Materials engineering topic list of research papers
-
Stress State Analysis of Iosipescu Shear Specimens for Aerogel Composite with Different Properties in Tension and Compression
Abstract The objective of present research is to establish guidelines for preparing shear tests of ceramic-fiber-reinforced aerogel. The aerogel composite prepared by Sol-gel methods exhibits bi-modulus properties under tension and compression...
2014 / Y.T. Sun, D.Q. Shi, X.G. Yang, C.H. Mi, J. Feng, et al. -
On row-structures in sheared polypropylene and a propylene–ethylene copolymer
Abstract The crystallisation of polymers such as polyethylene or polypropylene from the melt is greatly influenced by the flow-thermal history prior to the crystallisation. We explore the influence of the chemical configuration of polypropylene...
2014 / Robert H. Olley, Geoffrey R. Mitchell, Yasmin Moghaddam -
Vortex States of Exfoliated Bi2Sr2CaCu2O8+y Thin Films with and without Micro-Hole Array
Abstract To investigate vortex states in exfoliated Bi2Sr2CaCu2O8+y high-Tc superconductor with and without micro-hole arrays, the in-plane resistance in the vortex states has been measured. In exploration of vortex-lattice melting transition in...
2013 / S. Ooi, T. Mochiku, M. Tachiki, K. Hirata -
Quantitative Evidence of Reaction during Hypervelocity Penetration of Aluminum through Oxygenated Fluids
Abstract Qualitative evidence of chemical reactions between combustible metal shaped charges in air and water has previously been reported based on high-speed photography, spectroscopy, and calorimetry. This report covers investigations directed...
2013 / Joseph Moore, Christoph Gloßner, William Craig, Marek Dolak, Max Peters, et al. -
Measurement of Heat of CO2 Absorption into 2-Amino-2-methyl-1-propanol (AMP)/Piperazine (PZ) Blends Using Differential Reaction Calorimeter
Abstract In this work, a Differential Reaction Calorimeter (DRC) was used to measure differential heats of CO2 absorption into aqueous solutions of 2-amino-2-methyl-1-propanol (AMP) + piperazine (PZ) blend. The measurement was carried out at 40, 60, ...
2013 / Qian Xie, Adisorn Aroonwilas, Amornvadee Veawab -
Space vs. Chemical Domains: Virtual and Real Simulation to Increase Safety in Extreme Contexts
Abstract Each year, millions of people are injured in the work place. Preventing injuries and thus protecting the health of people working in extremely dangerous contexts is of paramount importance. Outer Space is the environment that presents the...
2015 / Irene Lia Schlacht, Salman Nazir, Davide Manca -
Detection of Damage of Rotor-bearing Systems Using Experimental Data Analysis
Abstract Rolling element bearings are critical components and widely used in many rotating machines such as automobiles, aerospace, weaving, machine tools that frequently fail. The vibration of the bearing-rotor influences the security, performance...
2016 / R.G. Desavale, Asmita R. Mali -
Velocity Statistics in Quantum Turbulence
Abstract Quantum turbulence in thermal counterflow of superfluid 4He is studied at length scales comparable to the average distance R between quantized vortices. The Lagrangian velocities of micrometer-sized deuterium particles, smaller here than R, ...
2013 / M. La Mantia, D. Duda, M. Rotter, L. Skrbek -
Effects of slab geometry and obliquity on the interplate thermal regime associated with the subduction of three-dimensionally curved oceanic plates
Abstract We investigated the relationships among slab geometry, obliquity, and the thermal regime associated with the subduction of oceanic plates using a three-dimensional (3D) parallelepiped thermal convection model. Various models with convex and ...
2014 / Yingfeng Ji, Shoichi Yoshioka -
Battery boost comes from X-ray studies2013 / David Bradley
-
Remanufacturing with ECH – A Concept
Abstract A concept of remanufacturing is develops for expensive saving for new components. The cost of spare parts for aerospace and automobile engine are very high, in many cases repair of parts is cost effective. A lot of components are reused,...
2014 / Harpreet Singh, Pramod Kumar Jain -
Setup of Galvanic Sensors for the Monitoring of Gilded Bronzes2014 / Sara Goidanich, Davide Gulotta, Laura Brambilla, Ruben Beltrami, Paola Fermo, et al.
-
Implementation of Suitable Comfort Model for Posture and Motion Prediction in DHM Supported Vehicle Design
Abstract Driver-vehicle interaction analyses are done to ensure a successful vehicle design from an ergonomics perspective. Digital Human Modelling (DHM) tools are often used to support such verifications, particularly at early stages of the product ...
2015 / Christian Bergman, Pamela Ruiz Castro, Dan Högberg, Lars Hanson -
Atomic picture of elastic deformation in a metallic glass2015 / X. D. Wang, S. Aryal, C. Zhong, W. Y. Ching, H. W. Sheng, et al.
-
Pyroelectric Harvesters for Generating Cyclic Energy2015 / Chun-Ching Hsiao, Jia-Wai Jhang
-
Microstructure Analysis of Ti-xPt Alloys and the Effect of Pt Content on the Mechanical Properties and Corrosion Behavior of Ti Alloys2014 / Ho-Jun Song, Mi-Kyung Han, Hyeon-Gyeong Jeong, Yong-Tai Lee, Yeong-Joon Park
-
Mechanical Behavior of BFRP-Steel Composite Plate under Axial Tension2014 / Yunyu Li, Yanlei Wang, Jinping Ou
-
Energy Analysis of Ship Energy Systems – The Case of a Chemical Tanker
Abstract Improved understanding of ship energy use can be a crucial part of the process of increasing ship energy efficiency. In this paper, the methodology of energy analysis is applied to ship energy systems in order to showcase the benefits of...
2015 / Francesco Baldi, Hannes Johnson, Cecilia Gabrielii, Karin Andersson -
Establishment of Three Components of Biomass Pyrolysis Yield Model
Abstract Based on the chemical process simulation software Aspen Plus, the biomass pyrolysis model was established by Ryield reactor. In the Ryield reactor, a compiled fortran subroutine was embedded to calculate the yield of reaction product. With...
2015 / Xing Xianjun, Sun Zongkang, Ma Peiyong, Yu jin, Wu zhaobin -
Heat Transfer Performance of Nanofluid in a Complicated Cavity Due to Prandtl Number Variation
Abstract A numerical investigation is presented for the natural convective flow and thermal behaviors of nanofluid inside a complicated enclosure due to Prandtl number variation. The cavity consists of a centered heated diamond shaped hollow...
2014 / Salma parvin, Rehena Nasrin, M.A. Alim