Materials engineering topic list of research papers
-
Displacement–length scaling of brittle faults in ductile shear
Abstract Within a low-grade ductile shear zone, we investigated exceptionally well exposed brittle faults, which accumulated antithetic slip and rotated into the shearing direction. The foliation planes of the mylonitic host rock intersect the...
2011 / Bernhard Grasemann, Ulrike Exner, Cornelius Tschegg -
E-J Characteristic of 2G YBCO Coated Conductor Tapes at Different Temperatures
Abstract The E-J characteristics of High temperature superconducting (HTS) composite are not only fundamental to the understanding of flux dynamics and flux pinning but also the quench behaviour of HTS at an extended temperature range. The present...
2012 / I. Falorio, E.A. Young, Y. Yang -
Advances in Atomic Gyroscopes: A View from Inertial Navigation Applications2012 / JianCheng Fang, Jie Qin
-
Suppressing the formation of SRZ in a Ni-based single crystal superalloy by RuNiAl diffusion barrier
Abstract NiAl-based bond coats applied in thermal barrier coating (TBC) systems containing Ru and Pt have been studied in recent years. Interdiffusion between the coatings and the underlying superalloy substrates usually results in degradation of...
2012 / Zhiming Bai, Dongqing Li, Hui Peng, Juan Wang, Hongbo Guo, et al. -
Sodium current of neurosecretory cells in the eyestalk from the shrimp Penaeus japonicus
Abstract The properties of the inward current of medulla terminalis-X-organ (MTXO) cells isolated from the Penaeus japonicus eyestalk were studied with the whole-cell clamp technique in the presence of Ca2+ and K+ channel blockers. The inward...
2009 / Jinshen Liu, Shiying Li, Haihui Ye, Guizhong Wang -
Calibration of the HSPF model with a new coupled FTABLE generation method
Abstract The hydrological simulation program FORTRAN (HSPF) is a comprehensive watershed model designed to simulate water quantity and quality processes. It is used widely throughout the world. Calculating discharge from a stream reach by HSPF is...
2009 / Jing Zhang, Mark Ross, Ken Trout, Demin Zhou -
Three-dimensional investigation of velocity skin effect in U-shaped solid armature
Abstract A three-dimensional transient computational model is applied to investigate the velocity skin effect (VSE) in a U-shaped solid armature. With this model, current and heat transport in the armature can be evaluated accurately. The results...
2008 / Xin Li, Chunsheng Weng -
Global Sensitivity Analysis of the Process-Based Wheat Simulation Model SiriusQuality1 Identifies Key Genotypic Parameters and Unravels Parameters Interactions
Abstract Improving crop performance to satisfy an increasing demand for agricultural products is a constant challenge to plant scientists. The recent improvements of process-based simulation models offer new avenues to explore variations of genetic...
2010 / Jianqiang He, Pierre Stratonovitch, Vincent Allard, Mikhail A. Semenov, Pierre Martre -
The dissociated properties of dislocation in two-dimensional triangular lattice2008 / Wu Xiaozhi, Wang Shaofeng, Zhang Huili
-
Orientation relationship and interfaces in Ni and Co-YSZ cermets prepared from directionally solidified eutectics2009 / Angel Larrea, Miguel Laguna-Bercero, José Peña, Rosa Merino, VÃctor Orera
-
Wind Turbine Blade Design2012 / Peter J. Schubel, Richard J. Crossley
-
Mechanical, Thermal and Chemical Durability Behaviors of CdO-Bi<sub>2</sub>O<sub>3</sub> Boro-Phosphate Glasses Containing Fe<sub>2</sub>O<sub>3</sub>2013 / Heba A. Saudy, Sawsan El Mosallamy, Samir U. El Kameesy, Nashwa Sheta, Ahmed G. Mostafa, et al.
-
Perspectives on thermoelectrics: from fundamentals to device applications2011 / M. Zebarjadi, K. Esfarjani, M. S. Dresselhaus, Z. F. Ren, G. Chen
-
Influence of Electro Discharge Machining of Biodegradable Magnesium on the Biocompatibility
Abstract Biodegradable implants are in the focus of recent research approaches in the medical engineering sector for the treatment of many different defects. In comparison to permanent implants the risk of inflammatory reactions is significantly...
2013 / F. Klocke, M. Schwade, A. Klink, D. Veselovac, A. Kopp -
A Modified Marriage in Honey-Bee Optimization for Function Optimization Problems
Abstract Many researches have implemented a genetic algorithm with real-coded chromosomes to solve a wide variety of problems. Their experimental results suggested that the real-coded genetic algorithms gave superior results to binary-coded genetic...
2011 / Patcharawadee Poolsamran, Arit Thammano -
Investigation on the origin of switching field width in Co-Pt dot array
Abstract The switching field width (SFW) in bit-patterned media is one of the important factors affecting the recording performance. The origin of SFW in Co80Pt20 magnetic dot array patterned by electron beam lithography was investigated. The SFWs...
2011 / Yuji Kondo, Jun Ariake, Takashi Chiba, Kaori Taguchi, Motohiro Suzuki, et al. -
Incremental Particle Swarm Optimization
Abstract By simulating the population size of the human evolution, a PSO algorithm with increment of particle size (IPPSO) was proposed. Without changing the PSO operations, IPPSO can obtain better solutions with less time cost by modifying the...
2012 / Xiaohua Xu, Zhoujin Pan, Yanqiu Xi, Ling Chen -
Effect of Modulation Period on the Structure and Mechanical Properties of Nanoscale W/ZrB2 Multilayered Coatings
Abstract Nanoscale W/ZrB2 multilayered coatings were prepared by rf magnetron sputtering system at room temperature. SEM, XRD, surface profiler and nano-indenter were employed to investigate the influences of modulation period (Λ) on the...
2011 / G.Q. Liu, Y.B. Kang, H.Y. Wang, F.Y. Xue, X.Y. Deng, et al. -
The Control System Design of Rotary Li/MnO2 Button Battery Product Line Based on Human-computer interface
Abstract In this paper, human-computer interaction was applied as the main features. Human-computer interface programs and programmable logic controller (plc) programs were combined application and address matching and the same address communication ...
2012 / Qi Xiangyang, Lin Shuzhong, Sun Lixin -
An ARM-based Environment for Combine Harvester Process Monitor via CAN Bus
Abstract Combine harvester is one of the most complex agricultural machinery during field operation. To obtain maximal capacity and better performance, a controller area network (CAN bus) based monitor system was constructed and tested. The...
2011 / Du Chen, Shumao Wang, Yongjun Zheng