Materials engineering topic list of research papers
-
A 3D Numerical Model for the Optimization of Running Tracks Performance
Abstract In previous works, a finite element model of the shock absorbing characteristics of athletics tracks was developed, able to give sufficiently reliable predictions from laboratory tests performed on suitable material samples. The model...
2016 / L. Andena, S. Aleo, F. Caimmi, S. Mariani, F. Briatico-Vangosa, et al. -
Biodegradable Mg-Cu alloys with enhanced osteogenesis, angiogenesis, and long-lasting antibacterial effects2016 / Chen Liu, Xuekun Fu, Haobo Pan, Peng Wan, Lei Wang, et al.
-
Catalytic Adaro Coal Gasification Using Dolomite and Nickel as Catalysts
Abstract Integrated Gasification Combined Cycle (IGCC) is an Advanced Clean Coal Technology and can be used as an option for future TNB coal-fired power plant. The implementation of this technology is expected to reduce Green House Gas emissions...
2016 / N.F. Othman, M.H. Bosrooh -
All-hazard Guide for Transport Infrastructure
Abstract The paper presents a new assessment methodology for owners and operators of transport infrastructure based on the results of the project “All-Hazard-Guide for Transport Infrastructure” – being funded by the European Commission DG General...
2016 / Ingo Kaundinya, Selcuk Nisancioglu, Harald Kammerer, Rita Oliva -
Effect of second-phase particles on the properties of W-based materials under high-heat loading
Abstract W, W-TaC, and W-TiC materials were subjected to heat–load tests in an electron beam facility (10keV, 8kW) at 100 pulses. After heat loading, severe cracks and plastic deformation were detected on the surface of pure W materials. However,...
2016 / Xiao–Yue Tan, Ping Li, Lai–Ma Luo, Qiu Xu, Kazutoshi Tokunaga, et al. -
Lifecycle Optimization in the Refrigeration Industry: A Decision-support Simulation Toolbox (DSST)
Abstract This paper presents a set of intermediate results related to the ELICiT project, whose purpose is the application of magnetic cooling technology within domestic refrigeration appliances. An innovative Simulation Toolbox, able to offer a...
2016 / Daniele Cerri, Rossella Luglietti, Paolo Rosa, Sergio Terzi -
Learning in Product Development: Proposed Industry Experiment Using Reflective Prototyping
Abstract This article discusses the aspect of learning activities in product development by leveraging a strategy for capturing and transferring tacit knowledge through the extensive use of reflective prototyping. With the overall aim of finding new ...
2016 / Jorgen A.B. Erichsen, Andreas L. Pedersen, Martin Steinert, Torgeir Welo -
Intrinsic magnetic properties of single-phase Mn1+xGa (0 < x < 1) alloys2015 / Q. M. Lu, M. Yue, H. G. Zhang, M. L. Wang, F. Yu, et al.
-
Ring Based Planar Crossover for Beamforming Networks
Abstract A crossover maintains signal integrity when transmission lines overlap. In this paper, a microstrip patch is used to design the overlapping region thus providing desired isolation and transmission between desired ports. Square and Circular...
2016 / V.M. Jayakrishnan, Sreedevi K. Menon -
Feasibility and Performance Studies of a Semi Active Journal Bearing
Abstract In this paper, details related to preliminary efforts made towards developing a novel semi-active journal bearing have been presented. The study which is predominantly experimental in nature uses a test rig designed and fabricated for the...
2016 / Raghu Yogaraju, L. Ravikumar, G. Saravanakumar, C. Shravankumar, V. Arun Kumar -
Two-Phase Flow Field Simulation of Horizontal Steam Generators
Abstract The analysis of steam generators as an interface between primary and secondary circuits in light water nuclear power plants is crucial in terms of safety and design issues. VVER-1000 nuclear power plants use horizontal steam generators...
2016 / Ataollah Rabiee, Amir Hossein Kamalinia, Kamal Hadad -
Effect of Gum Arabic Karroo as a water-reducing admixture in cement mortar
Abstract The aim of this study was to develop Gum Acacia Karroo (GAK) as set retarding-water reducing admixture in cement mortars. Retarding admixtures are used to counter effect the accelerated hydration of cement at elevated temperatures by...
2016 / Rose Mbugua, Ramadhan Salim, Julius Ndambuki -
Disperse Reinforcing Role in Producing Non-autoclaved Cellular Foam Concrete
Abstract Cellular concretes have become promising materials for the construction. The increase in the cost of energy resources, the thermo technical requirements for enclosing structures, a simple enough technology, the ability to obtaining...
2016 / L.M. Vesova -
Rheological Behaviour of Graphene Nano-sheets in Hydrogenated Oil-based Drilling Fluid
Abstract An experimental investigation has been carried out to investigate the rheological effect of hydrogenated oil-based drilling fluid when dispersed with graphene nano-sheets. The rheological aspects that were investigated were viscosity and...
2016 / Chai Yee Ho, Suzana Yusup, Chok Vui Soon, Mohamad Taufiq Arpin -
Design and Manufacturing of the Linko Demountable Fabric Pavilion for the Motorsport Sector
Abstract This paper offers a detailed overview of the design and manufacturing aspects faced during the design and construction of the temporary pavilion for Linko Resources Ltd. The pavilion has been designed for the motorsport season 2015 and is...
2016 / Paolo Beccarelli, Roberto Maffei -
Tensile properties and hardness of two types of 11Cr-ferritic/martensitic steel after aging up to 45,000 h
Abstract The relationship among tensile strength, Vickers hardness and dislocation density for two types of 11Cr-ferritic/martensitic steel (PNC-FMS) was investigated after aging at temperatures between 400 and 800°C up to 45,000h and after neutron...
2016 / Y. Yano, T. Tanno, Y. Sekio, H. Oka, S. Ohtsuka, et al. -
Unprecedented Structural Skins. Experiments towards an Intelligent Tensegrity Skin
Abstract Pin-jointed prestressable structures -known as tensegrity systems- have been largely studied for over six decades, untouched in their complexity and fascination. Prior research has marginally offered interactive toolsets to design...
2016 / Alberto Campesato -
Investigation of optical gain in Eu-doped GaN thin film grown by OMVPE method
Abstract We prepare and optically characterize a thin film of GaN:Eu. Room temperature intense emission band at around 620 nm is observed, corresponding to 5D0 → 7F2 electronic dipole transition of Eu3+ ions in the GaN host material. At lower...
2016 / Ngo Ngoc Ha, Atsushi Nishikawa, Yasufumi Fujiwara, Tom Gregorkiewicz -
Engineering Challenges for detectors at the ILC
Abstract Over the last years two proposals for experiments at the ILC have been developed, ILD and SID. Extensive R&D has been carried out around the world to develop the needed technologies. Furthermore a first round of engineering studies was...
2016 / Marco Oriunno -
Why the Upgradability is a Present-day Opportunity for Designing Sustainable Systems?
Abstract The accelerating rhythm of products renewal causes accelerated exploitation of materials and energy. To remedy this, this paper considers upgradability from the point of view of functionality: the goal is to design an upgrade scenario...
2016 / O. Pialot, D. Millet