Materials engineering topic list of research papers
-
Field electron emission based on resonant tunneling in diamond/CoSi2/Si quantum well nanostructures2012 / Changzhi Gu, Xin Jiang, Wengang Lu, Junjie Li, Siegfried Mantl
-
Microstructures and tensile properties of submerged friction stir processed AZ91 magnesium alloy
Abstract 6 mm thick AZ91 casting alloy plates were subjected to normal friction stir processing (NFSP, in air) and submerged friction stir processing (SFSP, under water), and microstructures and tensile properties of the experimental materials were...
2015 / Fang Chai, Datong Zhang, Yuanyuan Li -
Perspectives on Innovation and Technology Transfer
Abstract In an effort to understand development of economics, research fields such as innovation and technology transfer have emerged. Growing competition determines the importance of innovation and technology transfer. The purpose of the Paper is...
2015 / Mikus Dubickis, Elina Gaile-Sarkane -
Effect of reactive ion beam etching on the photoluminescence of CdTe epitaxial layers2008 / J. Martinez-Pastor, D. Fuster, M. Abellán, J. Anguita, N. V. Sochinskii
-
Bending and Shear Behavior of a Composite Beam Strengthened and Double-Confined with FRP-Jacket
Abstract Construction and building industries are responsible for the depletion of large amounts of non-renewable resources. Reducing the raw materials consumption by using bio-products is considered as a significant step to achieve a sustainable...
2015 / Souad Ait Taleb, Abdelmadjid Si Salem, Kamal Ait tahar -
A mild alkali treated jute fibre controlling the hydration behaviour of greener cement paste2015 / Byung-Wan Jo, Sumit Chakraborty
-
Novel Blend Membranes Based on Acid-Base Interactions for Fuel Cells2012 / Zicheng Zuo, Yongzhu Fu, Arumugam Manthiram
-
Extensive Characterisation of Copper-clad Plates, Bonded by the Explosive Technique, for ITER Electrical Joints
Abstract Cable-in-conduit conductors will be extensively implemented in the large superconducting magnet coils foreseen to confine the plasma in the ITER experiment. The design of the various magnet systems imposes the use of electrical joints to...
2015 / S.A.E. Langeslag, S. Sgobba, P. Libeyre, C.-Y. Gung -
Low Leakage and High Performance tag Comparator Implemented in 180nm CMOS Technology
Abstract The parasitic capacitance in the dynamic node increases for wide tag comparator increasing the delay and power consumption. The output signal may also degrade with high performance computing that uses clock frequency over 1GHz. In this...
2015 / Lidiya Mariam Koshy, G. Jyothish Chandran -
Integrated System for Detection of Dangerous Materials and Illicit Objects in Cargoes
Abstract Terrorist attacks have nowadays become a serious threat, and this threat only continues to grow. The objects of transport infrastructure are among the primary targets for such attacks. We review the existing means of detecting the...
2015 / Petr Avtonomov, Valeria Kornienko -
Local buckling analysis of biological nanocomposites based on a beam-spring model
Abstract Biological materials such as bone, tooth, and nacre are load-bearing nanocomposites composed of mineral and protein. Since the mineral crystals often have slender geometry, the nanocomposites are susceptible to buckle under the compressive...
2015 / Zhiling Bai, Baohua Ji -
Thermal Analysis of a Receiver for Linear Fresnel Reflectors
Abstract This paper presents an advanced methodology for the detailed modeling of the heat transfer and dynamics phenomena in Linear Fresnel receivers. The present work aims at modeling Linear Fresnel receiver by proposing a parallel modular...
2015 / E. Guadamud, A. Oliva, O. Lehmkuhl, I. Rodriguez, I. González -
Investigation of activated carbon adsorbent electrode for electrosorption-based uranium extraction from seawater
Abstract To support the use of nuclear power as a sustainable electric energy generating technology, long-term supply of uranium is very important. The objective of this research is to investigate the use of new adsorbent material for cost effective ...
2015 / Aznan Fazli Ismail, Man-Sung Yim -
Expression profiling of long noncoding RNAs in neonatal and adult mouse testis
Abstract In recent years, advancements in genome-wide analyses of the mammalian transcriptome have revealed that long noncoding RNAs (lncRNAs) is pervasively transcribed in the genome and an increasing number of studies have demonstrated lncRNAs as...
2015 / Jin Sun, Ji Wu -
A Numerical Experiment to Determine the Soil Water Contents in the Unsaturated Zone and the Water Table Response under Transient Ponding Conditions
Abstract A model based on analytical solutions derived from the 2-phase flow theory for infiltration and drainage processes under transient supply conditions is presented here. The mathematical derivations are based on the knowledge of unsaturated...
2015 / C. Miracapillo, H. Morel-Seytoux -
Experimental and Numerical Characterization of Ceramic and Metallic Absorbers under Lab-scale Conditions
Abstract Volumetric receiver technology has a huge potential for increase in the receiver and power block efficiencies by reducing the radiative thermal losses and increasing the temperature of the heat transfer fluid. With the aim of improving the...
2015 / M.I. Roldán, A. Avila-Marin, M. Alvarez-Lara, J. Fernandez-Reche -
Flow Pattern Transition of Fine Cohesive Powders in a Gas-Solid Fluidized Bed under Mechanical Vibrating Conditions
Abstract In this study, the fluidization characteristics for fine cohesive powders under mechanical vibrating conditions were experimentally investigated. In a case of handling of fine cohesive powders with fluidized bed, stable gas channels and...
2015 / Yoshihide Mawatari, Yasumasa Hamada, Masato Yamamura, Hiroyuki Kage -
Development of Large-scale 3D Map Generation System for Indoor Autonomous Navigation Flight – Work in Progress
Abstract SLAM (Simultaneous Localization and Mapping) technology has been studied to look for current position and generate map simultaneously in computer vision research area. The technique is one of the most widely researched topics in Robotics...
2015 / SungTae Moon, Wesub Eom, Hyunchul Gong -
Design of a Hydrogen Pulsating Heat Pipe
Abstract In order to enhance the application of a cryocooler that provides cooling capacity at the cold head location, and effectively spread that cooling over an extended region, one requires an efficient heat transfer method. The pulsating heat...
2015 / Yumeng Liu, Haoren Deng, John Pfotenhauer, Zhihua Gan -
Processing, microstructure and mechanical properties of bimodal size SiCp reinforced AZ31B magnesium matrix composites
Abstract The bimodal size SiC particulates (SiCp) reinforced magnesium matrix composites with different ratios of micron SiCp and nano SiCp (M-SiCp:N-SiCp = 14.5:0.5, 14:1, and 13.5:1.5) were prepared by semisolid stirring assisted ultrasonic...
2015 / M.J. Shen, M.F. Zhang, W.F. Ying