Materials engineering topic list of research papers
-
Simulation of Rolling Process of AZ31 Magnesium Alloy Sheet
Abstract To understand more about the rolling process of an AZ31 magnesium alloy sheet and the difference of simulation results between 2D and 3D, the rolling experiment of AZ31 was carried out and some useful data were obtained, and then the...
2014 / Di Liu, Zuyan Liu, Lumeng Wang -
An Experimental Study on a Microchannel Reactor for Fischer-tropsch Synthesis
Abstract In this study, a stainless steel microchannel reactor was applied in Fischer-Tropsch synthesis. The washcoating of γ-alumina on the stainless steel substrate needed two steps included a primary coating and a washcoating of alumina slurry...
2015 / Xiang Ying, Li Zhang, Hong Xu, Yanlun Ren, Jin Xuan -
A Review on Properties, Behaviour and Processing Methods for Al- Nano Al2O3 Composites
Abstract Nanotechnology is spreading vastly in the various demanding fields of engineering and medicines like aerospace, defence, automobiles, electronics, materials, chemistry, energy, environment, information & communication, consumer goods...
2014 / Dinesh Kumar Koli, Geeta Agnihotri, Rajesh Purohit -
Measurement of Local Strain Path and Identification of Ductile Damage Limit based on Simple Tensile Test
Abstract To estimate the strength of automotive bodies under impact loading and to predict the crack occurrence of high strength steel sheets, the local fracture strain and the ductile damage limit must be measured by experiments to provide data for ...
2014 / Ninshu Ma, Kenji Takada, Kentaro Sato -
Synthesis and thermoluminescence behavior of ZrO2:Eu3+ with variable concentration of Eu3+ doped phosphor
Abstract Cubical ZrO2 phosphor doped with the europium synthesized by conventional solid state synthesis method. The prepared phosphor was characterized by X-ray diffraction (XRD) technique, field emission gun scanning electron microscopy (FEGSEM)...
2014 / Raunak Kumar Tamrakar, Durga Prasad Bisen, Kanchan Upadhyay, Samit Tiwari -
Effect of Minimum Quantity Lubrication (MQL) on Surface Roughness of Mild Steel of 15HRC on Universal Milling Machine
Abstract In this research work, the effects of three parameters, namely, cutting speed, feed and depth of cut were studied upon Surface Finish during milling operation. The end milling was performed under the Minimum Quantity Lubrication condition...
2014 / S.B. Kedare, D.R. Borse, P.T. Shahane -
Twinning-like lattice reorientation without a crystallographic twinning plane2014 / Bo-Yu Liu, Jian Wang, Bin Li, Lu Lu, Xi-Yan Zhang, et al.
-
Optical assembly of bio-hybrid micro-robots2015 / Álvaro Barroso, Shirin Landwerth, Mike Woerdemann, Christina Alpmann, Tim Buscher, et al.
-
Study of Al2O3/SiC particle loading on the microstructural strengthening characteristics of Zn–Al2O3–SiC matrix composite coating
Abstract In this paper, the microstructure, and mechanical performance of Zn–Al2O3–SiC film co-deposited on mild steel substrate were produced by electrodeposition method. The structural characteristic of the composite coating was analyzed by...
2014 / O.S.I. Fayomi, A.P.I. Popoola -
Efficacy of Dielectrophoresis in Preventing Sedimentation of High Density Bio-particles in Micro-mixers
Abstract In recent years, various microfluidic devices and integrated micro fluidic systems such as bio-chips, lab-on-a-chip and microreactors have been the focus of intensive investigations. They are being increasingly applied for bio-medical...
2014 / Siddharth Mohan, Shankar Anand Deka, Niti Nipun Sharma -
Effect of Boron Carbide Powder Mixed into Dielectric Fluid on Electrical Discharge Machining of Titanium Alloy
Abstract Titanium alloys (Ti-6Al-4V) are extensively used in aerospace applications because of their excellent material properties such as high strength to weight ratio, corrosion resistance, and fracture resistance. It is observed that cutting and...
2014 / Murahari Kolli, Adepu Kumar -
The Use of Geometric Mechanics Concept at Kinematic Modeling in Mobile Robotics
Abstract The article deals with the issue of the use of geometric mechanics in mobile robotics. In the introductory part of article, basic notions are explained that frequently occurring in the concept of geometric mechanics. It contains the...
2014 / Tomáš Lipták, Alexander Gmiterko, Michal Kelemen, Ivan Virgala, Erik Prada, et al. -
Laser Spot Welding of Copper-aluminum Joints Using a Pulsed Dual Wavelength Laser at 532 and 1064nm
Abstract A modulated pulsed laser source emitting green and infrared laser light is used to join the dissimilar metals copper and aluminum. The resultant dynamic welding process is analyzed using the back reflected laser light and high speed video...
2014 / Peter Stritt, Christian Hagenlocher, Christine Kizler, Rudolf Weber, Christoph Rüttimann, et al. -
Application of Pulsating Hydroforming in Manufacture of Engine Cradle of Austenitic Stainless Steel
Abstract The effects of tube bending, preforming and subsequent hydroforming on formability of austenitic stainless steel in manufacture of engine cradle were studied in present study. Wall thickness distribution, surface quality and cross section...
2014 / Yong Xu, Shihong Zhang, Ming Cheng, Hongwu Song, Xiaosong Zhang -
Ultrastrong ductile and stable high-entropy alloys at small scales2015 / Yu Zou, Huan Ma, Ralph Spolenak
-
New Concept for Design and Control of 4 Axis Robot Using the Additive Manufacturing Technology
Abstract This work introduces a new concept for designing and manufacturing an industrial robot by using modern production techniques and a 3D modelling software. The most important requirements of this project were to build a customized,...
2015 / Mohamed Aburaia, Erich Markl, Kemajl Stuja -
DEM investigation of weathered rocks using a novel bond contact model
Abstract The distinct element method (DEM) incorporated with a novel bond contact model was applied in this paper to shed light on the microscopic physical origin of macroscopic behaviors of weathered rock, and to achieve the changing laws of...
2015 / Zhenming Shi, Tao Jiang, Mingjing Jiang, Fang Liu, Ning Zhang -
A Definition of Systems Thinking: A Systems Approach
Abstract This paper proposes a definition of systems thinking for use in a wide variety of disciplines, with particular emphasis on the development and assessment of systems thinking educational efforts. The definition was derived from a review of...
2015 / Ross D. Arnold, Jon P. Wade -
Synthesis of chiral polymorph A-enriched zeolite Beta with an extremely concentrated fluoride route2015 / Mingquan Tong, Daliang Zhang, Weibin Fan, Jun Xu, Liangkui Zhu, et al.
-
3D finite element simulations of high velocity projectile impact
Abstract An explicit three-dimensional (3D) finite element (FE) code is developed for the simulation of high velocity impact and fragmentation events. The rate sensitive microplane material model, which accounts for large deformations and rate...
2015 / Barış İrhan, Joško Ožbolt, Daniela Ruta