Electrical engineering, electronic engineering, information engineering topic list of research papers
-
Comparative Analysis on the Rule-based Control Strategy of Two Typical Hybrid Electric Vehicle Powertrain
Abstract Series-Parallel Hybrid ElectricVehicle (HEV) has well applied in practice due to its significant advantages, this paper aimed at two different kind of Series-Parallel HEV configurations: Power Split and Mode Switching configuration,...
2016 / Jingda Wu, Jiankun Peng, Hongwen He, Jiayi Luo -
Design and implementation methodology for rapid control prototyping of closed loop speed control for BLDC motor
Abstract This paper deals with rapid control prototyping implementation of closed loop speed control for a Brushless dc (BLDC) motor drive using dSPACE DS1103 controller board. Generally control algorithms which are developed for the motor drive...
2017 / Devendra Potnuru, Alice Mary K., Saibabu Ch. -
SADEA-II: A generalized method for efficient global optimization of antenna design
Abstract Efficiency improvement is of great significance for simulation-driven antenna design optimization methods based on evolutionary algorithms (EAs). The two main efficiency enhancement methods exploit data-driven surrogate models and/or...
2016 / Bo Liu, Slawomir Koziel, Nazar Ali -
Optimal Allocation of Reactive Power Compensators and Energy Storages in Microgrids Considering Uncertainty of Photovoltaics
Abstract The intermittence of DGs which challenges the voltage and power quality manifests the need for new planning and operation strategies for microgrids. Considering the uncertainty of PV output, the advantages of both reactive power...
2016 / Shiyu Liu, Fan Liu, Tao Ding, Zhaohong Bie -
Multiband rectenna for microwave applications
Abstract This paper reports a multiband rectenna (rectifier + antenna) suitable for the electromagnetic energy harvesting of the spill-over loss of microwave antennas placed on board of geostationary satellites. Such rectenna is used for powering...
2016 / Abderrahim Okba, Alexandru Takacs, Hervé Aubert, Samuel Charlot, Pierre-François Calmon -
Implementation of Extended Kalman Filter Based Dynamic State Estimation on SMIB System Incorporating UPFC Dynamics
Abstract Power system state estimation holds great relevance with increasing concern about system reliability and security now-a-days. There is an added dimensionality in the concept and underlying techniques used in power system state estimation;...
2016 / Meera R. Karamta, J.G. Jamnani -
Study on Three-phase Stability Simulation Model of Distributed Generation System for Multi Energy Utilization
Abstract There are many different kinds of energy in future multi-energy system, such as electric, gas, heat and hydrogen. Distributed generation system integrated as microgrid is one of the most important use form of multi-energy system for...
2016 / Wang Dan, Chen Zhao-yu, Zhang Jia-an, Jia Hong-jie, LI Bin, et al. -
Power Energy Management and Control Strategy Study for Extended-range Auxiliary Power Unit
Abstract This paper describes a coordination control procedure in auxiliary power unit (APU) power source system for a range extended electric vehicle (RE–EV). Based on the characteristics of urban traffic conditions, the matching on power and...
2016 / Hong Zhang, Lin Fu, Jiajian Song, Qiangqiang Yang -
Layout parameter analysis in Shannon expansion theorem based on 32bit adder circuit
Abstract The 1-bit adder circuits are schematized using pass transistor logic (PTL) technique, that’s optimized by the Shannon expansion theorem. The proposed 32bit carry increment adder (CIA) circuit is designed by bit slice method. The CIA adder...
2016 / C. Senthilpari, K. Diwakar, Kumar Munusamy, J. Sheela Francisca -
Scaled Hardware Implementation of a Full Conversion Wind Turbine for Low Frequency AC Transmission
Abstract Low Frequency AC Transmission (LFAC) at 16.7Hz is seen by many as a realistic cost effective alternative to VSC-HVDC for the interconnection of offshore wind. The implementation of the LFAC transmission system envisaged in this work...
2016 / Ronan Meere, Ismail Ibrahim, Jonathan Ruddy, Cathal O’Loughlin, Terence O’Donnell -
Optimal Provision of Primary Frequency Control with Battery Systems by Exploiting All Degrees of Freedom within Regulation
Abstract Battery energy storage systems have a large potential for provision of grid ancilliary services. Specifically, large battery systems have been used for the provision of primary control reserve. Batteries providing this grid service must,...
2016 / Raphael Hollinger, Luis M. Diazgranados, Christof Wittwer, Bernd Engel -
An Analytical Method for Optimal Capacitors Placement from the Inversed Reduced Jacobian Matrix
Abstract This paper presents a novel analytical methodology to determine location for optimal shunt capacitor placement in power systems. The new method modifies modal analysis technique and develops new formulation to compute the Reactive...
2016 / Ardiaty Arief, Antamil, Muhammad Bachtiar Nappu -
Two challenges in embedded systems design: predictability and robustness2008 / T. A Henzinger
-
Towards a comprehensive policy for electricity from renewable energy: Designing for social welfare
Abstract The governance of renewable electricity in Europe beyond 2020 is still uncertain. The only certain aspects are that national level targets will be abolished beyond 2020, and that most renewable electricity support schemes will take the form ...
2016 / Kaveri K. Iychettira, Rudi A. Hakvoort, Pedro Linares, Rob de Jeu -
Digital holographic setups for phase object measurements in micro and macro scale2015 / Vít Lédl, Pavel Psota, Roman Doleček, Tomáš Vít
-
Frequency Control Strategy of Hybrid Energy Storage System for Microgrid Based on Frequency Hysteretic Loop
Abstract In this paper, a frequency control strategy of hybrid energy storage system (HESS) for autonomous microgrid (AMG) based on a frequency hysteretic loop is proposed. The control strategy is composed of two modes. Mode I coordinates the...
2016 / Qi Yan, Qu Bo, Yang Jingjie, Mu Yunfei, Guo Bingqing -
Predicting the Displacement Gain from the Mechanical Quality Factor in Ultrasonic Transducers
Abstract The displacement gain is the most important performance parameter for power ultrasonic transducers typically used for welding or cutting: it controls the proportional relationship between the displacement of the tool and the voltage or...
2016 / Dominick A. DeAngelis -
Features of the Data Transmission in the Wireless Capsule Endoscopic Complex
Abstract This article describes the features of the data transmission between a wireless endoscopic capsule and a reading device. The advantages and disadvantages of using a uni-and a bidirectional communication in the capsule are considered and the ...
2016 / Artem Anpilogov, Ivan Bulychev, Anastasia Tolstaya -
Control and management of distribution system with integrated DERs via IEC 61850 based communication
Abstract Distributed Energy Resources (DERs) are being increasingly integrated in the distribution systems and resulting in complex power flow scenarios. In such cases, effective control, management and protection of distribution systems becomes...
2016 / Ikbal Ali, S.M. Suhail Hussain -
Robustness and Vulnerability of Networks with Dynamical Dependency Groups2016 / Ya-Nan Bai, Ning Huang, Lei Wang, Zhi-Xi Wu