Materials engineering topic list of research papers
-
Numerical Study on the Ablation Effects of Tungsten Irradiated by High-intensity Pulsed Ion Beam
Abstract Based on the ion current density model of TEMP type ion beam accelerator, and utilizing the deposited energy of the high-intensity pulsed ion beam (HIPIB) in tungsten by Monte Carlo method as source term, a two-dimensional thermal...
2011 / Di Wu, Mingkai Lei, Xiaopeng Zhu, Ye Gong -
Optical design for the DLP pocket projector using LED light source
Abstract The DLP [1] pocket projector can be classified into two parts according to design characteristic. One of them is illumination system. It composes of Red, Green and Blue LEDs. Each of them has a collimator to make lights illuminate dichroic...
2011 / Wen-Shing Sun, Yen-Chen Chiang, Chih-Hsuan Tsuei -
Design and Numerical Simulation of Novel Reentrant Microwave Cavity
Abstract Microwave plasma chemical vapor deposition (MPCVD) has gained considerable importance due to the capability of producing high quality diamond film, microwave cavity is one key factor for improving the techniques. Reentrant cavities with...
2011 / XiaoJing Li, ShunQi Zheng, BaoRong Zhao, XiWen Zhang, WeiZhong Tang -
Influences to System and Superiority of Model Parameters in Dynamic Setting AGC
Abstract Dynamic setting AGC is based on the improvement of the BISRA-AGC model. Based on the control algorithms and control models of dynamic setting AGC, the influences of the model parameters to system performance were analyzed using the GUI in...
2011 / LI Xu, Zhang Hao-yu, Zhang Jin, Guo Jian-fei, Liu Cui-hong, et al. -
Wick Sintered Temperature Forecasting Based on Support Vector Machines with Simulated Annealing
Abstract The law of sintering temperature’ changing during resistance furnace sintering is the very important technology information. Support vector machines (SVMs) have been successfully employed to solve nonlinear regression and time series...
2012 / Zeng Dehuai, Liu Yuan, Jiang Lianbo, Li Li, Xu Gang -
Study Progress on Tissue Culture of Maize Mature Embryo
Abstract It has been paid more and more attention on maize tissue culture as it is a basic work in maize genetic transformation, especially huge breakthrough has been made in maize tissue culture utilizing mature embryos as explants in the recent...
2012 / Hongzhen Wang, Jun Cheng, Yanping Cheng, Xioafu Zhou -
Effects of Aging Temperature on Electrical Conductivity and Hardness of Cu-3 at. pct Ti Alloy Aged in a Hydrogen Atmosphere2011 / Satoshi Semboshi, Tomoya Nishida, Hiroshi Numakura, Tala’at Al-Kassab, Reiner Kirchheim
-
Thermal Energy Storage by PCM-air Heat Exchangers: Temperature Maintenance in a Room
Abstract This paper describes how to design a PCM-air heat exchanger once an application is specified. Free-cooling and temperature maintenance in rooms with special requirements possess high potential for PCM application in different countries...
2012 / Pablo Doladoa, Ana Lazaro, Monica Delgado, Conchita Peñalosa, Javier Mazo, et al. -
Study on Hydrogen Production Potential Utilizing Leachate from Aerobic Bio-Leaching Bed Fed with Napiergrass and Kitchen Waste
Abstract Cellulose hydrolysis is rate-limiting step in bioprocess and a long hydraulic retention time is necessary for microbial digestion in anaerobic digester. Solid-State fermentation is suitable for fungi growth and can accumulate cellulolytic...
2012 / Sheng-Shung Cheng, Yu-Chieh Chao, Son-Chi Wong, Chang-Chun Chen, Keng-Hao Yang, et al. -
A Tool-supported Approach towards Water Efficiency in Manufacturing
Abstract Many manufacturing companies fail to exploit hidden potentials in optimizing their water operations. This aspect is often shown by unorganized water efficiency effort with sub-optimal results. Against this background, the paper presents a...
2015 / D. Kurle, S. Thiede, C. Herrmann -
Processing Studies for the Development of a Manufacture Process for Intelligent Lightweight Structures with Integrated Sensor Systems and Adapted Electronics
Abstract The cross-industry trend towards efficient lightweight solutions continues unabatedly and leads to an increasing use of structural components made of fibre composites. At the same time, there is an increasing demand for the realization and...
2013 / W. Hufenbach, W.-J. Fischer, M. Gude, S. Geller, T. Tyczynski -
Production of Bio-oil via Fast Pyrolysis of Cassava Rhizome in a Fluidised-Bed Reactor
Abstract This article reports experimental results of fast pyrolysis of cassava rhizome (CR), in a fluidised-bed fast pyrolysis reactor unit incorporated with a hot vapour filter. The objective of this research is to investigate the effect of...
2012 / Suntorn Suttibak, Keartisak Sriprateep, Adisak Pattiya -
Study on an Improved Method of 3D Braided Composites Detection Based on Chaotic Cellular Neural Networks
Abstract To the rupture and deformation problems of 3D braided composites appearing in the space shuttle in the process of production, the Fiber Bragg grating sensors distributed Bragg gratings have been applied to the fields of 3D braided...
2012 / Baoshan Sun, Zhenkai Wan -
Fast Reactor Fuel Reprocessing Technology: Successes and Challenges
Abstract A structured development strategy, for realsing a robust Fast Reactor Fuel Reprocessing technology, is being pursued at the Indira Gandhi Center for Atomic Research (IGCAR), Kalpakkam. After two decades of R&D in many interdisciplinary...
2011 / R. Natarajan, Baldev Raj -
Development of Muscle-related Genes and Their Effects on Meat Quality
Abstract Myofibre is the basic unit of muscle tissue, muscle fibre types and the proportion of fibre types affected meat quality directly. Four adult MyHC isoforms have been identified in skeletal muscles, types I, IIa, IIx and IIb isoforms are...
2012 / Yueying Guo, Jing Li, Jin Shang, Ye Jin -
De-icing Method for Coupled Transmission Tower-Line System
Abstract For the disaster brought by the transmission line regelation, a new de-icing method is presented in this paper. It is supposed that the ice and transmission line are combined closely when there is no external loads, the composite structure...
2012 / Qu Cheng-Zhong, Liu Yue-Jun -
In-depth Analysis of Front Surface Passivation Properties for N-type IBC Silicon Solar Cells Using Advanced Simulation
Abstract Excellent front surface passivation is one of the key issues for interdigitated back contact (IBC) silicon solar cells. To create a better understanding of passivation properties and find the most important issues when developing...
2011 / C. Gong, K. Van Wichelen, E. Cornagliotti, N.E. Posthuma, J. Poortmans, et al. -
Prevailing Wind Direction Forecasting for Natural Ventilation djustment in Greenhouses Based on LE-SVM
Abstract It is necessary to predict wind speed and direction accurately for realizing optimal adjustment of natural ventilation in greenhouse climate control. Due to strong randomness of wind direction least squares support vector machine (LS-SVM)...
2012 / Yubing Yang, Yun Zhao -
State of the Art of Pyroprocessing Technology in Japan
Abstract Minor actinide recycling in a fuel cycle is a potential technology to minimize the environmental radioactivity burden in waste disposal in the fast reactor era after 2050. Pyroprocessing technology with metal electrorefining expects that no ...
2011 / Tadashi Inoue, Tadafumi Koyama, Yasuo Arai -
The Research on Flood Character Grid Base on GIS
Abstract Flood character grid is the most important part of the spatial information grid, which is used in the research of the model for flood disaster loss assessment. The implement of it's processing including: (1)Create a polygon class which has...
2012 / Xiaosheng Liu, Xiaosi Zhao