Civil engineering topic list of research papers
-
Sulphuric Acid Resistant of Self Compacted Geopolymer Concrete Containing Slag and Ceramic Waste2017 / I. Shafiq, M. Azreen, M.W. Hussin
-
The Enhanced Spline-Method for Numerical Results of Natural Frequencies of Beams
Abstract There are many cases in engineering practice when it is necessary to know values close to exact for natural modes of beam and framing vibrations. This paper devoted to enhance the accuracy of calculations of natural frequencies of a beam,...
2017 / V.S. Zhernakov, V.P. Pavlov, V.M. Kudoyarova -
Exploratory study on bitumen content determination for foamed bitumen mixes based on porosity and indirect tensile strength
Abstract Optimum bitumen content determination is one of the major aims for foamed bitumen mix design. However, mix design procedures for foamed bitumen mixes are still under development. In this paper a method to determine the optimum bitumen...
2017 / May Namutebi, Björn Birgisson, Alvaro Guarin, Denis Jelagin -
The Influence of Salt Water on Chloride Penetration in Geopolymer Concrete2017 / Like Novia Halim, Januarti Jaya Ekaputri, Triwulan
-
A Comparative Study of Urban Road Traffic Simulators2016 / Mustapha Saidallah, Abdeslam El Fergougui, Abdelbaki Elbelrhiti Elalaoui
-
The impact of geometric non-linearities on the fatigue analysis of trailing edge bond lines in wind turbine rotor blades2016 / Pablo Noever Castelos, Claudio Balzani
-
Review in formulating the standard form of contract for Industrialized Building System (IBS) construction approach in Malaysia2016 / Mohd Ashraf Mohd Fateh, Mohammad Fadhil Mohammad, Ani Saifuza Abd Shukor
-
Evaluation of Factors that Affect Rutting Resistance of Asphalt mixes by Orthogonal Experiment Design
Abstract Rutting has been one of the major distresses observed on asphalt pavement in China, due to increasing traffic volume, heavy axle load, continuous hot weather, etc., especially in long-steep-slope section, bus stops, etc. Many factors would...
2017 / Guilian Zou, Jian Xu, Chung Wu -
Complex railway systems: capacity and utilisation of interconnected networks2016 / Rotoli Francesco, Malavasi Gabriele, Ricci Stefano
-
Presenting a Model Based on Fuzzy Application to Optimize the Time of IBS Projects in Gas Refineries2017 / Abbas Naderpour, Javad Majrouhi Sardroud, Masood Mofid
-
BIM application to building energy performance visualisation and management: Challenges and potential
Abstract This paper evaluates the potential for use of building information modelling (BIM) as a tool to support the visualisation and management of a building's performance; demonstrating a method for the capture, collation and linking of data...
2017 / Tristan Gerrish, Kirti Ruikar, Malcolm Cook, Mark Johnson, Mark Phillip, et al. -
The reliability control of the existing buildings2016 / Alexander Frolov, Irina Frolova, Olga Kotkova
-
Prediction of performance and evaluation of flexible pavement rehabilitation strategies
Abstract Five test sections with different additives and strategies were established to rehabilitate a State-maintained highway more effectively in Rhode Island (RI): control, calcium chloride, asphalt emulsion, Portland cement and geogrid....
2017 / Kang-Won Wayne Lee, Kathleen Wilson, Syed Amir Hassan -
Improving Efficiency of CCS Numerical Simulations Through Use of Parallel Processing2015 / K. Konopka, K. Miłkowska-Piszczek, L. Trębacz, J. Falkus
-
Global Safety Factor or Nonlinear Design of Concrete Structures2012 / Sz. Wolinski
-
Passive Downdraught Evaporative Cooling System Integration in Existing Residential Building Typologies: A Case Study
Abstract This paper analyses the integration of a passive downdraught evaporative cooling (PDEC) system in existing residential buildings through a case study, an existing 3-storey building located in a small city near Turin. This study was focused...
2017 / Giacomo Chiesa, Mario Grosso, Alessio Bogni, Giacomo Garavaglia -
Elastic Wave Propagation for Condition Assessment of Steel Bar Embedded in Mortar2015 / M. Rucka, B. Zima
-
FWFA Optimization based Decision Support System for Road Traffic Engineering2017 / D N Utama, F A Zaki, I J Munjeri, N U Putri
-
Intelligent Processing Methods Usage for Transport Systems Safety Improvement
Abstract The paper presents the usage of the intelligent processing methods in vehicles to increase an active safety without any interference with a driving process. We are taking into account three aspects. The main goal of the first one is...
2017 / Jacek Mazurkiewicz -
Factors influencing hysteresis characteristics of concrete dam deformation
Abstract Thermal deformation of a concrete dam changes periodically, and its variation lags behind the air temperature variation. The lag, known as the hysteresis time, is generally attributed to the low velocity of heat conduction in concrete, but...
2017 / Jia-he Zhang, Jian Wang, Li-sha Chai