Chemical engineering topic list of research papers
-
Mixed convection from a discrete heat source in enclosures with two adjacent moving walls and filled with micropolar nanofluids
Abstract This paper examines numerically the thermal and flow field characteristics of the laminar steady mixed convection flow in a square lid-driven enclosure filled with water-based micropolar nanofluids by using the finite volume method. While a ...
2015 / Sameh E. Ahmed, M.A. Mansour, Ahmed Kadhim Hussein, S. Sivasankaran -
Laminar mixing in a SMX static mixer evaluated by positron emission particle tracking (PEPT) and magnetic resonance imaging (MRI)
Abstract Static mixers are implemented across many industries and are used for mixing, heating and reacting processes. This paper reports the combined use of positron emission particle tracking (PEPT) and magnetic resonance imaging (MRI) to assess...
2015 / Olga Mihailova, Victor Lim, Michael J. McCarthy, Kathryn L. McCarthy, Serafim Bakalis -
Evaluation of amine emissions from the post-combustion CO2 capture pilot plant
Abstract In this work, we evaluated amine emissions from 10ton-CO2/day scale pilot plant in Mikawa Power Plant of Sigma Power Co. Ltd. within TS-1 solvent. Firstly, we investigated that how sampling gas flow rate affects measured value of amine...
2013 / Koshito Fujita, Daigo Muraoka, Takashi Ogawa, Hideo Kitamura, Kensuke Suzuki, et al. -
Implementing Treatment Sequences to Promote Reduction of DBPs in Small Drinking Water Systems2014 / C. M. Roberts, E. C. Inniss
-
The Advances of Post-combustion CO2 Capture with Chemical Solvents: Review and Guidelines
Abstract Carbon dioxide is the major greenhouse gas that contributes to the global warming more than 60%. Carbon dioxide from power plants is one of the main sources. Therefore it is essential to reduce the CO2 emission from power plant flue gas....
2014 / Xiaomei Wu, Yunsong Yu, Zhen Qin, Zaoxiao Zhang -
Development of an Energy-efficient CO2 Capture Process Using Thermomorphic Biphasic Solvents
Abstract A novel CO2 capture system using thermomorphic biphasic solvent (TBS) has been studied in this work. It exhibits a thermal-induced liquid-liquid phase separation (LLPS) behaviour, which intensifies CO2 desorption at temperature of 80°C and...
2013 / Jiafei Zhang, Yu Qiao, Wanzhong Wang, Robert Misch, Khuram Hussain, et al. -
Experimental Investigation of CO2 Outflow from a High-pressure Reservoir
Abstract An experimental investigation has been conducted to study the discharge of liquid CO2 from a pressurized vessel. Controlled release tests with different initial vessel pressures have been carried out. This paper focuses mainly on the high...
2013 / Mohammad Ahmad, Luuk Buit, Onno Florisson, Corina Hulsbosch-Dam, Marlies Bögemann-van Osch, et al. -
Estimation of Mass Transfer Coefficient of Contaminant Migration across CO2 - Brine Interface in CO2 Geological Sequestration
Abstract Injection of CO2 into subsurface formations is one of key technologies for reducing greenhouse gas emissions. However, the injected CO2 could cause migration of subsurface substances, volatile organic contaminants, for example, which may...
2013 / Yong Yang, Yongzhong Liu, Xiaohong Yan -
Evaluation of resisdence time measurements on heat exchangers for the determination of dispersive Peclet numbers2014 / Wilfried Roetzel, Chakkrit Na Ranong
-
Mesophilic versus thermophilic anaerobic digestion of cattle manure: methane productivity and microbial ecology2015 / Veronica Moset, Morten Poulsen, Radziah Wahid, Ole Højberg, Henrik Bjarne Møller
-
Wireless Displacement Sensing Enabled by Metamaterial Probes for Remote Structural Health Monitoring2014 / Burak Ozbey, Emre Unal, Hatice Ertugrul, Ozgur Kurc, Christian Puttlitz, et al.
-
Enhancing Aerodynamic Performances of Highly Loaded Compressor Cascades via Air Injection
Abstract This article experimentally studies the effects of air injection near the blade trailing edge on flow separation and losses in a highly loaded linear compressor cascade. Aerodynamic parameters of eight cascades with different air injection...
2009 / Dongmin Feng, Fu Chen, Yanping Song, Huanlong Chen, Zhongqi Wang -
Combined Deacetylation and PFI Refining Pretreatment of Corn Cob for the Improvement of a Two-Stage Enzymatic Hydrolysis2014 / Yuedong Zhang, Xindong Mu, Haisong Wang, Bin Li, Hui Peng
-
Optimal Pipeline Design with Increasing CO2 Flow Rates
Abstract Wide deployment of carbon capture and storage (CCS) will require extensive transportation infrastructure, quite often in the form of pipelines. The rollout of such large-scale infrastructure would undoubtedly require very large investments. ...
2013 / Z. Wang, G.I. Cardenas, G.A. Fimbres Weihs, D.E. Wiley -
Effect of glass composition on the interactions between structural elements in Cu-containing silicate–phosphate glasses2014 / J. Sułowska, I. Wacławska, Z. Olejniczak
-
Production of Bioethanol in a Second Generation Prototype from Pine Wood Chips
Abstract This paper deals with the production of bioethanol from ligno-cellulosic biomass, in particular a softwood biomass from forestry sector is tested: pine wood chip is a residual biomass obtained from coppice maintenance with a very...
2014 / Franco Cotana, Gianluca Cavalaglio, Mattia Gelosia, Andrea Nicolini, Valentina Coccia, et al. -
Comparative Assessment of Gasification Based Coal Power Plants with Various CO 2 Capture Technologies Producing Electricity and Hydrogen2014 / Sanjay Mukherjee, Prashant Kumar, Ali Hosseini, Aidong Yang, Paul Fennell
-
Modeling of Proton-Conducting Solid Oxide Fuel Cells Fueled with Syngas2014 / Meng Ni, Zongping Shao, Kwong Chan
-
An experimental investigation of the swirling flow in a tall-form counter current spray dryer
Abstract This work studies the air flow in a large swirl counter-current dryer using sonic anemometry. Air velocity and turbulence fields are reported at isothermal conditions and in the absence of particles. In a tall-form unit the structure of the ...
2015 / Victor Francia, Luis Martin, Andrew E. Bayly, Mark J.H. Simmons -
Experimental Investigation of Continuous Fluidized Bed Spray Granulation with Internal Classification
Abstract Free flowing and dust free granules with defined properties can be produced from solid-containing liquids like suspensions, solutions or melts by means of fluidized bed spray granulation. In the presented work, granules are produced from a...
2015 / Martin Schmidt, Torsten Hoffmann, Andreas Bück, Evangelos Tsotsas