Materials engineering topic list of research papers
-
Comparative performance of desiccant wheel with effective and ordinary regeneration sector using mathematical model2014 / Avadhesh Yadav, Laxmikant Yadav
-
Effect of Heat Treatment on Chemical Segregation in CMSX-4 Nickel-Base Superalloy2013 / A. Szczotok, B. Chmiela
-
STATCOM and Capacitor Banks in a Fixed-speed Wind Farm
Abstract Wind Farms are the viable solution for delivering clean energy in near future. There are many difficulties in ensuring higher quality power into the grid, as demanded by the more and more stringent grid codes. The solution of these problems ...
2014 / M. Laouer, A. Mekkaoui, M. Younes -
High throughput assessment and chemometric analysis of the interaction of epithelial and fibroblast cells with a polymer library
Abstract Tissue engineering has the potential to revolutionize medical therapies, in the ultimate case being able to grow replacement organs. Different cell types are organized specifically within tissues, thus, materials that can effectively direct ...
2014 / Adam D. Celiz, Helen C. Harrington, Andrew L. Hook -
CFRP Mechanical Anchorage for Externally Strengthened RC Beams under Flexure
Abstract De-bonding of carbon fiber reinforced polymers (CFRP) sheets and plates from the concrete substrate is one of the major reasons behind premature failures of beams that are externally strengthened with such CFRP materials. To delay or...
2014 / Alnadher Ali, Jamal Abdalla, Rami Hawileh, Khaled Galal -
Nano-enabled membranes technology: Sustainable and revolutionary solutions for membrane desalination?
Abstract Multidisciplinary, innovative and high values development of high performance, cost-effective and environmentally acceptable separation systems is highly desired to tackle the sustainability challenges that facing current desalination...
2015 / P.S. Goh, A.F. Ismail, N. Hilal -
Fracture Characteristics of Monolayer CVD-Graphene2014 / Yun Hwangbo, Choong-Kwang Lee, Sang-Min Kim, Jae-Hyun Kim, Kwang-Seop Kim, et al.
-
Effects of Waste Cooking Oil Biodiesel Use on Engine Fuel Consumption and Emissions: A Study on the Impact on Oxidation Catalyst and Particulate Filter
Abstract The wide use of biodiesel has been driven by its reduction potential on greenhouse emissions from diesel engines without significant technological modifications. In this study a diesel engine for non-road applications has...
2015 / Stefano Cordiner, Vincenzo Mulone, Matteo Nobile, Vittorio Rocco -
Characteristics of Heavy Metal Species Transformation of Pb, Cu, Zn from Municipal Sewage Sludge by Thermal Drying
Abstract Thermal process allow for a significant reduction in the weight and volume of transformed sewage sludge. The high heavy metal content in sewage sludge effectively reduces the possibility of its agricultural use. This study investigated...
2016 / Jinping Li, Jinhua Gan, Yunjiao Hu -
Less winter cloud aids summer 2013 Arctic sea ice return from 2012 minimum2014 / Yinghui Liu, Jeffrey R Key
-
Structure and Calibration of Constitutive Equations for Granular Soils2015 / Andrzej Sawicki, Justyna Sławińska, Jacek Mierczyński
-
Exergy analysis on solar thermal systems: A better understanding of their sustainability
Abstract This paper presents a review of exergy analysis of solar thermal systems. It includes both various types of solar collectors and various applications of solar thermal systems. As solar collectors are an important technology when...
2015 / Soteris A. Kalogirou, Sotirios Karellas, Viorel Badescu, Konstantinos Braimakis -
Hydrogen and Fuel Cell Technologies at the Hydrogen South Africa (HySA) Systems Competence Centre2014 / Bruno G. Pollet, Sivakumar Pasupathi, Gerhard Swart, Mykhaylo Lototskyy, Mario Williams, et al.
-
Deformation and Thermal Analysis of the Guideways of a Large Scale Aspheric Machine Tool
Abstract Large scale aspheric lens are very important in both national defense and civil industries. For the fabrication of such lens, a large scale aspheric machine tool is developed. In this paper, we focus on the analysis of the temperature...
2015 / Shuming Yang, Pengfei Wu, Shilong Liu, Lin Sun, Pu Zhao, et al. -
Analysis of the Effect of Variable Lateral Gap Maintaining Behavior of Vehicles on Traffic Flow Modeling
Abstract Vehicular interaction between different types of vehicles, in both the lateral and longitudinal directions, significantly affects the heterogeneous traffic flow modeling. From the field data it has been observed that the drivers vary gaps...
2016 / Dibyendu Pal, C. Mallikarjuna -
Giant Magnetoimpedance (GMI) Effect and Field Sensitivity of Ferrofluid Coated Co66Fe2Si13B15Cr4 Soft Magnetic Amorphous Microwire
Abstract Co66Fe2Si13B15Cr4 based amorphous microwire was developed at the laboratory using in-water quenching apparatus. The field sensitivity of the wire was enhanced when coated with ferrofluids. The presence of coating also decreased the...
2014 / Tarun Kumar Das, Sushil Kumar Mandal, Asish Kumar Panda, Soumya Bhattacharya, Pallab Banerji, et al. -
Recent Progress on PEDOT-Based Thermoelectric Materials2015 / Qingshuo Wei, Masakazu Mukaida, Kazuhiro Kirihara, Yasuhisa Naitoh, Takao Ishida
-
Phase change materials and thermal energy storage for buildings
Abstract It is well known that there is a need to develop technologies to achieve thermal comfort in buildings lowering the cooling and heating demand. Research has shown that thermal energy storage (TES) is a way to do so, but also other purposes...
2015 / Alvaro de Gracia, Luisa F. Cabeza -
A study on High Speed End Milling of Titanium Alloy
Abstract Titanium alloys are widely used in aerospace industries, due to its high strength to weight ratio and light weight. This paper investigates high speed end milling of titanium alloy (Ti–6% Al–4% V) using carbide insert based end mill cutter. ...
2014 / V. Krishnaraj, S. Samsudeensadham, R. Sindhumathi, P. Kuppan -
Bibliometric Mapping of “International Symposium on Safety Science and Technology (1998-2012)”
Abstract This paper aim to analyze the papers published in International Symposium on Safety Science and Technology (ISSST) in the period 1998-2012. Totally, 2781 ISSST papers were got from Web of Science, Bibliometrics indicators including annual...
2014 / Li Jie, Guo Xiaohong, Shen Shifei, Aleksandar Jovanovic