Materials engineering topic list of research papers
-
Contribution of Process Annealing on the Development of Microstructure and Texture of Cu-30Zn Brass2013 / S. Hagos, A. K. Verma, Prantik Mukhopadhyay, A. K. Singh
-
Defect Study of MgO-CaO Material Doped with CeO22013 / Han Zhang, Huizhong Zhao, Jinfeng Chen, Jingjie Li, Jun Yu, et al.
-
Gas Sensitivity Enhancement of WO3 Nano-rods by Gold Nanoparticles
Abstract Tungsten oxide nano-rods were prepared by acidic precipitation from sodium tungstate solution and sensitized with gold nanoparticles prepared by Turkevich method from tetrachloroauric acid trihydrate. In order to prevent aggregation the...
2015 / M. Takács, D. Zámbó, A. Deák, A.E. Pap, I. Bársony -
Two-dimensional Green's functions for fluid and thermoelastic two-phase plane2013 / Peng-Fei Hou, Jie Tong, Qiu-Hua Li
-
Localized Corrosion Growth Kinetics in AA2024 Alloys2002 / Weilong Zhang, G. S. Frankel
-
The 25th Santa Fe Symposium on Jewelry Manufacturing Technology2011 / Christopher W. Corti
-
Design and commissioning of a semi-confined blast chamber
Abstract This paper presents the design, test and analysis of a scaled cylindrical blast chamber. The blast chamber is a one-fifth dimensional size replica of the full-scale blast chamber (Emily). The blast chamber is semi-confined as one end is...
2016 / I.M. Snyman, F.J. Mostert, W. Grundling -
Low hysteresis and large room temperature magnetocaloric effect of Gd5Si2.05−xGe1.95−xNi2x (2x = 0.08, 0.1) alloys2013 / X. C. Zhong, J. X. Min, Z. W. Liu, Z. G. Zheng, D. C. Zeng, et al.
-
Fracturing damage process in dynamic split experiments of a brittle glass
Abstract In this study, the 3-dimensional discrete element method is firstly introduced to explain the fracturing damage process of the dynamic split experiment of a special brittle glass ZnS. The corresponding dynamic split experiment is also...
2012 / Ning Cui, Linmao Ye, Kaixin Liu -
Laser plasma x-ray contact microscopy of living specimens using a chemically amplified epoxy resist2002 / A. C. Cefalas, P. Argitis, Z. Kollia, E. Sarantopoulou, T. W. Ford, et al.
-
Pressure and tension effects on mechanical properties of ZrAl22014 / Pinliang Zhang, Fanchen Meng, Zizheng Gong, Guangfu Ji, Jinke Yang, et al.
-
Au-free InAs nanowires grown in In-particle-assisted vapor-liquid-solid mode: growth, structure, and electrical property2013 / Guoqiang Zhang, Satoshi Sasaki, Kouta Tateno, Hideki Gotoh, Tetsuomi Sogawa
-
Temperature-controlled growth of single-crystal Pt nanowire arrays for high performance catalyst electrodes in polymer electrolyte fuel cells
Abstract The anisotropic structure and unique surface properties of one-dimensional (1D) Pt-nanowire (PtNW) make it a promising new type of electrocatalyst for various catalyst applications, especially for fuel cells. However, due to the critical...
2014 / Yaxiang Lu, Shangfeng Du, Robert Steinberger-Wilckens -
The influence of tin implantation on the oxidation of iron2003 / I. J. R. Baumvol
-
Predictability of Impact Force Localization by Using the Optimization Technique
Abstract This work focuses on the analysis of some parameters that govern convergence of an adapted version of Particle Swarm Optimization and genetic algorithm which are used for identifying location of an impact occurring on an elastic beam...
2016 / Abdelali El-Bakari, Sara Teidj, Abdellatif Khamlichi, Eric Jacquelin -
Lithium fluoride injection layers can form quasi-Ohmic contacts for both holes and electrons2014 / Benjamin F. Bory, Paulo R. F. Rocha, René A. J. Janssen, Henrique L. Gomes, Dago M. De Leeuw, et al.
-
Fly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent2012 / Mohd Mustafa Al Bakri Abdullah, Kamarudin Hussin, Mohamed Bnhussain, Khairul Nizar Ismail, Zarina Yahya, et al.
-
Fiber Loop Ringdown Sensor for Potential Real-Time Monitoring of Cracks in Concrete Structures: An Exploratory Study2012 / Peeyush Sahay, Malik Kaya, Chuji Wang
-
Mechanical Behavior of Nitrided 316L Austenitic Stainless Steel Coated with a:C-H-Si
Abstract The austenitic stainless steel AISI 316L is used in chemical and other industries due to its good corrosion properties; however, it has a poor wear resistance. Plasma assisted treatments such as diffusion process and/or coatings can be used ...
2015 / E.L. Dalibon, D. Heim, Ch. Forsich, S.P. Brühl -
CFD Simulations and Experimental Verification on Nucleate Pool Boiling of Liquid Nitrogen
Abstract To explore the mechanism of nucleate pool boiling of cryogenic fluids, an experimental apparatus was built to conduct a visualization study and verify the CFD boiling model. Apart from the general measurements of the super-heat and heat...
2015 / Zhang Xiaobin, Xiong Wei, Chen Jianye, Wang Yuchen, K. Tang