Materials engineering topic list of research papers
-
Laser Adaptive System for Measurement of Molecule Mass and Concentration
Abstract A Laser adaptive microweighting system for measurement of molecules mass based on the principles of adaptive holog aphic interferometry is proposed and experimentally tested in task of gas concentration measurement. A sensitive element of...
2015 / R.V. Romashko, Y.N. Kulchin, T.A. Efimov, A.A. Sergeev, A.V. Nepomnyashiy -
Inverse characterization of plates using zero group velocity Lamb modes
Abstract In the presented work, the characterization of plates using zero group velocity Lamb modes is discussed. First, analytical expressions are shown for the determination of the k ...
2015 / Clemens Grünsteidl, Todd W. Murray, Thomas Berer, István A. Veres -
Ontology-based Determination of Alternative CNC Machines for a Flexible Resource Allocation
Abstract In case of an unplanned machine breakdown, alternative resources have to be found quickly to avoid delays in following process steps. In order to counter this, an automated determination of alternative CNC-machines and a reliable validation ...
2015 / Gerald Rehage, Jürgen Gausemeier -
Synthesis and Analysis of Ternary Oxide Nanomaterial for Electro-thermal Applications
Abstract Binary Semiconducting Oxides have quite stable properties. The quest for enhancing the properties of materials even further, leads us to evaluate Zinc-Tin-Oxide, which is a ternary semiconducting oxide material known for its unique...
2015 / D. Sreedhar, Y. Vinod Reddy, V. Vasudeva Rao -
The Behavior of Clayey Soil Reinforced With Waste Aluminium Pieces
Abstract There are huge amounts of waste metal pieces produced from the processes of the metal industry, the disposal of these waste materials face financial and environmental difficulties. The present study aims to investigate the effect of...
2015 / Zuheir Karabash, Ali Fırat Çabalar, Nurullah Akbulut -
Modeling Internal Logistics by Using Drones on the Stage of Assembly of Products
Abstract The subject addressed in this paper is the issue of using an UAV type Quadcopter in the internal logistics within a manufacturing plant, particularly at the stage of assembly and /or customization of products. The vertical takeoff and...
2015 / Víctor Olivares, Felisa Cordova, Juan M. Sepúlveda, Ivan Derpich -
The effect of neodymium substitution on the structural and magnetic properties of nickel ferrite
Abstract Nickel ferrite NiFe2O4 is a typical soft magnetic ferrite with high electrical resistivity used as high frequency magnetic material. Neodymium (Nd3+) doped NiFe2O4 materials were fabricated using solid state reaction. The properties of the...
2015 / İsrafil Şabikoğlu, Levent Paralı, Ondrej Malina, Petr Novak, Josef Kaslik, et al. -
Passivation of defect states in surface and edge regions on pn-junction Si solar cells by use of hydrogen cyanide solutions2009 / Masao Takahashi, Takeru Shishido, Hitoo Iwasa, Hikaru Kobayashi
-
Fabrication of thermoformable circuits by laser patterning of metallized thermoplastic foils
Abstract High-resolution laser patterning offers innovative methods for the manufacturing of threedimensional interconnect devices. The process chain presented in this paper uses cost efficient metal thin-films sputtered on thermoplastic sheets and...
2010 / Bodo Wojakowski, Ulrich Klug, Jan Düsing, Rainer Kling -
Theory and experiment for single lens fiber optical microphone
Abstract This work reports a theory for the single lens fiber optical microphone. Computational simulation and experimental results were compared presenting good agreement. It is shown that the operating principle of this microphone is based in...
2010 / João Marcos Salvi Sakamoto, Gefeson Mendes Pacheco -
High Efficiency and Low Cost of Electricity Generation from Fossil Fuels While Eliminating Atmospheric Emissions, Including Carbon Dioxide
Abstract NET Power has developed a novel, oxy-fuel thermodynamic power cycle [1] that uses hydrocarbon fuels, captures 100% of atmospheric emissions, including all carbon dioxide, and has a cost of electricity that is highly competitive with the...
2013 / R.J. Allam, Miles R. Palmer, G. William Brown, Jeremy Fetvedt, David Freed, et al. -
Fireside Corrosion of Applied and Modern Superheater-alloys Under Oxy-fuel Conditions
Abstract Operation of oxy-fuel power plants under ultra-supercritical parameters would help to overcome, to a certain extent, efficiency penalties from air separation and CO2-compression units. To improve the knowledge on material behavior under...
2013 / Gosia Stein-Brzozowska, Jörg Maier, Günter Scheffknecht, Danila Cumbo, Silvia Masci, et al. -
GaAs 3-axis Coriolis vibrating micro rate gyro: concept and preliminary characterization
Abstract Abstract This paper presents a GaAs based piezoelectric Coriolis Vibrating Gyroscope (CVG) which measures rotation rates along the three orthogonal directions of space by using a single vibrating structure. The proposed design shows...
2010 / I. Roland, S. Masson, O. Ducloux, O. Le Traon, A. Bosseboeu -
THE BIOLOGICAL MICROPROCESSOR, OR HOW TO BUILD A COMPUTER WITH BIOLOGICAL PARTS
Abstract Systemics, a revolutionary paradigm shift in scientific thinking, with applications in systems biology, and synthetic biology, have led to the idea of using silicon computers and their engineering principles as a blueprint for the...
2013 / Gerd HG Moe-Behrens -
Magneto-Seebeck effect in magnetic tunnel junctions with perpendicular anisotropy2017 / Keyu Ning, Houfang Liu, Zhenyi Ju, Chi Fang, Caihua Wan, et al.
-
Traditional Vinegars Identification by Colorimetric Sensor
Abstract An expanded colorimetric array detector that was capable of the highly sensitive and highly selective discrimination of vinegars was developed. The system of olfaction visualization and operational approach were discussed. Thirty dyes were...
2012 / XiaoBo. Zou, YanXiao Li, JiYong Shi, Xiaowei Huang, JieWen Zhao -
Experimental demonstration on the ultra-low source∕drain resistance by metal-insulator-semiconductor contact structure in In0.53Ga0.47As field-effect transistors2013 / M.-H. Liao, P.-K. Chen
-
A new hybrid optimization method inspired from swarm intelligence: Fuzzy adaptive swallow swarm optimization algorithm (FASSO)
Abstract In this article, the objective was to present effective and optimal strategies aimed at improving the Swallow Swarm Optimization (SSO) method. The SSO is one of the best optimization methods based on swarm intelligence which is inspired by...
2015 / Mehdi Neshat, Ghodrat Sepidname -
From Fermat's Principle to Invisibility
Abstract We present the details of an invisibility cloak whose implementation would not require unphysical material properties, i.e. refractive indices that are singular or less than unity. To achieve this aim, we take the Non-Euclidean Cloak...
2011 / Janos Perczel, Ulf Leonhardt -
An accurate 3D inspection system using heterodyne multiple frequency phase-shifting algorithm
Abstract This paper presents an accurate 3D inspection system for industrial applications, which uses digital fringe projection technology. The system consists of two CCD cameras and a DLP projector. The mathematical model of the 3D inspection...
2011 / Zhenzhong Xiao, Oichoo Chee, Anand Asundi