Materials engineering topic list of research papers
-
Effect of annealing conditions on the perpendicular magnetic anisotropy of Ta/CoFeB/MgO multilayers2016 / Yan Liu, Liang Hao, Jiangwei Cao
-
Printed Piezoelectric Materials for Vibration-based Damage Detection
Abstract Piezoelectric materials are of high interest for many applications, e.g. vibrations measurement, active vibration control or vibration-based damage detection in Structural Health Monitoring (SHM). In this paper, thin electroded...
2017 / H. Debéda, C. Lucat, V. Pommier-Budinger -
High performance of SDC and GDC core shell type composite electrolytes using methane as a fuel for low temperature SOFC2016 / Muneeb Irshad, Khurram Siraj, Rizwan Raza, Fayyaz Javed, Muhammad Ahsan, et al.
-
Orographic Shading Effect on Water/Sediment Heat Exchange in Two Dams of Guanajuato River, Mexico
Abstract Heat fluxes in dams affect the concentrations of dissolved oxygen and the liberation of potentially toxic elements (Fe, Mn, As and sulfides) from sediments. Sediments/water column heat exchange in dams traditionally is neglected by...
2017 / Jofre-Meléndez Rodolfo, Ramos-Arroyo Yann, Botello-Rionda Salvador -
Orthotropic Laminated Open-cell Frameworks Retaining Strong Auxeticity under Large Uniaxial Loading2017 / Hiro Tanaka, Kaito Suga, Naoki Iwata, Yoji Shibutani
-
Potential uses of natural zeolites for the development of new materials: short review2016 / V. Petranovskii, F. Chaves-Rivas, M.A. Hernandez Espinoza, A. Pestryakov, E. Kolobova
-
Mechanical properties and biocompatibility of polymer infiltrated sodium aluminum silicate restorative composites2017 / Huining Wang, Bencang Cui, Jing Li, Shu Li, Yuanhua Lin, et al.
-
Electrochemical properties of LaFeO3-rGO composite
Abstract LaFeO3-xwt% rGO composite (x = 8, 10, 12) was synthesized by ultraphonic stirring and lyophilization method. SEM, TEM and XRD results show that the perovskite-type LaFeO3 was dispersed by rGO to form special porous structure due to the...
2017 / Yongjie Yuan, Zhentao Dong, Yuan Li, Lu Zhang, Yumeng Zhao, et al. -
Simulation of oxidation-nitridation-induced microstructural degradation in a cracked Ni-based superalloy at high temperature2014 / Kang Yuan, Ru Lin Peng, Xin-Hai Li, Sten Johansson, Yan-Dong Wang
-
A PCB Based Engine Air Intake Sensor – Application to a Typical Low Power Engine
Abstract This work concerns the evaluation of a novel sensor for determining the air intake of a typical low power engine. The sensor is based on PCB technology enabling effective thermal isolation and direct communication to the macroworld. The...
2017 / Dimitrios N. Pagonis, Anastasios Moschos, Grigoris Kaltsas -
The structure and mechanical property of silane-grafted-polyethylene/SiO2 nanocomposite fiber rope
Abstract The effect of vinyltrimethoxysilane (VTMS) graft and SiO2 on the structure and mechanical properties of silane-grafted-polyethylene/SiO2 (VTMS-g-PE/SiO2) nanocomposite fibers and ropes was studied. Scanning electron microscopy (SEM),...
2017 / Wenwen Yu, Jiangao Shi, Lumin Wang, Xiaoxue Chen, Minghua Min, et al. -
Hybrid Multi-objective Optimization Method for Solving Simultaneously the line Balancing, Equipment and Buffer Sizing Problems for Hybrid Assembly Systems
Abstract In today's dynamic and uncertain markets, companies are required to regularly renew their product and process platforms through new production technologies and factory infrastructure. This results in shortening products’, processes’ and...
2017 / Jonathan Oesterle, Thomas Bauernhansl, Lionel Amodeo -
Strategy for selecting an optimal propulsion system of a liquefied hydrogen tanker
Abstract This study proposed a strategy for selecting an optimal propulsion system of a liquefied hydrogen tanker. Four propulsion system options were conceivable depending on whether the hydrogen BOG (boil-off gas) from the cryogenic cargo tanks...
2017 / Junkeon Ahn, Hwalong You, Jiheon Ryu, Daejun Chang -
Weldability, machinability and surfacing of commercial duplex stainless steel AISI2205 for marine applications – A recent review
Abstract In the present review, attempts have been made to analyze the metallurgical, mechanical, and corrosion properties of commercial marine alloy duplex stainless steel AISI 2205 with special reference to its weldability, machinability, and...
2017 / A. Vinoth Jebaraj, L. Ajaykumar, C.R. Deepak, K.V.V. Aditya -
Safety of Workers in Indian Mines: Study, Analysis, and Prediction
Abstract Background The mining industry is known worldwide for its highly risky and hazardous working environment. Technological advancement in ore extraction techniques for proliferation of production levels has caused further...
2017 / Shikha Verma, Sharad Chaudhari -
Thermal conductivity, electrical conductivity, and thermoelectric properties of CdTe and Cd0.8Zn0.2Te crystals between room temperature and 780oC2015 / Ching-Hua Su
-
NDIR Ethanol Gas Sensor with Two Elliptical Optical Structures
Abstract A unique elliptical structure is designed and prototyped for a nondispersive infrared (NDIR) ethanol gas sensor. A temperature compensation method is also derived for this structure, in this study. The initial output voltages of the...
2017 / JinHo Kim, KeunHeon Lee, SeungHwan Yi -
Study on Productivity Numerical Simulation of Highly Deviated and Fractured Wells in Deep Oil and Gas Reservoirs2016 / Liangchuan Li, Jianyi Huang, Cheng Luo, Fanglan Du, Yi Liu
-
3D metal droplet printing development and advanced materials additive manufacturing
Abstract While commercial additive manufacturing processes involving direct metal wire or powder deposition along with powder bed fusion technologies using laser and electron beam melting have proliferated over the past decade, inkjet printing using ...
2017 / Lawrence E. Murr, Wayne L. Johnson -
Review of using gallium nitride for ionizing radiation detection2015 / Jinghui Wang, Padhraic Mulligan, Leonard Brillson, Lei R. Cao