Materials engineering topic list of research papers
-
Density-of-states Fluctuation-induced Negative Out-of-plane Magnetoresistance in Overdoped Bi-2212
Abstract We analyzed the in-plane and out -of-plane m agnetoresistance (MR) f or o verdoped B i1.6Pb0.4Sr2CaCu2O8+δ (Bi-2212) s ingle crystals us ing s uperconductive f luctuation t heory, which considers the d ensity-of-states (DOS) contribution i...
2015 / Tomohiro Usui, Shintaro Adachi, Takao Watanabe, Terukazu Nishizaki -
A Seakeeping Analysis Method for T-Craft
Abstract The Transformable-Craft (T-Craft) is an innovative vessel serving as a connector between sea base and beachheads. When operatingat seas, the T-Craft is a surface effect ship (SES) with compartmented air cushions. To analysis the seakeeping...
2015 / Zhiqun Guo, Qingwei Ma, Hanbing Sun -
Sol-gel Synthesized Dielectric Films as a Diffusion Barrier to Rear Side Contact Metal
Abstract It is essential to mitigate the costs of cell production in order to achieve an increasing share of the industrial manufacture of advanced and more efficient solar cells. This work aims to contribute to the efficiency enhancement and cost...
2015 / Bilge Gündüz, Oliver Doll, Ingo Köhler, Jörg J. Schneider -
Structural Modifications, Elements and Equipment for Railway Noise Reduction
Abstract Traffic is one of the most important factors in environmental pollution also from the point of view of the noise emissions. Railway transport, which is economically and environmentally strongly accepted, stays before a requirement to...
2014 / Alžbeta Pultznerová, Libor Ižvolt -
High resolution simulations of energy absorption in dynamically loaded cellular structures2016 / R. E. Winter, M. Cotton, E. J. Harris, D. E. Eakins, G. McShane
-
Electronic Band Calculation of LaTSb2 (T=Cu,Ag,Au)
Abstract The series of compounds LaTSb2 (T=Cu,Ag,Au) show various electronic properties. In this paper we have calculated the electronic structure of LaTSb2 from first-principles. The obtained Fermi surfaces of LaAgSb2 show strong...
2014 / I. Hase, T. Yanagisawa -
Ultrasonic Study of Osmium and Ruthenium2009 / D. K. Pandey, Devraj Singh, P. K. Yadawa
-
Study of the Laser Remelting of a Cold Sprayed Titanium Layer
Abstract Cold Gas Dynamic Spray is an emerging coating technology based on the use of a supersonic gas jet to accelerate (up to 1000 m/s) and to impact a powder, with size ranging from 1 to 50μm in diameter, on a substrate. Due to the high speed,...
2015 / A. Astarita, S. Genna, C. Leone, F. Memola Capece Minutolo, F. Rubino, et al. -
Modeling of Increased Open Circuit Voltage through Localized Emitter Area on Silicon Solar Cells
Abstract A limited area p-n junction approach can increase the open circuit voltage (Voc) of silicon solar cells when the emitter recombination dominates. A limited area p-n junction silicon solar cell is designed and the effect of reducing emitter...
2015 / Peinan Teng, Xinrui An, Craig Johnson, Stuart Wenham, Thorsten Trupke, et al. -
Fabrication of Micro/Nanoelectrode Using Focused-ion-Beam Chemical Vapor Deposition, and its Application to Micro-ECDM
Abstract Micro electro-chemical discharge machining (micro-ECDM) is a key technology in the precision manufacturing. The electrode, which is the key element for achieving a high-precision ECDM, attracts the interests of many researchers. However,...
2016 / Dengji Guo, Xiaoyu Wu, Jianguo Lei, Bin Xu, Reo Kometani, et al. -
Mathematical Modeling of Microalgae–mineralization–human Structure within the Environment Regeneration System for the Biosphere Compatible City
Abstract Modern fast growing megacities and urban agglomerations exert extremely high environmental load. One of the biggest problems of megalopolises is the human organic waste disposal. Under current technology, waste utilization requires enormous ...
2014 / Natalia Buzalo, Pavel Ermachenko, Thomas Bock, Alexej Bulgakov, Alexander Chistyakov, et al. -
Recent Research Results of Physical Trapping Mechanism in CO2-brine System
Abstract Understanding the physical trapping mechanisms is important to design successful CO2 storage projects. The CO2 displacement processes have been investigated extensively by numerical modeling and laboratory experiments. We review the recent...
2015 / Bohao Wu, Xinhuan Zhou, Yongchen Song, Lanlan Jiang, Yu Liu, et al. -
Development of a Distributed Cooperative Vehicles Control Algorithm Based on V2V Communication
Abstract This paper presents a new distributed Cooperative Vehicles Control (CVC) algorithm without any infrastructure. The algorithm is developed to manipulate individual vehicles’ travelling maneuvers based on V2V communication, so that vehicles...
2016 / Yi Zheng, Lisheng Jin, Linlin Gao, Keyong Li, Yan Wang, et al. -
Overlapped flowers yield detection using computer-based interface
Summary Precision agriculture has always dealt with the accuracy and timely information about agricultural products. With the help of computer hardware and software technology designing a decision support system that could generate flower yield...
2016 / Anuradha Sharma, Vijay Kumar Sharma -
EM Algorithm for Truncated and Censored Poisson Likelihoods
Abstract The aim of this study is to find the maximum likelihood estimate (MLE) among frequency count data by using the expectation-maximization (EM) algorithm in which is useful to impute the missing or hidden values. Two forms of missing count...
2016 / Chukiat Viwatwongkasem -
An experimental study on mechanical properties of epoxy-matrix composites containing graphite filler
Abstract The current work studies the effect of the incorporation of different amounts of graphite filler on the mechanical properties of epoxy resin and of carbon fiber reinforced epoxy composites. Graphite-reinforced epoxy-matrix composites were...
2016 / Ricardo Baptista, Ana Mendão, Mafalda Guedes, Rosa Marat-Mendes -
Failure mode analysis of two diesel engine crankshafts
Abstract A failure analysis of two damaged crankshafts are presented: one obtained from a diesel engine of a mini backhoe, and another one from an automobile vehicle. The diesel motor suffered a serious mechanical damage after 3 years and 5000 hours ...
2016 / M. Fonte, V. Infante, M. Freitas, L. Reis -
Deposition Of Oxide And Intermetallic Thin Films By Pulsed Laser (PLD) And Electron Beam (PED) Methods2015 / J. Kusiński, A. Kopia, Ł. Cieniek, S. Kąc, A. Radziszewska
-
"Adventures at the Bench"2008 / Christopher Corti
-
Using Product and Manufacturing System Platforms to Generate Producible Product Variants
Abstract Product platforms have proven efficient as a means to reduce lead-time and increase product quality simultaneously. When using platforms to generate a family of products, the number of variants that need to be managed in manufacturing...
2016 / Jonas Landahl, Christoffer Levandowski, Hans Johannesson, Rikard Söderberg, Kristina Wärmefjord, et al.