Chemical engineering topic list of research papers
-
Sustainable process for the production of methanol from CO2 and H2 using Cu/ZnO-based multicomponent catalyst
Abstract We have performed R&D project on methanol synthesis from CO2 and hydrogen in order to contribute to CO2 mitigation. High-performance Cu/ZnO based multicomponent catalysts were developed. The roles of metal oxides contained in...
2010 / J. Toyir, R. Miloua, N.E. Elkadri, M. Nawdali, H. Toufik, et al. -
Experiments and Modelling of Liquid–liquid Equilibria in the Mineral Oil + N,N-dimethylformamide System
Abstract Description of phase behaviour of a highly nonideal system mineral oil + DMF is a rather complex task, because hydrocarbon feed, which has to be separated into aromatic and nonaromatic fractions, consists of large number of compounds that...
2012 / Z. Sedláková, A. Andresová, L. Morávková, G. Bogdanić -
Intensification of Biobutanol Production in Batch Oscillatory Baffled Bioreactor
Abstract Biobutanol is a high value biofuel and potentially a better fuel extender than ethanol. The market demand is expected to increase dramatically, if biobutanol can be produced economically via the ABE (acetone, butanol ethanol) fermentation....
2012 / N. Masngut, A.P. Harvey -
Dynamic Modelling for a Trickle-Bed Reactor Using the Numerical Inverse Laplace Transform Technique
Abstract Experimental evaluation and dynamic modelling were presented for the transient behavior of a trickle bed reactor in which gas and liquid streams flow downwards through a bed of catalyst particles. One-dimensional dynamic mathematical model...
2012 / J.D. Silva -
Foaming behavior of Ti6Al4V particle-added aluminum powder compacts2008 / N. D. Karsu, S. Yüksel, M. Güden
-
Performance of AFEX™ pretreated rice straw as source of fermentable sugars: the influence of particle size2013 / Shuhaida Harun, Venkatesh Balan, Mohd Sobri Takriff, Osman Hassan, Jamaliah Jahim, et al.
-
Determination of the location of coke in catalysts by a novel NMR-based, liquid-porosimetry approach
Abstract In this work, a new technique, suitable for chemically-heterogeneous materials, has been used to characterise the structural properties of porous heterogeneous catalysts. A liquid–liquid exchange (LLE) process within nanoporous catalysts...
2012 / Navin Gopinathan, Malcolm Greaves, John P. Lowe, Joseph Wood, Sean P. Rigby -
Scale-up Study of Agglomeration During Oxalic Precipitation in Nuclear Industry
Abstract The aim of this paper is to study the scale-up effects on agglomeration mechanisms during the precipitation of actinide and lanthanide oxalate in continuous MSMPR (Mixed Solution Mixed Product Removal) crystallizers in order to determine...
2012 / Sophie Lalleman, Murielle Bertrand, Jean-Philippe Gaillard, Edouard Plasari -
Curvature and Velocity of Methane-Air Bunsen Flame Tips2011 / G. García-Soriano, P. L. García-Ybarra, F. J. Higuera
-
Techno-economic evaluation of 2nd generation bioethanol production from sugar cane bagasse and leaves integrated with the sugar-based ethanol process2012 / Stefano Macrelli, Johan Mogensen, Guido Zacchi
-
Modelling Strategies of Membrane Contactor Processes for CO2 POST-Combustion Capture: A Critical Reassessment2012 / E. Chabanon, D. Roizard, E. Favre
-
UT/SRP CO2 capture pilot plant — Operating experience and procedures
Abstract The Separations Research Program (SRP) pilot plant is located at The University of Texas (UT) Pickle Research Campus and has been operated as a carbon capture facility since 2002. The semi-works scale pilot facility uses air and 3–14 mol%...
2011 / F. Seibert, E. Chen, M. Perry, S. Briggs, R. Montgomery, et al. -
Study on carbamate stability in the Amp/CO2/H2O system from 13C-NMR spectroscopy
Abstract Qualitative and quantitative 13C NMR studies were performed on 30 wt % aqueous solution of 2-amino-2-methyl-1-propanol (AMP) with different amount of CO2 at 25 °C. The results suggested that the main species in this system are: AMP/AMPH+,...
2011 / Arlinda F. Ciftja, Ardi Hartono, Eirik F. da Silva, Hallvard F. Svendsen -
Comparative study of optimized purge flow in a CO2 capture system using different sorbents
Abstract One of the most promising options for CO2 capture in large power generation facilities is the system based on the CO2 sorption loop. This method has gained rapid importance due to promising carbonator CO2 capture efficiency, the existence...
2009 / Yolanda Lara, Pilar Lisbona, Ana Martínez, Luis M. Romeo -
Chlorophyll Extraction from Microalgae: A Review on the Process Engineering Aspects2010 / Aris Hosikian, Su Lim, Ronald Halim, Michael K. Danquah
-
Characterization of the bubble cluster and velocity field in the focal region of a lithotripter2007 / J M Buick, J A Cosgrove, H Eizenhöfer, R Higham, R Royles
-
Production of Ligninolytic Enzymes by White-Rot Fungus Datronia sp. KAPI0039 and Their Application for Reactive Dye Removal2010 / Pilanee Vaithanomsat, Waraporn Apiwatanapiwat, Oncheera Petchoy, Jirawate Chedchant
-
Vegetable-Oil-Based Hyperbranched Polyester-Styrene Copolymer Containing Silver Nanoparticle as Antimicrobial and Corrosion-Resistant Coating Materials2013 / Manawwer Alam, Mohammed Rafi Shaik, Naser M. Alandis
-
Enzymatic Synthesis of Ampicillin: Nonlinear Modeling, Kinetics Estimation, and Adaptive Control2012 / Monica Roman, Dan Selişteanu
-
Calcium Phosphate Bone Cements Including Sugar Surfactants: Part One—Porosity, Setting Times and Compressive Strength2010 / Ariane Bercier, Stéphane Gonçalves, Olivier Lignon, Juliette Fitremann