Chemical engineering topic list of research papers
-
An eco-friendly way to fire retardant flexible polyurethane foam: layer-by-layer assembly of fully bio-based substances2014 / Xin Wang, Ye-Tang Pan, Jin-Tao Wan, De-Yi Wang
-
Modeling the effects of process conditions on the accumulated lethality values of thermally processed pickled carrots
Abstract Shelf-stable pickled products are thermally processed to ensure safety and stability. Carrots packed in glass jars and processed in a boiling water bath were chosen to construct models to predict accumulated lethality values given process...
2014 / Oscar G. Acosta, Françoise M. Vermeylen, Corinna Noel, Olga I. Padilla-Zakour -
Attrition of paracetamol and aspirin under bulk shear deformation
Abstract Particles are frequently exposed to shear stresses during manufacturing, which leads to breakage. This is particularly relevant to weak active pharmaceutical ingredients and is prevalent in pharmaceutical and food industries. The attrition...
2014 / C. Hare, M. Ghadiri -
Enhanced liquid–gas mixing due to pulsating injection
Abstract This paper considers the effects of intermittent injection of a liquid jet or spray on the initial break-up and mixing of one fluid with the surrounding ambient fluid. The aim of the analysis is to describe the physical process and indicate ...
2014 / H. Grosshans, R.-Z. Szász, L. Fuchs -
Feasibility Study of Indigenously Developed Fly Ash Membrane in Municipal Wastewater Treatment
Abstract Afly ash membrane developed by The Energy and Resources Institute (TERI), New Delhi was studied for its applicability in municipal wastewater treatment. In particular, the effect of aeration on preventing membrane fouling was studied. The...
2015 / Maneesh Namburath, Ganapati Joshi, Murali Cholemari, Chandrahas Shet, T.R. Sreekrishnan, et al. -
Packing Characterization for Post Combustion CO2 Capture: Mass Transfer Model Development
Abstract Three mass transfer properties: the effective area (ae), liquid film and gas film mass transfer coefficients (kL and kG) are measured consistently for eleven packings with different surface area and corrugation angle. The effective area and ...
2014 / Chao Wang, Micah Perry, Frank Seibert, Gary Rochelle -
Alstom's Regenerative Calcium Cycle - Norcem Derisking Study: Risk Mitigation in the Development of a 2nd Generation CCS Technology.
Abstract Alstom is a pioneer and industrial leader in the development of post combustion CCS technologies. Alstom's Regenerative Calcium Cycle (RCC) is a 2nd generation post combustion CCS technology utilizing a calcination/ carbonation loop to...
2014 / Michael C. Balfe, Ola Augustsson, Raul Tahoces-soto, Liv-Margrethe H. Bjerge -
Characterization of β -Glucosidase Produced by Aspergillus niger under Solid-State Fermentation and Partially Purified Using MANAE-Agarose2014 / Anderson Baraldo Junior, Diogo G. Borges, Paulo W. Tardioli, Cristiane S. Farinas
-
Nanoscale Zero-Valent Iron for Sulfide Removal from Digested Piggery Wastewater2014 / Sheng-Hsun Chaung, Pei-Fung Wu, Yu-Lin Kao, Weile Yan, Hsing-Lung Lien
-
Characterization of hydromechanical stress in aerated stirred tanks up to 40 m3 scale by measurement of maximum stable drop size2014 / Andreas Daub, Marina Böhm, Stefanie Delueg, Markus Mühlmann, Gerhard Schneider, et al.
-
Effect of mechanical disruption on the effectiveness of three reactors used for dilute acid pretreatment of corn stover Part 2: morphological and structural substrate analysis2014 / Peter N Ciesielski, Wei Wang, Xiaowen Chen, Todd B Vinzant, Melvin P Tucker, et al.
-
Double-averaged velocity and stress distributions for hydraulically-smooth and transitionally-rough turbulent flows2008 / Stuart Cameron, Vladimir Nikora, Stephen Coleman
-
Flow analysis in a channel with flexible vegetation using double-averaging method2008 / Maurizio Righetti
-
The mechanisms of hydrothermal deconstruction of lignocellulose: New insights from thermal–analytical and complementary studies
Abstract Differential Scanning Calorimetry, Dynamic Mechanical Thermal Analysis, gravimetric and chemical techniques have been used to study hydrothermal reactions of straw biomass. Exothermic degradation initiates above 195°C, due to breakdown of...
2011 / Roger Ibbett, Sanyasi Gaddipati, Scott Davies, Sandra Hill, Greg Tucker -
Dynamic Simulation of Carbonate Fuel Cell-Gas Turbine Hybrid Systems2006 / Rory A. Roberts, Jack Brouwer, Eric Liese, Randall S. Gemmen
-
Ammonia as hydrogen carrier for transportation; investigation of the ammonia exhaust gas fuel reforming
Abstract In this paper we show, for the first time, the feasibility of ammonia exhaust gas reforming as a strategy for hydrogen production used in transportation. The application of the reforming process and the impact of the product on diesel...
2013 / Wentao Wang, José M. Herreros, Athanasios Tsolakis, Andrew P.E. York -
Effect of Modified Starches on Rheological Properties of Ketchup2012 / Lesław Juszczak, Zbigniew Oczadły, Dorota Gałkowska
-
Pore-Scale Micro-CT Imaging: Cluster Size Distribution During Drainage and Imbibition
Abstract In the present study we investigate the size and volume distribution of n-decane clusters in a brine saturated porous glass sample by means of micro-CT imaging with pore-scale resolution. Cluster size distribution functions and cluster...
2012 / A. Georgiadis, S. Berg, G. Maitland, H. Ott -
Unraveling the Geometry Dependence of In-Nozzle Cavitation in High-Pressure Injectors2013 / Kyoung-Su Im, Seong-Kyun Cheong, Christopher F. Powell, Ming-chia D. Lai, Jin Wang
-
Numerical Simulation of a Low-Power Hydrazine Arcjet Thruster
Abstract A modeling study is conducted to investigate the plasma flow and heat transfer characteristics of low-power (kW class) archeated thrusters (arcjets) with 2:1 hydrogen/nitrogen to simulate decomposed hydrazine as the propellant. The...
2012 / Hai-Xing Wang, Jin-Yue Geng, Xi Chen, Wenxia Pan