Materials engineering topic list of research papers
-
Research of Coal Substituting Oil (Natural Gas) in China
Abstract The complexion that coal gives priority to others resource is decided by the energy production and consume structure. It is difficult to change in the future. With the economy growth, the energy demand is increasing, especially the oil and...
2012 / Lifeng Zhang -
Effect of Asymmetric Well Quantum Dots-in-a-well Infrared Photodetectors on Density of States Using NEGF Formalism
Abstract Local Density of State (LDOS) and hence Density of State (DOS) at different energy levels of asymmetric conical shaped InAs/InGaAs quantum dots-in-a-well (DWELL) infrared photo-detector has been calculated through Non-Equilibrium Green's...
2012 / Soumitra Roy Joy, Tonmoy Kumar Bhowmick, Golam Md. Imran Hossain, Farseem Mannan Mohammedy -
Big Signals from Small Particles: Regulation of Cell Signaling Pathways by Nanoparticles2013 / Jens Rauch, Walter Kolch, Sophie Laurent, Morteza Mahmoudi
-
Modeling of Qiandao Lake submerged floating tunnel subject to multi-support seismic input
Abstract The modeling and seismic analysis of Qiandao lake submerged floating tunnel (SFT) is addressed with particular attention to the mooring system, to dissipation issues and to the spatial variability of the excitation, within a numerical...
2010 / Luca Martinelli, Gianluca Barbella, Anna Feriani -
Laser bending of tailor machined blanks: Effect of start point of scan path and irradiation direction relation to step of the blank
Abstract Laser bending is a process of gradually adding plastic strain to a metal component to generate desired shape. In this paper, laser bending of tailor machined blanks has been investigated experimentally. For this purpose, effects of start...
2016 / Mehdi Safari, Hosein Mostaan, Mahmoud Farzin -
Size-dependent optical properties of Au nanorods
Abstract In the fast evolving field of nanoscience and nanotechnology, where size and shape are crucial in deciding the optoelectronic properties of nanomaterials, the understanding of size and shape dependent behavior is of direct relevance to...
2013 / S.L. Smitha, K.G. Gopchandran, N. Smijesh, Reji Philip -
Non-volatile memory based on the ferroelectric photovoltaic effect2013 / Rui Guo, Lu You, Yang Zhou, Zhi Shiuh Lim, Xi Zou, et al.
-
Activated Carbon-hydrogen based Continuous Sorption Cooling in Single Adsorbent Bed with LN2 Heat Sink
Abstract Quick and periodic inflow-outflow of adsorbate in an adsorbent column createsa differential temperature between the two ends of it, allowing for the generation of continuous sorption cooling in a single adsorbent tube. The concept has been...
2015 / Susmita Koley, Indranil Ghosh -
The Design and Realization for a Multiplex Time Sequence Controller
Abstract In order to meet the demand of activating several devices at different moments, a multiplex time sequence controller is developed in this paper. When the controller receives the trigger signal for starting, the time sequential control...
2011 / Tian Hui, Ni Jin-Ping, Pang Qiu-Hong -
Bio-based plastic a way for reduce municipal solid waste
Abstract There are many ways to reduce plastic waste in the environment. Bio-based plastic could be a best solution for sustainable environment. In this article bio-based plastic were prepared. Potato starch and corn starch as a biopolymer blending...
2011 / Shahrzad Khoramnejadian, Jamileh Jamali Zavareh, Shirin Khoramnejadian -
Experimental Study of Pre-splitting Blasting Enhancing Pre- drainage Rate of Low Permeability Heading Face
Abstract Taking the heading face of a coal mine as an example, the test of deep-hole pre-splitting blasting was processed. The amount of gas draining after pre-splitting was compared to the amount of direct drainage, and the effective radius of...
2011 / Liu Jingcheng, Wang hongtu, Yuan Zhigang, Fan Xiaogang -
Long-Term Mechanical Reliability of Ceramic Thick-Film Circuits and Mechanical Sensors Under Static Load
Abstract In this work, we study the long-term static fatigue (constant load, room temperature, ∼100% humidity) performance of ceramic thick-film circuits, as a function of substrate and thick-film compositions, comparing standard 96% alumina with...
2012 / Thomas Maeder, Caroline Jacq, Peter Ryser -
Design Considerations of Step-Down Switching Converters
Abstract To obtain the design method of inductance and capacitance of a step-down switching converter, its Output Voltage Ripple (OVR) in CCM and DCM is analyzed. The Maximum OVR(MOVR) in each operating region is obtained, respectively. It is...
2011 / Xue Jian, Zhang Xiao-Qing, Liu Xin, Li Shu-Peng -
Fabrication of a miniature all-glass fibre optic pressure and temperature sensor
Abstract In this paper the fabrication of a miniature all-glass fibre optic pressure and temperature sensor is presented. The sensor combines the functionality of a miniature all-silica diaphragm based Extrinsic Fabry Perot Interferometric (EFPI)...
2012 / K. Bremer, E. Lewis, G. Leen, B. Moss, S. Lochmann, et al. -
Theory of gas sensitivity of nano-structured MOX layers. Selection rules for gas sensitive materials
Abstract We elaborated a logically closed theory of the conductivity of nano-structured semiconductor material (NSSM) valid in a large range of grain sizes a. It is shown that high sensitivity to electronegative gases (O2, F2, etc.) is observed,...
2012 / Nikolay Zaretskiy, Leonid Menshikov, Alexey Vasiliev -
Review of Physical Based Monitoring Techniques for Condition Assessment of Corrosion in Reinforced Concrete2013 / Ying Lei, Zhu-Peng Zheng
-
The Formation Site of Noninterfacial Misfit Dislocations in InAs/GaAs Quantum Dots2014 / Shuai Zhou, Yumin Liu, Pengfei Lu, Lihong Han, Zhongyuan Yu
-
Production, Characterization, and Applications of Porous Materials2014 / Nikolaos Michailidis, Alexander Tsouknidas, Louis-Philippe Lefebvre, Thomas Hipke, Naoyuki Kanetake
-
The Dyeing Procedures Evaluation of Wool Fibers with Prangos ferulacea and Fastness Characteristics2014 / Hossein Barani, Shahdokht Rahimpour
-
Study on Non-Metallic Inclusions in Laser-Welded TRIP-Aided Nb-Microalloyed Steel2014 / A. Grajcar, M. Różański, M. Kamińska, B. Grzegorczyk