Chemical engineering topic list of research papers
-
Furfural Production from Oil Palm Biomass Using a Biomass-derived Supercritical Ethanol Solvent and Formic Acid Catalyst
Abstract This research aimed to produce furfural from oil palm biomass via a biomass-derived solvent (supercritical ethanol) and catalyst (formic acid). The process is 100% biomass-based without the addition of any synthetic chemicals. Ethanol can...
2016 / Tau Len-Kelly Yong, Nurabiyiah Mohamad, Nor Nadiah Mohamad Yusof -
Ageing behaviour of polyacrylamide-based excavation fluids2015 / Carlos Lam, Stephan A. Jefferis
-
Point-Particle DNS and LES of Particle-Laden Turbulent flow - a state-of-the-art review2016 / J. G. M. Kuerten
-
Real-time monitoring of proton exchange membrane fuel cell stack failure2016 / Billy Wu, Michael A. Parkes, Luca de Benedetti, Andrew J. Marquis, Gregory J. Offer, et al.
-
The Effect Of Sodium Alginate Concentration On The Rheological Parameters Of Spinning Solutions2015 / Magdalena Brzezińska, Grzegorz Szparaga
-
Modelling polycarbonate synthesis rates on the example of bulk heteropolyaddition of diphenyl carbonate and bisphenol A diglycidyl ether2016 / Andrzej Gawdzik, Anna Mederska, Tadeusz Mederski
-
Experimental Study on the Impact of NaCl Concentration on the Flocculating Settling of Fine Sediment in Static Water
Abstract NaCl concentration can increase the flocculation of the fine-grained sediments in suspension. However, the impact of NaCl concentration on the process of flocculation and settling is unclear. This paper investigated the effect of NaCl...
2016 / Yangming Ou, Ran Li, Ruifeng Liang -
The Concept of Coal Burning in a Cyclone Furnace
Abstract The paper presents a concept of a new cyclone furnace for combustion of solid fuel under conditions of oxy-fuel combustion, which was used in the past in cyclone combustion chambers. The principal factors and determinants of operation and...
2016 / Robert Zarzycki, Zbigniew Bis, Rafał Kobyłecki -
Numerical study on mixed convection heat transfer in a porous L-shaped cavity
Abstract A lid-driven L-shaped cavity filled with a porous medium is analyzed. The Galerkin weighted residual method is applied to obtain numerical solutions. The effect of the Reynolds number (Re =1–100), Grashof number (Gr ...
2016 / Satyajit Mojumder, Sourav Saha, M. Rizwanur Rahman, M.M. Rahman, Khan Md. Rabbi, et al. -
Preparation of fluidized catalytic cracking slurry oil-in-water emulsion as anti-collapse agent for drilling fluids
Abstract Fluidized catalytic cracking slurry oil-in-water emulsion (FCCSE) was prepared by using interfacial complexes generation method that was simple and versatile. The critical factors influencing the sample preparation process were optimized,...
2016 / Zhengqiang Xiong, Shixian Tao, Xiaodong Li, Fan Fu, Yanning Li -
Effects of material thickness and processing method on poly(lactic-co-glycolic acid) degradation and mechanical performance2016 / Reyhaneh Neghabat Shirazi, Fawaz Aldabbagh, William Ronan, Andrea Erxleben, Yury Rochev, et al.
-
Mass transport properties of mature wasteform grouts2007 / H. S. Wong, N. R. Buenfeld, J. Hill, A. W. Harris
-
In-situ Biomethane Enrichment by Recirculation of Biogas Channel Digester Effluent Using Gas Stripping Column
Abstract This study was conducted to examine the in-situ methane enrichment in a biogas system by continuously stripping carbon dioxide from the effluent and recirculating back to the system. A laboratory-scale biogas digester with 1,000-liter...
2016 / Supreeya Boontawee, Sirichai Koonaphapdeelert -
The Effect of Air Injection Rate and Medium Nitrogen Concentration on Cell Biomass and Lipid Content of Scenedesmus Quadricauda in Flat Plate Photobioreactor
Abstract In the present study, the microalgal strain Scenedesmus quadricauda was studied in different air injection rates and different medium nitrogen concentrations of Lefebvre-czarda medium by using a flat plate photobioreactor. The result showed ...
2016 / Nguyen Tien Thanh, Yoshimitsu Uemura, Vijendren Krishnan, Lukman Ismail -
Multi response optimization for enhanced xylitol production by Debaryomyces nepalensis in bioreactor2016 / J. Sharon Mano Pappu, Sathyanarayana N. Gummadi
-
Shock Mach number influence on reaction wave types and mixing in reactive shock–bubble interaction
Abstract We present numerical simulations for a reactive shock–bubble interaction with detailed chemistry. The convex shape of the bubble leads to shock focusing, which generates spots of high pressure and temperature. Pressure and temperature...
2016 / Felix Diegelmann, Stefan Hickel, Nikolaus A. Adams -
A design procedure for “liquid to air” type atomisers based on air and water mixture outflow velocity2015 / Piotr Krawczyk, Krzysztof Badyda
-
Hybrid SSF/SHF Processing of SO2 Pretreated Wheat Straw—Tuning Co-fermentation by Yeast Inoculum Size and Hydrolysis Time2016 / B. Cassells, K. Karhumaa, V. Sànchez i Nogué, G. Lidén
-
Determination Of The Maximum Explosion Pressure And The Maximum Rate Of Pressure Rise During Explosion Of Wood Dust Clouds2015 / Richard Kuracina, Zuzana Szabová, Pavol Čekan
-
Impact of Complex Layering Structures of Organic and Inorganic Foulants on the Thermohydraulic Performance of a Single Heat Exchanger Tube: A Simulation Study2016 / E. Diaz-Bejarano, F. Coletti, S. Macchietto