiaoming, Yun Zhao -
Design and Implementation of the FPGA-Based Wireless Network Card
Abstract This thesis presents the design and implementation of a wireless network card, it is based on FPGA platform. Our design achieved the efficient control algorithm of MAC layer, transplanted a compact embedded Linux operating system into its...
2011 / Weizhen Sun, Qiong Wu, Yong Xiang -
Catalytic Oxidation of Nitric Oxide to Nitrogen Dioxide on Ru-FAU2009 / Lingling Qu, Jinjun Li, Zhengping Hao, Landong Li
-
Residual Stress in Capacitive Micromachined Ultrasonic Transducers Fabricated with Anodic Bonding Using SOI Wafer
Abstract This paper focuses on a fabrication process for CMUTs using anodic bonding of a silicon on insulator wafer on a glass wafer. This technology makes possible the fabrication of large membranes and can extend the frequency range of CMUTs to...
2014 / V. Walter, G. Bourbon, P. Le Moal -
Actuation and Sensing properties of Electroactive Polymer Whiskers
Abstract In a world of unknown, touch modality is a key avenue for environments exploration. Implementation of such modality in mobile robot has been a major challenge for many research teams. Recently, several artificial whisker systems have been...
2012 / Nicolas Festin, Cédric Plesse, Claude Chevrot, Dominique Teyssié, Lou Josselin, et al. -
Biological and Chemical Information Technologies
Abstract Biological and chemical information technologies (bio/chem IT) have the potential to reshape the scientific and technological landscape. In this paper we briefly review the main challenges and opportunities in the field, before presenting...
2011 / Martyn Amos, Peter Dittrich, John McCaskill, Steen Rasmussen -
Introducing Six FET Flagship Pilot Actions
Abstract Future and Emerging Technologies (FET) is the EU pathfinder programme in information technologies. Now the European Commission raises its ambition to coordinate a Europe-wide research effort towards visionary technological targets. The...
2011 / Neelie Kroes -
In vitro transdermal permeation of fenoterol hydrobromide
Abstract The aim of this study was to determine if transdermal penetration of fenoterol, a β-agonist drug, could be enhanced and controlled by formulation modification and formulation of transdermal patches. Pre-formulation studies were performed to ...
2011 / Ahmed H. Elshafeey, Yassin E. Hamza, Soad Y. Amin, Hossein Zia -
Waste load allocation using non-dominated archiving multi-colony ant algorithm
Abstract The optimal Waste Load Allocation (WLA) problem, in general, is a mathematical model incorporating a water quality simulator within the framework of multi objective optimization. The goals are defined to improve the water quality and...
2011 / Seyyed Asghar Mostafavi, Abbas Afshar -
Application of Mathematical and Computer Modeling Methods to Manufacture High-Strength Unfired Gypsum Materials
Abstract A mathematical model of the process of gypsum optimal structure formation has been designed with the application of computer simulation methods. An optimal raw mix speciation and gypsum specimen strength top values corresponding to the...
2013 / V.B. Petropavlovskaya, Т.B. Novichenkova, А.F. Buryanov, Y.Y. Poleonova -
Design and Demonstration of a Neutron Spin Flipper for a New Neutron Reflectometer SHARAKU at J-PARC
Abstract A new neutron reflectometer SHARAKU with vertical sample-plane geometry was installed on the beam line 17 (BL17) at Materials and Life science experiment Facility (MLF) at J-PARC. Magnetism in a thin magnetic film is one of the main targets ...
2013 / Hirotoshi Hayashida, Masayasu Takeda, Dai Yamazaki, Ryuji Maruyama, Kazuhiko Soyama, et al. -
Microstructure and growth kinetics of Ce and Y jointly modified silicide coatings for Nb–Ti–Si based ultrahigh temperature alloyMicrostructure and growth kinetics of Ce and Y jointly modified silicide coatings for Nb–Ti–Si based ultrahigh temperature alloyretain-->
Abstract In order to protect NbTiSi based ultrahigh temperature alloy from oxidation, pack cementation processes were utilized to prepare Ce and Y jointly modified silicide coatings. The Ce and Y jointly modified silicide coating has a...
2013 / Yingtian Liu, Xiping Guo -
Magnetic Shield Design of In-situ SEOP Polarized 3He Neutron Spin Filter System
Abstract A polarized 3He neutron spin filter requires a suitably homogeneous magnetic environment to avoid depolarization of 3He nuclear spin. In the present study, we discussed the required performance of the magnetic shield for an in-situ spin...
2013 / H. Kira, Y. Sakaguchi, J. Suzuki, T. Oku, M. Nakamura, et al. -
Effects of temperature and stress on the creep behavior of a Ni3Al base single crystal alloy
Abstract The creep behavior and microstructure of a Ni3Al base single crystal alloy IC6SX with [001] orientation under the testing conditions of 760°C/593MPa, 980°C/205MPa, and 1100°C/75MPa were investigated. The experimental results showed that...
2013 / Zhigang Kong, Shusuo Li