Materials engineering topic list of research papers
-
Influence of Mo and Ta additions on solidification behavior of Ni3Al single crystal alloys
Abstract Ni3Al (Ni75Al25) and Ni3Al–2Mo/Ta (Ni73.5Al24.5Mo/Ta2) single crystals were prepared by the Bridgman method under high temperature gradient (~170°C/cm) at the withdrawal rates of 5 and 20μm/s. The experimental results showed that the...
2015 / Cheng Ai, Shusuo Li, Yunfei Liang, Shengkai Gong -
Recent advances on thermal analysis of stretchable electronics
Abstract Stretchable electronics, which offers the performance of conventional wafer-based devices and mechanical properties of a rubber band, enables many novel applications that are not possible through conventional electronics due to its brittle...
2015 / Yuhang Li, Yuyan Gao, Jizhou Song -
The electric charge and climb of edge dislocations in perovskite oxides: The case of high-pressure MgSiO3 bridgmanite
Abstract Dislocation climb is expected to play a major role in high-temperature creep of complex ionic oxides, however the fundamental mechanisms for climb are poorly understood in this class of materials. In this work we investigate the interaction ...
2016 / P. Hirel, P. Carrez, E. Clouet, P. Cordier -
Vulnerability of mountain glaciers in China to climate change
Abstract Mountain glaciers in China are an important water source for both China and adjoining countries, and therefore their adaptation to glacier change is crucial in relation to maintaining populations. This study aims to improve our...
2015 / Jian-Ping Yang, Yong-Jian Ding, Shi-Yin Liu, Chun-Ping Tan -
Metagenomic data of fungal internal transcribed spacer from serofluid dish, a traditional Chinese fermented food
Abstract Serofluid dish (or Jiangshui, in Chinese), a traditional food in the Chinese culture for thousands of years, is made from vegetables by fermentation. In this work, microorganism community of the fermented serofluid dish was investigated by...
2015 / Peng Chen, Yang Zhao, Zhengrong Wu, Ronghui Liu, Ruixiang Xu, et al. -
Silicon-based Photonic Integrated Circuits for the Mid-infrared
Abstract Silicon-based photonic integrated circuits (PICs) operating in the mid-infrared wavelength range are presented. Firstly, it is shown that the operation of the SOI-based waveguide circuits can be pushed beyond the telecom window till a...
2016 / Aditya Malik, Muhammad Muneeb, Sanja Radosavljevic, Milos Nedeljkovic, Jordi Soler Penades, et al. -
Selected aspects of dielectric behavior of plasma sprayed titanates2012 / Pavel Ctibor, Josef Sedlacek
-
Development of a cell-defined siRNA microarray for analysis of gene functionin human bone marrow stromal cells
Abstract Small interfering RNA (siRNA) screening approaches have provided useful tools for the validation of genetic functions; however, image-based siRNA screening using multiwell plates requires large numbers of cells and time, which could be the...
2016 / H.C. Kim, G.-H. Kim, S.-G. Cho, E.J. Lee, Y.-J. Kwon -
Optimization of Mechanical Loaded Lattice Structures by Orientating their Struts Along the Flux of Force
Abstract Additive Layer Manufacturing (ALM) processes like Selective Laser Melting (SLM) show a great potential for the fabrication of lightweight components due to their high geometric flexibility. Thereby, especially mesoscopic approaches feature...
2013 / G. Reinhart, S. Teufelhart -
Manufacturing of calcium phosphate scaffolds by pseudomorphic transformation of gypsum
Abstract Carbonated hydroxyapatite (CHAp) and β-tricalcium phosphate (β-TCP) have been employed for decades as constituents of scaffolds for bone regeneration because they chemically resemble bone mineral. In this study, the feasibility to...
2016 / Hudson de Araújo Batista, Marcio José Batista Cardoso, Alexandre Sales Vasconcelos, Marcus Vinicius Lia Fook, Miguel Angel Rodríguez Barbero, et al. -
Effects of prestrain on the ductile-to-brittle transition of ice
Abstract The ductile-to-brittle transition was investigated in prestrained columnar ice at −10 °C. Laboratory-grown specimens of freshwater and saline ice were prestrained under uniaxial across-column compression (to levels from ε ...
2016 / Scott A. Snyder, Erland M. Schulson, Carl E. Renshaw -
Scalability and process transfer of mesenchymal stromal cell production from monolayer to microcarrier culture using human platelet lysate
Abstract Background aims The selection of medium and associated reagents for human mesenchymal stromal cell (hMSC) culture forms an integral part of manufacturing process development and must be suitable for multiple process scales ...
2016 / Thomas R.J. Heathman, Alexandra Stolzing, Claire Fabian, Qasim A. Rafiq, Karen Coopman, et al. -
Bulk elastic properties, hardness and fatigue of calcium aluminosilicate glasses in the intermediate-silica range
Abstract Bulk elastic properties, hardness and fatigue of calcium aluminosilicate (CAS) glasses in the technically relevant region of the ternary with intermediate-silica fraction were determined by combining results of Vickers indentation,...
2015 / A. Pönitzsch, M. Nofz, L. Wondraczek, J. Deubener -
Commonly used earthquake source models2013 / Wenlong Liu, Yucheng Liu
-
Analysis of aerodynamic loading properties on hood of high-speed railway tunnel
Summary When high-speed train passing through tunnel, aerodynamic effect will be created, which may arise micro-pressure wave at tunnel exit and affect the surrounding environment around tunnel. Setting hood at tunnel entrance is effective and...
2015 / Yingxue Wang, Wenqiang Ren, Jun He, Chang Ye, Qiaolei Chang -
Second-order two-scale finite element algorithm for dynamic thermo–mechanical coupling problem in symmetric structure
Abstract The new second-order two-scale (SOTS) finite element algorithm is developed for the dynamic thermo–mechanical coupling problems in axisymmetric and spherical symmetric structures made of composite materials. The axisymmetric structure...
2016 / Zhi-Hui Li, Qiang Ma, Junzhi Cui -
Au plasmon enhanced high performance β-Ga2O3 solar-blind photo-detector
Abstract Surface plasmon polariton (SPP) is electro-magnetic wave coupled to free electron oscillations near the surface of metal, and has been used to improve the photoelectric properties in many optoelectronic devices. In the present study, the Au ...
2016 / Yuehua An, Xulong Chu, Yuanqi Huang, Yusong Zhi, Daoyou Guo, et al. -
The physics of protein self-assembly
Abstract Understanding protein self-assembly is important for many biological and industrial processes. Proteins can self-assemble into crystals, filaments, gels, and other amorphous aggregates. The final forms include virus capsids and condensed...
2016 / Jennifer J. McManus, Patrick Charbonneau, Emanuela Zaccarelli, Neer Asherie -
Plastic waste as a novel substrate for industrial biotechnology2015 / Nick Wierckx, M. Auxiliadora Prieto, Pablo Pomposiello, Victor de Lorenzo, Kevin O'Connor, et al.
-
Data set for diffusion coefficients of alloying elements in dilute Mg alloys from first-principles
Abstract Diffusion coefficients of alloying elements in Mg are critical for the development of new Mg alloys for lightweight applications. Here we present the data set of the temperature-dependent dilute tracer diffusion coefficients for 47...
2015 / Bi-Cheng Zhou, Shun-Li Shang, Yi Wang, Zi-Kui Liu