Chemical engineering topic list of research papers
-
Performance Modeling and Cost Analysis of a Pilot-Scale Reverse Osmosis Process for the Final Purification of Olive Mill Wastewater2013 / Javier Ochando-Pulido, Maria Victor-Ortega, Antonio Martinez-Ferez
-
Combined Molecular Algorithms for the Generation, Equilibration and Topological Analysis of Entangled Polymers: Methodology and Performance2009 / Nikos Ch. Karayiannis, Martin Kröger
-
The Effect of Transition Metal Doping on the Photooxidation Process of Titania-Clay Composites2008 / Judit Ménesi, Renáta Kékesi, László Kőrösi, Volker Zöllmer, André Richardt, et al.
-
Ion-Exchange Membranes Based on Polynorbornenes with Fluorinated Imide Side Chain Groups2012 / Arlette A. Santiago, Joel Vargas, Mikhail A. Tlenkopatchev, Mar López-González, Evaristo Riande
-
Solar Photocatalytic Degradation of Bisphenol A on Immobilized ZnO or TiO22013 / Andreas Zacharakis, Efthalia Chatzisymeon, Vassilios Binas, Zacharias Frontistis, Danae Venieri, et al.
-
The Effect of Polymer Content on the Non-Newtonian Behavior of Acetaminophen Suspension2013 / Eskandar Moghimipour, Maryam Kouchak, Anayatollah Salimi, Saeed Bahrampour, Somayeh Handali
-
A Probabilistic Approach for Predicting Average Slug Frequency in Horizontal Gas/Liquid Pipe Flow2013 / U. Kadri
-
Investigation of concentrating and nonconcentrating evacuated tube solar water heaters using 2D particle imaging velocimetry2014 / David A.G. Redpath, Philip Dalzell, Philip W. Griffiths, Neil J. Hewitt
-
On Global Linear Instability Mechanisms of Flow Around Airfoils at Low Reynolds Number and High Angle of Attack
Abstract The existence of modal and non-modal linear three-dimensional global instabilities of spanwise-homogeneous low-Reynolds number laminar incompressible flow around two-dimensional airfoils is documented. Work has commenced to examine the...
2015 / Rafael S. Gioria, Wei He, Vassilis Theofilis -
Transformation mechanism of magnetite nanoparticles2015 / Umar Saeed Khan, Amanullah, Abdul Manan, Nasrullah Khan, Amir Mahmood, et al.
-
Modification of Centrifugal Impeller and Effect of Impeller Extended Shrouds on Centrifugal Compressor Performance
Abstract Efficient, compact centrifugal compressors with higher pressure ratios along with adequate surge margins are required for the future. Achieving these necessitates development of newer non-conventional diffuser designs and rotating vaneless...
2013 / S. Seralathan, D.G. Roy Chowdhury -
Effect of different pretreatments on egyptian sugar-cane bagasse saccharification and bioethanol production
Abstract Sugar-cane processing generates large amount of bagasse. Disposal of bagasse is critical for both agricultural profitability and environmental protection. Sugar-cane bagasse is a renewable resource that can be used to produce ethanol. ...
2013 / Mervate A. Abo-State, Ahmed M.E. Ragab, Nour Sh. EL-Gendy, Laila A. Farahat, Hekmat R. Madian -
Effects of Temperature and Flue Gas Recycle on the SO2 and NOx Emissions in an Oxy-fuel Fluidized Bed Combustor
Abstract Oxy-fuel combustion consists in burning a fuel with a mixture of nearly pure oxygen and a CO2-rich recycled flue gas resulting in a product flue gas from the boiler containing mainly CO2 and H2O. In this work, the effect...
2013 / M. de las Obras-Loscertales, A. Rufas, L.F. de Diego, F. García-Labiano, P. Gayán, et al. -
Thermal Degradation of Piperazine Blends with Diamines
Abstract Concentrated, aqueous piperazine (PZ) has been developed as an attractive solvent for use in CO2 capture for coal- fired power plants because of its low degradation rate, high CO2 capacity, and high CO2 absorption rate, but its use may be...
2013 / Omkar Namjoshi, Le Li, Yang Du, Gary Rochelle -
Results from a Pilot Plant Using Un-promoted Potassium Carbonate for Carbon Capture
Abstract A pilot plant facility has been designed and built to trial potassium carbonate solvent technology for carbon capture under a range of conditions. The rig is capable of capturing 4 - 10kg/hr of CO2 from 30 - 55kg/hr of an air-CO2 mixture,...
2013 / Dimple Quyn, Aravind V. Rayer, Jeffri Gouw, Indrawan Indrawan, Kathryn A. Mumford, et al. -
Coated stainless steel 441 as interconnect material for solid oxide fuel cells: Oxidation performance and chromium evaporation
Abstract Reactive Element (RE) and RE/cobalt-coated stainless steel AISI 441 was exposed at Solid Oxide Fuel Cell (SOFC) cathode conditions (850 °C in air with 3% water content) for up to 500 h. The chromium evaporation was measured by applying the...
2013 / J.G. Grolig, J. Froitzheim, J.-E. Svensson -
Turning CO2 into Valuable Chemicals
Abstract The transformation of CO2 using semiconductor photocatalysts is a promising alternative for developing sustainable energy sources. Nickel (Ni) based TiO2 photocatalysts immobilized onto quartz plate was assembled in a unique reactor...
2013 / Oluwafunmilola Ola, M. Mercedes Maroto-Valer, Sarah Mackintosh -
Nanofiltration of Mine Water: Impact of Feed pH and Membrane Charge on Resource Recovery and Water Discharge2014 / Mark Mullett, Roberta Fornarelli, David Ralph
-
Analysis on combustion and gasification characteristics of Datong coal in a CO2 -rich atmosphere by different temperature gradient–Effect of oxygen concentration
Abstract Current technical challenge for state-of-the-art coal power plants covers not only higher thermal efficiency, also lower CO2 emission or easier CO2 separation and capturing. One of expected technologies to achieve it, Integrated...
2011 / Zhigang Li, Xiaoming Zhang, Yuichi Sugai, Jiren Wang, Kyuro Sasaki -
Application of High-Intensity Ultrasound to Palm Oil in a Continuous System2014 / Yubin Ye, Silvana Martini