Materials engineering topic list of research papers
-
Controller Design of Quadrotor Aerial Robot
Abstract This paper deduced the nonlinear dynamic model of a quadrotor aerial robot, which was a VTOL (vertical tale-off and landing) unmanned air vehicle. Since that is a complex model with the highly nonlinear multivariable strongly coupled and...
2012 / Yu Yali, Sunfeng, Wang Yuanxi -
Investigation of Optical Transmission in Thin Metal Films
Abstract Thin metal films have recently attracted large interest due to their practical application in photo-detectors, solar cells and quantum electronics. It is known that thin films of noble metals such as Au, Ag, and Cu have a maximum optical...
2012 / A. Axelevitch, B. Gorenstein, G. Golan -
Mechanism of Gases Transfer through Polymer Membranes and Membrane Module Calculation Model to Separate Gases
Abstract The given work considers gas separation process using non-porous polymer membranes. Here membrane separation of gas mixtures is based on employment of permeation-selective membranes and gases transfer mechanism through non-porous membranes...
2012 / Umarova Zhanat, Eskendirov Sharipzhan -
Hot Ultrasonically Assisted Turning of β-Ti Alloy
Abstract Ultrasonically assisted turning (UAT) is an advanced machining technique, in which vibration with frequency in excess of 20kHz is superimposed on the cutting tool's movement. This novel machining technique has been shown to result in a...
2012 / Riaz Muhammad, Agostino Maurotto, Anish Roy, Vadim V. Silberschmidt -
An Experimental Study on the Mechanical and Microstructural Properties of Geopolymers
Abstract Geopolymer is a new class of inorganic polymer synthesized by activation of an aluminosilicate source with an alkaline hydroxide or silicate solution. In recent years, geopolymeric materials have attracted much more attention because of...
2012 / E. Arioz, O. Arioz, O. Mete Kockar -
Spot Edge Detection in Microarray Images Using Bi-Dimensional Empirical Mode Decomposition
Abstract A Deoxyribonucleic Acid (DNA) microarray is a collection of microscopic DNA spots attached to a solid surface, such as glass, plastic or silicon chip forming an array. The analysis of DNA microarray images allows the identification of gene...
2012 / J. Harikiran, Y. NarasimhaRao, B. Saichandana, P.V. Lakshmi, R. Kiran Kumar -
A Review on Machining and Tribological Behaviors of Aluminium Hybrid Composites
Abstract Aluminium hybrid metal matrix composites have been widely used as substitute materials in automobile, aero space and structural applications because of their high wear resistance and strength to weight ratio. Manufacturing these types of...
2012 / Ganesan Pandi, Saravanan Muthusamy -
Research on Dynamic Fracture Toughness of Granite and Finite Element Analysis
Abstract In order to investigate the dynamic fracture toughness of granite,the brazilian disk specimens were subjected to diametral impact by using the splite Hopkinson pressure bar.Based on three-dimensional model of SHPB system,the test loading...
2012 / Gong Nengping, Gao Yuan, Jiang Xiangyang, Luo Yufan -
Plastic Analysis of Steel Frame Structures using Computer Modeling
Abstract Plastic analysis is used in design of steel structures composed of various elements such as beams, frames, girders, arches etc. Here it is applied for determining the load-carrying capacity or limiting load at which the structure collapses. ...
2012 / J.M. Djoković, K.M. Veljković, R.R. Nikolić -
Advanced alginate-based hydrogels2015 / Rainer Detsch, Bapi Sarker, Tobias Zehnder, Gerhard Frank, Aldo R. Boccaccini
-
Development of Power System Relay Protection Experiment in E-Learning
Abstract The learning of power system relay protection requires some practical drills. Laboratories have therefore been built in campus and the experiment teaching has been carried out. However, in distance education, the actual presence of the...
2012 / Gangjun Zhai, Ying Wang, Longzhi Li, Huawei Miao -
An Advanced Review of Hybrid Machine Translation (HMT)
Abstract Machine translation (MT) has been the milestone of language understanding, ultimately seeking to provide high quality translation between pairs of languages, which is the genesis of natural language processing (NLP). Hybrid machine...
2012 / H.W. Xuan, W. Li, G.Y. Tang -
The Effect Of Grain Size On The Mechanical Properties Of Aluminum2015 / G. Jeong, J. Park, S. Nam, S.-E. Shin, J. Shin, et al.
-
A Model for Penetration Resistance in Brittle Materials Taking into Account Strain Hardening of Solid Phase in Mescal-zone Powder Material
Abstract A new analytical model is proposed for penetration resistance of brittle materials that takes into account strain hardening of solid phase of powder material in Mescal zone ahead of penetrator. The strengthening is taken into account by...
2015 / B.A. Galanov, V.V. Kartuzov, S.M. Ivanov -
Communications orales – Forum structures de prise en charge de la douleur2011 /
-
Light Management in Transparent Conducting Oxides by Direct Fabrication of Periodic Surface Arrays
Abstract Line- and hexagonal-like periodic textures were fabricated on aluminium zinc oxide (AZO) using direct laser interference patterning method. It was found that hexagonally patterned surfaces show a higher performance in both transparency and...
2013 / S. Eckhardt, C. Sachse, A.F. Lasagni -
Flashing Flow of Subcooled Liquid through Small Cracks
Abstract In Pressurized Water Reactors and in CANDU reactors steam generator (SG) tubes represent a major fraction of the reactor primary coolant pressure boundary. The ability to estimate the leak rates from the through wall cracks in the steam...
2013 / S.T. Revankar, B. Wolf, J.R. Riznic -
Catalytic Propane Dehydrogenation in a Two Zone Fluidized Bed Reactor with Hollow Fibre Palladium Membrane2012 / J.A. Medrano, I. Julian, F.R. Garcia-Garcia, K. Li, J. Herguido, et al.
-
Electropolishing of Microchannels and its Application to Dialysis System
Abstract We present a microfilter used for selective separation of nano molecular solution and separating waste, such as urea. The microfilter system consists of two layers of micro chambers made of stainless steel 316L (SS 316L) and one piece of...
2013 / Gunawan Setia Prihandana, Muslim Mahardika, Yuya Nishinaka, Hikaru Ito, Yoshihiko Kanno, et al. -
Optical quality improvement of InGaAs/AlAs/AlAsSb coupled double quantum wells grown by molecular beam epitaxy2004 / J. Kasai, T. Mozume, H. Yoshida, T. Simoyama, A. V. Gopal, et al.