Materials engineering topic list of research papers
-
Dielectric Relaxation in Complex Perovskite Oxide Sr(Gd<sub>0.5</sub>Nb<sub>0.5</sub>)O<sub>3</sub>2012 / Pritam Kumar, Ajay Kumar Sharma, Bhrigunandan Prasad Singh, Tripurari Prasad Sinha, Narendra Kumar Singh
-
Degradation Mechanisms for GaN and GaAs High Speed Transistors2012 / David Cheney, Erica Douglas, Lu Liu, Chien-Fong Lo, Brent Gila, et al.
-
Theoretical nonlinear response of complex single crystal under multi-axial tensile loading2013 / Anil Misra, W. Y. Ching
-
Mechanics of DNA packaging and ejection from elastic phage capsid
Abstract This study intends to investigate how the elasticity of a bacterial phage can affect the process of DNA packaging and ejection. For this purpose, we propose a unified continuum and statistical mechanics model by taking into account the...
2013 / Long Li, Jizeng Wang, Youhe Zhou -
Super elastic strain limit in metallic glass films2012 / Q. K. Jiang, P. Liu, Y. Ma, Q. P. Cao, X. D. Wang, et al.
-
207. Anti-GAD Antibody Targeted Non-Viral Gene Delivery to Islet Beta Cells2005 / J JEONG, M LEE, W KIM, J YOCKMAN, T PARK, et al.
-
Piezoelectric energy harvesting from morphing wing motions for micro air vehicles
Abstract Wing flapping and morphing can be very beneficial to managing the weight of micro air vehicles through coupling the aerodynamic forces with stability and control. In this letter, harvesting energy from the wing morphing is studied to power...
2013 / Abdessattar Abdelkefi, Mehdi Ghommem -
Stress and fabric in granular material
Abstract It has been well recognized that, due to anisotropic packing structure of granular material, the true stress in a specimen is different from the applied stress. However, very few research efforts have been focused on quantifying the...
2013 / Ching S. Chang, Yang Liu -
High-resolution imaging of zeolite with aberration-corrected transmission electron microscopy2013 / Kaname Yoshida, Yukichi Sasaki, Hiroki Kurata
-
On the use of Areal Roughness Parameters to Assess Surface Quality in Laser Cutting of Stainless Steel with CO2 and Fiber Sources
Abstract Laser cutting provides various advantages such as high flexibility in terms of process parameters and cut material type, as well as the possibility to obtain complex geometry in different dimensions with high precision. From industrial...
2015 / Erica Librera, Giovanni Riva, Hossein Safarzadeh, Barbara Previtali -
Implementation of Different Techniques for Monitoring the Corrosion of Rebars Embedded in Concretes Made with Ordinary and Pozzolanic Cements
Abstract For the development of an intermediate radioactive waste repository, two different types of reinforced concrete were analyzed in terms of durability: one made with ordinary portland cement and the other one made with pozzolanic cement. The...
2015 / D.R. Vazquez, Y.A. Villagrán Zaccardi, C.J. Zega, M.E. Sosa, G.S. Duffó -
An Experimental Study of a Cyclonic Vertical Axis Wind Turbine for Domestic Scale Power Generation
Abstract The primary objective of this paper is to investigate a cyclonic domestic scale vertical axis wind turbine with semicircular shaped blades under a range of wind speeds. A 16-bladed rotor was initially designed and itstorques and angular...
2015 / Bavin Loganathan, Harun Chowdhury, Israt Mustary, Firoz Alam -
Six Sigma Implementations in Supply Chain: An Application for an Automotive Subsidiary Industry in Bursa in Turkey.
Abstract The six sigma methodology have an important place for developing and reducing the actions which do not have inner process in supply chain in the firms. The aim of six sigma is defining, analyzing, correcting and improving the variables,...
2015 / Hikmet Erbiyik, Muhsine Saru -
An empirical model to describe performance degradation for warranty abuse detection in portable electronics
Abstract Portable electronics makers have introduced liquid damage indicators (LDIs) into their products to detect warranty abuse caused by water damage. However, under certain conditions, these indicators can exhibit inconsistencies in detecting...
2015 / Hyunseok Oh, Seunghyuk Choi, Keunsu Kim, Byeng D. Youn, Michael Pecht -
Fracture Energy of Foamed Concrete Based on Three-Point Bending Test on Notched Beams
Abstract A series of static loading tests was performed to determine the fracture properties of foamed concrete of varying density. Beams with dimensions of 100×100×840 mm with a central notch were tested in three-point bending. Then, remaining...
2015 / Marcin Kozłowski, Marta Kadela, Alfred Kukiełka -
Characterization of Fatigue Life of Ultrafine Grained NiTi Superelastic Wires Under Uniaxial Loading
Abstract The role of the stress induced martensitic transformation on the fatigue life of Ni-rich ultrafine grained NiTi superelastic wires has been investigated. Two types of experiments have been considered to elucidate the question. In the first...
2015 / Sebastián Jaureguizahar, Hugo Soul, Mirco Chapetti, Alejandro Yawny -
Incremental Forming with Local Heating by Laser Irradiation for Magnesium Alloy Sheet
Abstract An incremental sheet forming system with dynamic local heating by laser irradiation was developed to form magnesium alloy sheet which is typical lightweight hard-to-form sheet metal. In this process, tool contact area of a blank sheet is...
2014 / Ryutaro Hino, Keita Kawabata, Fusahito Yoshida -
Rheological Properties of Sheared Vesicle and Cell Suspensions
Abstract Numerical simulations of vesicle suspensions are performed in two dimensions to study their dynamical and rheological properties. An hybrid method is adopted, which combines a mesoscopic approach for the solvent with a curvature-elasticity...
2015 / Antonio Lamura, Gerhard Gompper -
Directional Solidification of Sn-Ag-Cu Alloys
Abstract The alloys of Sn-Ag-Cu family (SAC) are candidates for lead-free replacement of Sn-Pb eutectic used in welding processes of electronic devices. These alloys, with eventual adding of Zn, In and Bi highly improves the morphological stability...
2015 / Osvaldo Fornaro, Carina Morando, Olga Garbellini, Hugo A. Palacio -
The Age-Precipitations Structure Of Al-Mg-Ge Alloy Aged At 473K2015 / A. Kawai, K. Watanabe, K. Matsuda, S. Ikeno