Materials engineering topic list of research papers
-
Modeling Creep Behaviour of Boiler Grade Steels - Application to Grade 92 Steel
Abstract Power generation is now striving to improve the global efficiency of boiler plants, targeting 50% or higher. To accommodate the necessary increase in steam temperature, new materials may be developed and/or existing materials must be...
2013 / E. Cini, E. Desdoit, A. Villani, J. Besson -
Experimental Investigations on a Conventional Air- conditioner Working as Air-water Heat Pump
Abstract For conventional air-conditioner, heat absorbed from air conditioning room is dispersed into the atmosphere through air-cooled condenser. In order to recover the waste heat, water-cooled condenser can be employed in conventional...
2011 / Yu Wang, Yuwen You, Zhigang Zhang -
Evolution of Microstructure During Tensile Deformation of TB5 Titanium Alloy
Abstract Evolution of microstructure of TB5 titanium alloy was studied during tensile deformation. It was found that the slip bands increased and the angle of slip bands decreased when deformation displacement increased. Besides, during elastic...
2012 / Qingrui Wang, Aixue Sha, Guoqing Wu -
Hemoglobin Detection in Opaque Particular Fluids
Abstract A measurement system for free hemoglobin in opaque particular liquids was developed. Sophisticated systems for specific toxin removal in extracorporeal blood purification are based on particular adsorbent suspensions. In case of treatment...
2012 / M. Brandl, KH. Kellner, I. Bado, T. Posnicek, D. Falkenhagen -
Design Of The Temperature Signal Wireless Receiver And Display System On Polishing Interface In Chemical Mechanical Polishing
Abstract In this paper, the temperature signal wireless receiver and display system has been described online based on the microcontroller in chemical mechanical polishing. The system uses a low-power and high-performance AT89S52 microcontroller and ...
2011 / Gao Hong, Su Jianxiu -
Expert System of Fault Diagnosis for Gear Box in Wind Turbine
Abstract Gear box is one of the key components in wind turbine. To make timely and accurate diagnosis for gear box, an expert system based on fault tree analysis is developed in this paper. Firstly, a fault tree model is established in accordance...
2012 / YANG Zhi-Ling, WANG Bin, DONG Xing-Hui, LIU Hao -
Phosphorescent Organic Light-Emitting Devices: Working Principle and Iridium Based Emitter Materials2008 / Stefan Kappaun, Christian Slugovc, Emil J. W. List
-
3He Impurity Effects on the Growth Kinetics of 4He Crystals2005 / M. Suzuki, M. Thiel, P. Leiderer
-
Fabrication of Superconducting Quantum Interference Device Magnetometers on a Glass Epoxy Polyimide Resin Substrate with Copper Terminals
Abstract We have developed fabrication technique of superconducting quantum interference device (SQUID) magnetometers based on Nb/AlAlOx/Nb junctions directly on a glass epoxy polyimide resin substrate, which has copper terminals embedded in...
2012 / Jun Kawai, Miki Kawabata, Daisuke Oyama, Gen Uehara -
Design and Test Results of a 1 MVA Resistive Type Fault Current Limiter
Abstract The 1 MVA resistive type single phase AC fault current limiter (FCL) was build and successfully tested by capacitors battery discharge. FCL rated voltage is 3.5kV, current 250 Arms. The 240 m of HTS tape (type SF12100 by SupePower) was used ...
2012 / V.E. Keilin, V.V. Lobyntsev, M.S. Novikov, S.J. Novikov, V.I. Shcherbakov -
Sub-Micron SNIS Josephson Junctions for Metrological Application
Abstract The overdamped Nb/Al-AlOx/Nb superconductor-normal metal-insulator-superconductor SNIS Josephson junctions recently developed at INRIM exhibit high values of critical current density and characteristic voltage, making these devices...
2012 / N. De Leo, M. Fretto, A. Sosso, E. Enrico, L. Boarino, et al. -
New Material Requirements for Superconductor Grid Technology
Abstract Superconductor ac and dc cables, fault current limiters and wind turbine generators offer solutions to key challenges in modernizing electric power infrastructure around the world. High critical current Jc is an essential requirement for...
2012 / A.P. Malozemoff -
Synthesis and optical properties of self-assembled flower-like CdS architectures by mixed solvothermal process2010 / Junhao Zhang, Yuhui Wu, Jia Zhu, Shaoxing Huang, Dongjing Zhang, et al.
-
Dependence of the magnetic properties of MnGaN epitaxial layers on external electrical field2009 / Dimiter Alexandrov
-
Sol-Gel Synthesis of SiO<sub>2</sub>-CaO-Na<sub>2</sub>O-P<sub>2</sub>O<sub>5</sub> Bioactive Glass Ceramic from Sodium Metasilicate2013 / Luqman A. Adams, Enobong R. Essien, Rafiu O. Shaibu, Aderemi Oki
-
Comparative proteomic analysis of the response in resistant and susceptible maize inbred lines to infection by Curvularia lunata
Abstract Proteins differentially expressed from maize leaves in response to the infection by Curvularia lunata strain CX-3 were identified through a high-resolution two-dimensional gel electrophoresis (2-DE) method. Two inbred lines, 78599-1 and...
2009 / Xiuli Huang, Lixing Liu, Jie Chen, Yuhong Zhai -
Synthesis of dental resins using diatomite and nano-sized SiO2 and TiO2
Abstract The mechanical properties of dental composites were improved by porous diatomite and nano-sized silica (OX-50) used as co-fillers. The resin composites, filled with silanized OX-50 and silanized diatomite (40:60wt/wt), presented the best...
2012 / Xiaoli Miao, Meifang Zhu, Yaogang Li, Qinghong Zhang, Hongzhi Wang -
The effect of pressure on the elastic constants of Cu, Ag and Au: a molecular dynamics study2006 / Yasemin Çiftci, Kemal Çolakoğlu, Sefa Kazanç, Sonerözgen
-
Assessment of Medium Temperature Collectors for Process Heat
Abstract Medium temperature collectors will play an important role in the development of process heat applications. Nevertheless, the assessment and comparison of collectors based on different technologies is not yet straight forward from the...
2012 / Víctor Martínez, Ramon Pujol, Andreu Moià -
Water to Nanofluids Heat Transfer in Concentric Tube Heat Exchanger: Experimental Study
Abstract Concentric tube heat exchanger is a low cost, which increases reliability by restricting mixing of fluids exchanging heat. Concentric tube heat exchanger has potential application such as heat recovery from engine cooling circuit, oil...
2013 / Rohit S. Khedkar, Shriram S. Sonawane, Kailas L. Wasewar