Chemical engineering topic list of research papers
-
Transport Mechanisms for CO2-CH4 Exchange and Safe CO2 Storage in Hydrate-Bearing Sandstone2015 / Knut Birkedal, Lars Hauge, Arne Graue, Geir Ersland
-
Comparison of Different Biomass Pretreatment Techniques and Their Impact on Chemistry and Structure2015 / Seema Singh, Gang Cheng, Noppadon Sathitsuksanoh, Dong Wu, Patanjali Varanasi, et al.
-
Recovery of Gold and Silver and Removal of Copper, Zinc and Lead Ions in Pregnant and Barren Cyanide Solutions2015 / Gabriela Figueroa, Jesus L. Valenzuela, Jose R. Parga, Victor Vazquez, Alejandro Valenzuela
-
Unsteady natural convection in micropolar nanofluids2015 / Kazimierz Rup, Konrad Nering
-
Optimal design and operation of a UASB reactor for dairy cattle manure
Abstract Optimal design and operation of a planned full-scale UASB reactor at a dairy farm are determined using optimization algorithms based on steady state simulations of a dynamic AD process model combined with models of the reactor temperature...
2015 / F. Haugen, R. Bakke, B. Lie, J. Hovland, K. Vasdal -
Review and benchmarking of process models for batch screening based on discrete element simulations
Abstract In the recent past detailed particle-based simulation approaches such as the discrete element method (DEM) have become popular in addition to phenomenological models for the design and optimization of operating parameters of screening...
2014 / Frederik Elskamp, Harald Kruggel-Emden -
Development of Partial Oxy-combustion Technology: New Solvents Applied to CO2 Capture in Fossil-fuels Power Plants
Abstract Carbon Capture and Storage Technologies (CCS) applied to fossil-fuels power plants have shown some issues that has not been solved yet. Post-combustion using amine-based chemical absorption is a mature and industrially developed technology...
2014 / Fernando Vega, Benito Navarrete, Mercedes Cano, Esmeralda Portillo -
Parametric study on the regeneration heat requirement of an amine-based solid adsorbent process for post-combustion carbon capture
Abstract The thermal energy required for regeneration of CO2-rich adsorbents or absorbents is usually regarded as the most important criterion to evaluate different materials and processes for application in commercial-scale CO2 capture systems. It...
2016 / Wenbin Zhang, Hao Liu, Yuan Sun, Janis Cakstins, Chenggong Sun, et al. -
Experimental and Theoretical Study of Minimum Fluidization Velocity and Void Fraction of a Limestone Based CO2 Sorbent
Abstract Calcium looping is a promising technology for CO2 capture as it may reduce considerably the energy penalty represented by the capture system. The CO2 capture efficiency will strongly depend on the reactor configuration, solids residence...
2014 / Chameera K. Jayarathna, Britt M. Halvorsen, Lars-Andre Tokheim -
Positron Emission Particle Tracking (PEPT) for the analysis of water motion in a domestic dishwasher
Abstract Motion of water inside a household dishwasher has been characterised via Positron Emission Particle Tracking (PEPT). The technique enables the visualisation of the motion of a radioactive tracer in three-dimensional and opaque systems....
2014 / R. Pérez-Mohedano, N. Letzelter, C. Amador, C.T. VanderRoest, S. Bakalis -
Evaluation of Microporous Biochars Produced by Single-step Oxidation for Postcombustion CO2 Capture under Humid Conditions
Abstract Water vapor is the third component of flue gases after N2 and CO2. The permanent dipole moment of the water molecule makes it strongly adsorbable on many adsorbents, which can negatively affect the adsorption capacity of carbon dioxide...
2014 / M.G. Plaza, A.S. González, F. Rubiera, C. Pevida -
Bio-oil from Fast Pyrolysis of Empty Fruit Bunch at Various Temperature
Abstract World concern about depletion of fossil fuel and energy security supply has driven into increasing awareness about biomass derived energy. Empty fruit bunch (EFB), one of the major palm oil-derived biomass available in Indonesia, is a...
2015 / Kiky C. Sembiring, Nino Rinaldi, Sabar P. Simanungkalit -
Development of a 3D printer using scanning projection stereolithography2015 / Michael P. Lee, Geoffrey J. T. Cooper, Trevor Hinkley, Graham M. Gibson, Miles J. Padgett, et al.
-
Screening of Bacillus coagulans strains in lignin supplemented minimal medium with high throughput turbidity measurements
Abstract The aim of this study was to extend the options for screening and characterization of microorganism through kinetic growth parameters. In order to obtain data, automated turbidimetric measurements were accomplished to observe the response...
2014 / Robert Glaser, Joachim Venus -
CFD Simulation of the Discharge Flow from Standard Rushton Impeller2014 / Bohuš Kysela, Jiří Konfršt, Ivan Fořt, Zdeněk Chára
-
Dual solutions for unsteady mixed convection flow of MHD micropolar fluid over a stretching/shrinking sheet with non-uniform heat source/sink
Abstract The aim of the present study is to investigate the influence of non-uniform heat source/sink, mass transfer and chemical reaction on an unsteady mixed convection boundary layer flow of a magneto-micropolar fluid past a stretching/shrinking...
2015 / N. Sandeep, C. Sulochana -
Two-Dimensional Simulation of Electrospun Nanofibrous Structures: Connection of Experimental and Simulated Results2014 / Panu Danwanichakul, Duangkamol Danwanichakul
-
Mixing Rules Formulation for a Kinetic Model of the Langmuir-Hinshelwood Semipredictive Type Applied to the Heterogeneous Photocatalytic Degradation of Multicomponent Mixtures2014 / John Wilman Rodriguez-Acosta, Miguel Ángel Mueses, Fiderman Machuca-Martínez
-
The Cooperative Effect of In2O2 and In/HZSM-5 for Reduction of Nitric Oxide with Methane2014 / Lili Ren
-
Indicator pathogens, organic matter and LAS detergent removal from wastewater by constructed subsurface wetlands2014 / Behrooz Karimi, Mohammad Ehrampoush, Hossin Jabary