Materials engineering topic list of research papers
-
The Interactive Holography as Metaphor and Innovation in Optical Representation in Design
Abstract The strong technological development in the use of virtual images has allowed science, associated with design, to integrate them to different applications in the physical field, interacting with the real world, proposing metaphors and...
2015 / Ekaterina Emmanuil Inglesis Barcellos, Galdenoro Botura Junior -
Modelling and Experimental Investigation of Cutting Temperature when Rough Turning Hardened Tool Steel with PCBN Tools
Abstract In this study the cutting tool temperature that develops during rough turning of hardened cold-work tool steel is modelled on the basis of experimental data. The data obtained from a series of thermocouples, placed on a PCBN insert, into an ...
2015 / V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, I.A. Petrusha, J.-E. Ståhl -
Euler–Rodrigues formula variations, quaternion conjugation and intrinsic connections
Abstract This paper reviews the Euler–Rodrigues formula in the axis–angle representation of rotations, studies its variations and derivations in different mathematical forms as vectors, quaternions and Lie groups and investigates their intrinsic...
2015 / Jian S. Dai -
An Advanced Cryogenic Air Separation Process Based on Self-heat Recuperation for CO2 Separation
Abstract An advanced cryogenic air separation process for oxy-combustion is proposed based on self-heat recuperation technology. Compared with the conventional double-column cryogenic air separation process, only one distillation column is used in...
2015 / Qian Fu, Yasuki kansha, Chunfeng Song, Yuping Liu, Masanori Ishizuka, et al. -
Oil Spill Monitoring and Damage Assessment via PolSAR Measurements
Abstract This study aims at describing the key role played by polarimetric Synthetic Aperture Radar (polSAR) remotely sensed measurements for oil spill analyses. PolSAR measurements are shown to be useful to the interested user (e.g. local...
2015 / Ferdinando Nunziata, Maurizio Migliaccio -
Fundamental Study on a New Thin Oil-film Recovery Device Based on the MHD Method
Abstract The MHD maritime oil spill recovery method has many advantages in tackling the marine thin oil-film. The existing device, in which the MHD channel is arranged horizontally, can’t operate successfully under wave conditions and the oil and...
2015 / Jiangjin Liu, Ling zhi Zhao, Ciwen Sha, Yan Peng, Wei An, et al. -
Experimental Evaluation of Ductile Fiber Reinforced Cement-based Composite Beams Incorporating Shape Memory Alloy Bars
Abstract The objective of the study is to explore the use of two promising materials, i.e., ductile fiber reinforced cement-based composites (DFRCCs) and shape memory alloys (SMA), in structural beams for enhanced seismic performance. DFRCCs are...
2014 / Chung-Chan Hung, Wei-Ming Yen -
Graphene-based Schottky Device Detecting NH3 at ppm level in Environmental Conditions
Abstract We present a graphene/n-Si Schottky junction for NH3 detection at level of few tens of parts-per-million (ppm). Graphene was synthesized by Liquid Phase Exfoliation and transferred onto the Si by drop casting. The Schottky barrier...
2014 / Tiziana Polichetti, Filiberto Ricciardella, Filippo Fedi, Maria Lucia Miglietta, Riccardo Miscioscia, et al. -
A-Novel-CdS-Nanorod with Stacking Fault Structures: Preparation and Properties of Visible-Light-Driven Photocatalytic Hydrogen Production from Water Splitting
Abstract In the present study, CdS nanorod particles with the stacking fault structures were hydrothermally synthesized through a dissolution-recrystallization approach in concentrated ammonia solvent, for the first time. It was clear that...
2015 / Kai He, Liejin Guo -
Automatic Swept Volume Decomposition based on Sweep Directions Extraction for Hexahedral Meshing
Abstract Automatic and high quality hexahedral meshing of complex solid models is still a challenging task. To guarantee the quality of the generated mesh, current commercial software normally requires users to manually decompose a complex solid...
2014 / Haiyan Wu, Shuming Gao -
Rover wheel charging on the lunar surface
Abstract The environment at the Moon is dynamic, with highly variable solar wind plasma conditions at the lunar dayside, terminator, and night side regions. Moving objects such as rover wheels will charge due to contact electrification with the...
2015 / Telana L. Jackson, William M. Farrell, Michael I. Zimmerman -
Forging Process Control: Influence of Key Parameters Variation on Product Specifications Deviations
Abstract Process control in forging industry is essential to ensure a better quality of the product with a lower cost at the end of the manufacturing process. To control the process, a number of key parameters must be monitored to prevent product or ...
2014 / Zakaria Allam, Eric Becker, Cyrille Baudouin, Régis Bigot, Pierre Krumpipe -
Planning Park for Liveable Cities: Green Technology Design Practice for Tasik Biru Kundang, Kuang, Selangor, Malaysia
Abstract Green Technology design practice is a new solution that must be applicable to preserve a nature and reduce the pollution. There are so much innovation could be use to in the development of the park to reduce the electricity use,...
2012 / Rijal Saffuan, Junaidah Ariffin, Zamreen Amin -
Optimization of Multi-objective Response during CNC Turning Using Taguchi-fuzzy Application
Abstract In present scenario CNC turning operation plays a vital role in metal based manufacturing industries. Therefore selection of optimum machining parameters, Tool geometry and cutting condition etc. for the variety of materials is an important ...
2014 / Surendra Kumar Saini, Sharad Kumar Pradhan -
Tough Nanocomposite Ionogel-based Actuator Exhibits Robust Performance2014 / Xinhua Liu, Bin He, Zhipeng Wang, Haifeng Tang, Teng Su, et al.
-
Model Driven Engineering for the Implementation of User Roles in Industrial Service Robot Applications
Abstract The implementation and installation of today's service robot applications into industrial processes is a challenging and time taking task that is usually executed by domain experts. The aim of the PRACE EU-project is to bring a mobile dual...
2014 / Alexander Bubeck, Benjamin Maidel, Felipe Garcia Lopez -
Time Efficient Simulations of Plunge and Dwell Phase of FSW and its Significance in FSSW
Abstract Friction Stir Spot Welding (FSSW) is gathering attention of automotive and aerospace sectors. It is an alternative for rivets, electric resistance welding and offers substantial advantages with regard to energy consumption, environmental...
2014 / Vinayak Malik, N.K Sanjeev, H. Suresh Hebbar, Satish V. Kailas -
Free Convective Heat Transfer Flow of Temperature Dependent Thermal Conductivity Along a Vertical Flat Plate with Heat Generation
Abstract The natural convection heat transfer flow of temperature dependent thermal conductivity on an electrically conducting fluid along a vertical flat plate with heat generation have been investigated in this paper. The governing equations with...
2014 / A.K.M. Safiqul Islam, M.A. Alim, Md. Rezaul Karim -
Electron backscatter diffraction (EBSD) microstructure evolution in HPT copper annealed at a low temperature
Abstract Detailed EBSD analysis was performed on copper specimens processed by high-pressure torsion at P =6GPa for one whole turn and subsequently annealed at a temperature of 100°C for 15, 30 and 60min. The basic...
2014 / Alexander P. Zhilyaev, Semyon N. Sergeev, Terence G. Langdon -
Transient effect of soil thermal diffusivity on performance of EATHE system
Abstract This paper presents effect of thermo-physical properties of soil on performance of an Earth Air Tunnel Heat Exchanger (EATHE). The analysis has been carried out using a validated three-dimensional, transient numerical model for three...
2015 / Anuj Mathur, Ayushman Srivastava, Jyotirmay Mathur, Sanjay Mathur, G.D. Agrawal