Chemical engineering topic list of research papers
-
Crystallization Diagram for Antisolvent Crystallization of Lactose: Using Design of Experiments To Investigate Continuous Mixing-Induced Supersaturation2017 / Pól MacFhionnghaile, Vaclav Svoboda, John McGinty, Alison Nordon, Jan Sefcik
-
Surface Barriers as Dominant Mechanism to Transport Limitations in Hierarchically Structured Catalysts – Application to the Zeolite-Catalyzed Alkylation of Benzene with Ethylene
Abstract The meso-macropore network of a hierarchically structured zeolite catalyst is numerically optimized to maximize the volume-integrated reaction yield in the ethylation of benzene to produce ethylbenzene over zeolite H-ZSM-5. A hierarchical...
2017 / Sanjeev M. Rao, Erisa Saraçi, Roger Gläser, Marc-Olivier Coppens -
Testing of an Innovative Installation for Alternative Fuel Low-temperature Gasification Prior to Co-firing in Power Boilers
Abstract The paper presents results of the investigation of an innovative biomass and alternative fuel low-temperature gasification method before co-firing in industrial or power plant boilers. Gasification process takes place with use of flue gas...
2017 / Piotr Ostrowski, Izabella Maj, Sylwester Kalisz, Michał Polok -
Three-dimensional numerical simulations of magnetohydrodynamic flow around a confined circular cylinder under low, moderate, and strong magnetic fields2013 / Nicolas Kanaris, Xavier Albets, Dimokratis Grigoriadis, Stavros Kassinos
-
Process cost and facility considerations in the selection of primary cell culture clarification technology2013 / Michael Felo, Brandon Christensen, John Higgins
-
Numerical predictions of turbulent underexpanded sonic jets using a pressure-based methodology2002 / P Birkby, G J Page
-
The effect of water treeing on the electric field distribution of XLPE. Consequences for the dielectric strength2002 / I. Radu, M. Acedo, J.C. Filippini, P. Notingher, F. Ftutos
-
Linear stability analysis and numerical simulation of miscible two-layer channel flow2009 / K. C. Sahu, H. Ding, P. Valluri, O. K. Matar
-
Precipitation of Hemicelluloses from DMSO/Water Mixtures Using Carbon Dioxide as an Antisolvent2009 / Emmerich Haimer, Martin Wendland, Antje Potthast, Thomas Rosenau, Falk Liebner
-
Effect of reaction variables on CO methanation process over NiO–La2O3–MgO/Al2O3 catalyst for coal to synthetic natural gas2015 / Zhong He, Xiaolong Wang, Shiwang Gao, Tiancun Xiao
-
Swelling and hydration studies on egg yolk samples via scanning fluid dynamic gauge and gravimetric tests
Abstract Hydration and swelling in initially dry protein-based samples represent the first stage in their cleaning from hard surfaces. These phenomena have been studied in technical egg yolk stains via scanning Fluid Dynamic Gauge (sFDG) and...
2015 / R. Pérez-Mohedano, N. Letzelter, S. Bakalis -
Validation of a Dynamic Model of the Brindisi Pilot Plant
Abstract In this work, a dynamic model of the Brindisi CO2 capture pilot plant is implemented in K-spice general simulation tool. The model is used to simulate relevant step changes performed during a pilot plant campaign conducted in the EU project ...
2014 / Nina Enaasen, Luigi Zangrilli, Angela Mangiaracina, Thor Mejdell, Hanne M. Kvamsdal, et al. -
Simulation and optimization of airlift external circulation membrane bioreactor using computational fluid dynamics2014 / Zhang Qing, Xu Rongle, Zheng Xiang, Fan Yaobo
-
Shear rheology and filament stretching behaviour of xanthan gum and carboxymethyl cellulose solution in presence of saliva
Abstract The objective of the work reported in this paper is to determine if saliva addition has an effect on the rheology of xanthan gum solutions. The reasons for the interest was that it has been previously reported that flavour release from high ...
2014 / Hyejung Choi, John R. Mitchell, Sanyasi R. Gaddipati, Sandra E. Hill, Bettina Wolf -
Dynamic Modeling and Validation of Post-combustion CO2 Capture Plants in Australian Coal-fired Power Stations
Abstract Flexible operation of post-combustion CO2 capture (PCC) plants can improve efficiency through coordinating the balance between consumer demands for electricity and CO2 emission reductions. This strategy however, will impose process...
2013 / Mai Bui, Indra Gunawan, Vincent Verheyen, Yuli Artanto, Erik Meuleman, et al. -
Costs and Potential of Carbon Capture and Storage at an Integrated Steel Mill
Abstract In this study different possibilities and the feasibility of applying carbon capture at an integrated steel mill based on blast furnace process, in order to reduce carbon dioxide emissions were studied. Technologies considered for capturing ...
2013 / Antti Arasto, Eemeli Tsupari, Janne Kärki, Miika Sihvonen, Jarmo Lilja -
Optimization of CO2 concentration captured by membrane technology - Possibility of reduction in CO2 capture energy and cost -
Abstract The influence of specific power requirements and the membrane area on the CO2 recovery ratio and the CO2 concentration is investigated for CO2 membrane separation from a pressurized gas stream. Three different membrane configurations of a...
2013 / Shingo Kazama, Kenji Haraya -
The Effects of Membrane-based CO2 Capture System on Pulverized Coal Power Plant Performance and Cost
Abstract Membrane systems are under development for cost-effective carbon dioxide (CO2) capture. This study is to investigate the effects of adding CO2-selective polymeric membrane systems to coal-fired power plants using newly developed performance ...
2013 / Haibo Zhai, Edward S. Rubin -
Elevated Pressure CO2 Adsorption Characteristics of K-promoted Hydrotalcites for Pre-combustion Carbon Capture
Abstract Potassium carbonate promoted hydrotalcites are one of the most promising CO2 adsorbents working at elevated temperature and pressure. But they suffer from imperfect CO2 capacity in the temperature range from 250-400, atmospheric pressure....
2013 / Shuang Li, Yixiang Shi, Yi Yang, Ningsheng Cai -
Mixed convection in thermally anisotropic non-Darcy porous medium in double lid-driven cavity using Bejan’s heatlines
Abstract This paper discusses the problem of mixed convection in two-sided lid-driven enclosures saturated non-Darcy porous medium. The vertical walls of the cavity were kept thermally insulated. The bottom wall is cooled while the top wall is...
2015 / Sameh E. Ahmed