Materials engineering topic list of research papers
-
Oxidation Behavior of a SPS Sintered ZrB2-SiC-MoSi2Ceramic at 1500 °C2016 / Qi Li, Lamei Cao, Xiaosu Yi
-
Design and Development of a Landmines Removal Robot2012 / K.T.M.U. Hemapala, Roberto P.
-
Experiments and Model for Serration Statistics in Low-Entropy, Medium-Entropy, and High-Entropy Alloys2015 / Robert Carroll, Chi Lee, Che-Wei Tsai, Jien-Wei Yeh, James Antonaglia, et al.
-
Total Ionizing Dose, Random Dopant Fluctuations, and its combined effect in the 45nm PDSOI node
Abstract Total Ionizing Dose and Random Dopant Fluctuation simulations in 45nm Partially Depleted Silicon-on-Insulator nMOSFETs are presented. Calibration is done according to the commercial IBM 45nm technology node. The importance of the bottom...
2016 / Eleni Chatzikyriakou, William Redman-White, C.H. De Groot -
Automated Dressing of Graphite Electrodes for Electrical Discharge Machining (EDM) of Seal Slots in Turbine Components
Abstract The die-sinking EDM is applied in the aerospace industry for the machining of seal slots in blades and in structural components made of nickel-base alloys, normally applying graphite electrodes. The objective of this work was the...
2016 / Eckart Uhlmann, David C. Domingos -
Non-destructive mapping of grain orientations in 3D by laboratory X-ray microscopy2015 / S. A. McDonald, P. Reischig, C. Holzner, E. M. Lauridsen, P. J. Withers, et al.
-
Metal–organic frameworks: The future of low-κ materials2016 / Muhammad Usman, Kuang-Lieh Lu
-
Comparative Environmental Analysis of Microbial Electrochemical Systems
Abstract Role of biobased fuel production takes a special role at international and European level. Microbial electrochemical systems (MEC– microbial electrolysis cell and MFC – microbial fuel cell) have a great energy production potential in...
2016 / Edgars Francmanis, Asset Khabdullin, Arman Khabdullin, Zauresh Khabdullina, Guldana Khabdullina, et al. -
The roles of thermal insulation and heat storage in the energy performance of the wall materials: a simulation study2016 / Linshuang Long, Hong Ye
-
High energy X-ray phase and dark-field imaging using a random absorption mask2016 / Hongchang Wang, Yogesh Kashyap, Biao Cai, Kawal Sawhney
-
Improved understanding of environment-induced cracking (EIC) of sensitized 5XXX series aluminium alloys
Abstract Two mechanistically different modes of EIC have been identified using high-resolution X-ray computed tomography and scanning electron microscopy (SEM) in sensitized AA5083-H131 that had been pre-exposed to 0.6M NaCl prior to interrupted...
2016 / N.J.H. Holroyd, T.L. Burnett, M. Seifi, J.J. Lewandowski -
Numerical Heat Transfer Investigation in a Heat Exchanger Tube with Hexagonal Conical-ring Inserts
Abstract The hexagonal conical rings (HCR) modified from the typical conical ring (CR) are used as a turbulence promoter for producing the vortex flows to enhance the heat transfer rate in a heat exchanger tube. To reduce the pressure loss, the...
2016 / Somchai Sripattanapipat, Sombat Tamna, Nuthvipa Jayranaiwachira, Pongjet Promvonge -
Green Coal: A New Energy Source from Leaves
Abstract Pollution is a major concern with fossil fuels. Present work would like to discuss a “Green Fuel” produced from waste leaves on the ground; hence it could be considered eco-friendly. The objective is to use leaves (biomass) as raw materials ...
2016 / K. Malak, C. de la Seiglière, C. Fernández, M. Swaminathan, A. Sebastián, et al. -
Degenerate seaweed to tilted dendrite transition and their growth dynamics in directional solidification of non-axially oriented crystals: a phase-field study2016 / Hui Xing, Xianglei Dong, Hongjing Wu, Guanhua Hao, Jianyuan Wang, et al.
-
Fast Triggering of Shape Memory Polymers using an Embedded Carbon Nanotube Sponge Network2016 / Guoxiang Zhou, Heng Zhang, Shuping Xu, Xuchun Gui, Hongqiu Wei, et al.
-
Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application2016 / H. F. Li, K. J. Qiu, F. Y. Zhou, L. Li, Y. F. Zheng
-
Tunable elastodynamic band gaps
Abstract The effect of nonlinear elastic pre-stress on coupled compressional and vertically polarised shear elastic wave propagation in a two-dimensional periodic structure is investigated. The medium consists of cylindrical annuli embedded on a...
2016 / Ellis G. Barnwell, William J. Parnell, I. David Abrahams -
Impact of Solar Panel Orientation on Large Scale Rooftop Solar Photovoltaic Scenario for Mumbai
Abstract Application of solar photovoltaic systems at a large scale is becoming increasingly interesting for researchers, policymakers and investors. Singh and Banerjee (2015) [1] have presented a methodology for estimation of the rooftop solar...
2016 / Rhythm Singh, Rangan Banerjee -
Radiation degradation characteristics of component subcells in inverted metamorphic triple-junction solar cells irradiated with electrons and protons2016 / Mitsuru Imaizumi, Tetsuya Nakamura, Tatsuya Takamoto, Takeshi Ohshima, Michio Tajima
-
Deformation twinning induced decomposition of lamellar LPSO structure and its re-precipitation in an Mg-Zn-Y alloy2016 / X. H. Shao, S. J. Zheng, D. Chen, Q. Q. Jin, Z. Z. Peng, et al.