Civil engineering topic list of research papers
-
First Stepping Stones of Alternative Refurbishment Modular System Leading to Zero Energy Buildings
Abstract Housing stock is one of the major energy consumers in Europe, or the Czech Republic respectively, and it is not easy to reach European 20/20/20 target with an envelope insulation only. Therefore a deep renovation alternative consisting of...
2017 / Petr Hejtmánek, Martin Volf, Kateřina Sojková, Radek Brandejs, Michal Kabrhel, et al. -
Study on Construction Quality Control of Urban Complex Project Based on BIM
Abstract Urban complex of high efficiency, complex, intensive determines its modernization, urbanization, internationalization of the inevitable product. And it will become the city's landmark buildings and promotes local economic and cultural...
2017 / Junying Lou, Jiang Xu, Kun Wang -
Attention Guidance, Perceived Brightness and Energy Demand in Retail Lighting
Abstract The presentation of merchandise often happens undifferentiated with a high level of brightness causing high energy demand. For human perception this results in intense light pressure and risk of increased glare. We developed and...
2017 / Andreas Ampenberger, Siegmund Staggl, Wilfried Pohl -
Comparison and Evaluation of Fare Collection Technologies in the Public Transport
Abstract The development of electronic fare collection technologies records currently considerable progress in many types of payments, including the application in transport. Use of new technologies in public transport contributes both to higher...
2017 / Ivana Olivková -
Hardened properties of self-compacting concrete with different crumb rubber size and content
Abstract This paper aims at investigating the effect of crumb rubber size and content on hardened characteristics of self-compacting concrete. To this end, different self-compacting concrete mixtures were designed at constant water-to-binder ratio...
2017 / Nahla Naji Hilal -
New Trends In Rehabilitation Of Patients With Multiple Sclerosis2014 / Andrzej Kwolek, Justyna Podgórska, Justyna Rykała
-
A Piecewise Acceleration-Optimal and Smooth-Jerk Trajectory Planning Method for Robot Manipulator along a Predefined Path2012 / Yuan Chen, Bing Li
-
Numerical Modelling of Metal/Flux Interface in a Continuous Casting Mould / Modelowanie Numeryczne Powierzchni Międzyfazowej Metal/Ciekły Żużel W Krystalizatorze Do Ciągłego Odlewania Stali2016 / J. Jowsa, M. Bielnicki, A. Cwudziński
-
Exploring the uncertainty in capacity estimation at roundabouts2017 / Orazio Giuffrè, Anna Granà, Maria Luisa Tumminello
-
Life Cycle Cost Modelling of Buildings with Consideration of the Risk2016 / E. Plebankiewicz, K. Zima, D. Wieczorek
-
Shear and Flexural Capacity of Reinforced Concrete Members with Circular Cross Section
Abstract An experimental study of the shear and flexural behavior of reinforced concrete members with solid circular cross sections is presented. The test was carried out on six specimens. Three were confined with circular hoops, and three had no...
2017 / Rendy Thamrin, Ruddy Kurniawan, Annisa Prita Melinda -
Characterization of effects of thermal property of aggregate on the carbon footprint of asphalt industries in China
Abstract In this study, the effects of the thermal properties of asphalt binders and aggregate materials were characterized in terms of the specific heat capacity (C) for energy consumption and environmental footprints of hot mix asphalt (HMA) and...
2017 / Ali Jamshidi, Kiyofumi Kurumisawa, Toyoharu Nawa, Jize Mao, Ben Li -
Discussing Vehicle Hydraulic Generator Transient Index Control
Abstract With the continuous development of military equipment and technology, the demands for mobile power station, especially the vehicle hydraulic generator set, increase rapidly. In order to improve the transient index of the vehicle hydraulic...
2017 / Zou Bingyan, Han Yu -
A Feasibility Study of Power Generation from Sewage Using a Hollowed Pico-Hydraulic Turbine
Abstract This study is concerned with the feasibility of power generation using a pico-hydraulic turbine from sewage flowing in pipes. First, the sewage flow rate at two connection points to the Toyogawa River-Basin Sewerage, Japan, was explored for ...
2017 / Tomomi Uchiyama, Satoshi Honda, Tomoko Okayama, Tomohiro Degawa -
The Potential Use of Nanoclayto Increa Strength of Contaminated Soil2016 / Zomorodian Seyed Mohammad Ali, Moghispour Shabnam, Soleymani Armina
-
Use of Life Cycle Assessments in the Construction Sector: Critical Review
Abstract A life cycle assessment (LCA) is an internationally accepted and useful tool to assess the environmental impact of products. In this paper, the use of LCA in the construction sector has been critically analyzed. The analysis is based on...
2017 / Charlotte Dossche, Veerle Boel, Wouter De Corte -
Research on Application of BIM 5D Technology in Central Grand Project
Abstract The traditional construction industry's production efficiency is comparatively low and the waste of resources is serious, which has seriously hindered the construction industry green sustainable development. With the application of BIM 5D...
2017 / Jiang Xu -
Instability Phenomena in Municipal Waste Landfill. Numerical Modeling in Saturated and Unsaturated Conditions
Abstract Instability phenomena in waste landfills are not rare and the consequences are more severe than ones for typical landslide, having also environmental impact. Old waste dumps are often located in dried (or partially dried) valleys, natural...
2017 / Loretta Batali, Andreea Carastoian, Horatiu Popa, Gheorghe Pantel -
Hydraulic Device for Simulation of Pressure Shocks2014 / Stanislav Lindák, Radoslav Majdan, Ivan Janoško, Miroslav Pap, Mário Szabó
-
Estimation of bearing capacity of floating group of stone columns
Abstract Stone column is one of the ground improvement techniques. This technique has a proven performance, short time schedule, durability, constructability and low costs. The stone column technique has been used as a method of reinforcement of...
2017 / Mohammed Y. Fattah, Mohammed A. Al-Neami, Ahmed Shamel Al-Suhaily