Chemical engineering topic list of research papers
-
Effectiveness of Water Desalination by Membrane Distillation Process2012 / Marek Gryta
-
The hybrid experimental simplex algorithm – An alternative method for ‘sweet spot’ identification in early bioprocess development: Case studies in ion exchange chromatography
Abstract The capacity to locate efficiently a subset of experimental conditions necessary for the identification of an operating envelope is a key objective in many studies. We have shown previously how this can be performed by using the simplex...
2012 / Spyridon Konstantinidis, Sunil Chhatre, Ajoy Velayudhan, Eva Heldin, Nigel Titchener-Hooker -
Biobutanol from food wastes – fermentative production, use as biofuel an the influence on the emissions2012 / Manuela Stoeberl, Ralf Werkmeister, Martin Faulstich, Winfried Russ
-
Modification of pure oxygen absorption equipment for concurrent stripping of carbon dioxide
Abstract The high solubility of carbon dioxide precludes significant desorption within commercial oxygen absorption equipment. This operating characteristic of the equipment limits its application in recirculating water culture systems despite its...
2004 / Barnaby J. Watten, Philip L. Sibrell, Gary A. Montgomery, Scott M. Tsukuda -
Nonlinear attenuation of sound waves by inertial cavitation bubbles
Abstract Acoustic cavitation fields generally involve clouds of inertial bubbles, expanding to many time their initial radius, and then collapsing. A correct estimation of the wave attenuation in such media requires a realistic estimation of the...
2010 / Olivier Louisnard -
Division of Spontaneous Combustion “Three-zone” in Goaf of Fully Mechanized Coal Face with Big Dip and Hard Roof
Abstract The risk of spontaneous combustion in goaf of fully mechanized coal face with big dip and hard roof is high, and gas monitoring is more difficult. The method of dividing spontaneous combustion “three-zone” by temperature rise and CO...
2012 / Zhenhua Xie, Jin Cai, Yu Zhang -
Flow injection analysis simulations and diffusion coefficient determination by stochastic and deterministic optimization methods
Abstract Stochastic and deterministic simulations of dispersion in cylindrical channels on the Poiseuille flow have been presented. The random walk (stochastic) and the uniform dispersion (deterministic) models have been used for computations of...
2013 / Witold Kucza -
High-Velocity Oxygen Fuel Thermal Spray of Fe-Based Amorphous Alloy: a Numerical and Experimental Study2009 / L. Ajdelsztajn, J. Dannenberg, J. Lopez, N. Yang, J. Farmer, et al.
-
Experimental and Modelling Studies of Mass Transfer in Centrifugal Contactors
Abstract Experimental trials have been undertaken to determine interfacial area for mass transfer in 5cm and 25cm diameter annular centrifugal contactors. All trials used 30% TBP in Exxsol D80 diluent, with extraction of HNO3 being studied at...
2012 / Steve Drewery, Erik Heeres, Steve Percival, Chris Rhodes, Mitch St George, et al. -
The Influence of pH on Phosphatidylethanolamine Monolayer at the Air/Aqueous Solution Interface2012 / Aneta Dorota Petelska, Monika Naumowicz, Zbigniew Artur Figaszewski
-
A dynamic method based on the specific substrate uptake rate to set up a feeding strategy for Pichia pastoris2011 / Christian Dietzsch, Oliver Spadiut, Christoph Herwig
-
Combustion and emissions characteristics of toluene/n-heptane and 1-octene/n-octane binary mixtures in a direct injection compression ignition engine
Abstract Successfully designing and making effective of use of the next generation of liquid fuels, which will be derived from a range of biomass and fossil sources, requires an understanding of the interactions between structurally similar and...
2013 / Paul Hellier, Nicos Ladommatos, Robert Allan, John Rogerson -
New Forward Osmosis Membranes with Internal Morphology Design2012 / R. Garcia-Valls, K. Briceño, I. Fonseca, L. Vega, S. Guri
-
Impact of the equivalence ratio and the mass flow rate on turbulent lean premixed prevaporized combustion
Abstract Our contribution consists of the demonstration of the advantages of LES-WALE coupled with PDF approach including progress variable (c) in reacting flow, by using the Fluent-CFD. The confirmation is based on the comparison of three...
2011 / Fethi Bouras, Azeddine Soudani -
Thermal degradation of monoethanolamine at stripper conditions
Abstract Thermal degradation of monethanolamine (MEA) is quantified as a function of initial amine concentration, CO2 loading, and temperature over a range of expected stripper conditions in an amine absorber/stripper unit. The sum of the...
2009 / Jason Davis, Gary Rochelle -
The effect of condensable minor components on the gas separation performance of polymeric membranes for carbon dioxide capture
Abstract Polymeric membranes as a carbon dioxide capture technology have a number of advantages over other approaches, including their low cost, high performance separation, ease of synthesis, as well as mechanical and thermal stability. However,...
2009 / Colin A. Scholes, Sandra E. Kentish, Geoff W. Stevens -
Rheological Characterization of Clay-PolyesterComposites
Abstract Polymer-clay composites, which consist of clay particles dispersed in a polymeric matrix, have been used in different applications. Clay fillers are widely used in polymers as ways to produce cost-effective, strong, and energy efficient...
2011 / Basim Abu-Jdayil, Salah Addin Al-Omari, Hanifa Taher, Latifa Al-Nuaimi -
Characterization of Nanoporous Ceramic Granules Made with Coal Fly Ash and Their Utilization in Phenol Removal from Water2013 / Zhaoqian Jing
-
Production of Chemoenzymatic Catalyzed Monoepoxide Biolubricant: Optimization and Physicochemical Characteristics2012 / Jumat Salimon, Nadia Salih, Bashar Mudhaffar Abdullah
-
Effects of Anode Flow Field Design on CO2 Bubble Behavior in μDMFC2009 / Miaomiao Li, Junsheng Liang, Chong Liu, Gongquan Sun, Gang Zhao